FOS Technologies Roller 7R Manuale utente

FOS Roller 7R

PRODUCT SPECIFICATIONS

TECHNICAL SPECIFICATION

Voltage: 110/240 Volt AC, 50/60 Hz.

Power Consumption: 230 Watt.

Light Source: 7R 230 Watt lamp.

Effects: Radial beam effects, with different colors & gobos, variable speed of the barrel and Pan / Tilt

barrel movement.

Colors: 13 dichroic filters + Open White, with bicolor function and rainbow effect.

Gobos: 14 gobos + Open, with shake and scroll functions.

Control: DMX, Auto & Sound control modes.

DMX Channels: 8.

Protection Class: IP20 (for indoor use only)

Dimensions: 440 x 230 x 280 mm

Weight: 6,9 Kg

SAFETY WARNING

This product must be installed by a qualified professional. All maintenance must be carried out by a

qualified electrician. Always disconnect the power before carrying out any maintenance. The earth must

always be connected to the ground. Ensure that all parts of the equipment are kept clean and free of

dust.

The product is designed for indoor use only. Keep it away from water, moisture, extensive

heat, humidity and dust. Do not install the product directly on to flammable objects.

Always connect the product to nominal voltage and frequency. Do not connect the device to

dimmers.

PROTECTION AGAINST SOLIDS AND

WATER

Only for IP-rated fixtures

The protection level of a housing is set by applied standards. For classification there is used the IP-Code.

It contains the declaration „IP“and two following numbers. The first number characterizes the protection

against harmful effects of solids, the second is rating the water protection. It is important to distinguish

whether encapsulation and harmful effect! There can be housing that is not capsuled completely but still

avoids harmful effect of solids or water.

PROTECTION EXAMPLES:

IP20: Protection against intruding objects >12,5mm „Finger protected “; No waterproofing. TYPICAL

PROTECTION FOR INDOOR USE FIXTURES

IP33: Protection against intruding objects >2,5mm; Falling water within an angle of 60° has no harmful

effect TYPICAL PROTECTION OF LED-LIGHTS USING RECESSED POWERCON AND DMX SOCKET. This

protection is linked to the mounting position of the fixture and always refers to typical mounting situation

like a Floor spot used standing on the ground.

IP54: complete protection against solids and low-pressure water from any side THIS TYPE OF FIXTURES

CAN BE USED UNDER NORMAL OUTDOOR CONDITIONS.

IP65: shielded against dust and pressurized water from any side. TYPICAL PROTECTION FOR OUTDOOR

RATED EVENTFIXTURES USING WATERPROOFED POWER AND SIGNAL LINK.

IP67: shielded against dust and protected for accidental briefly submerge. PROTECTION AGAINST

ACCIDENTIAL SUBMERGING ON TEMPORARY FLOODED AREA.

TEMPORARY USE

Event equipment is designed for temporary use. This are typical purpose as concerts, festivals, theatre,

clubs and disco use and referable venues. Long-term use, specially under outdoor conditions and fixed

outdoor installation can bring damage in aging materials and affect the coated surface. Sealings as well

as cables are made from rubber material and will age by long-term UV-emission as sunlight and should

be checked frequently.

LIMITATIONS OF IP PROTECTION

IP-Rating doesn´t mean unlimited outdoor use and protection against any kind of environmental

influence! Especially sunlight and included UV will bring accelerated aging. Some fixtures need special

parts or processes to fit the rated IP-Protection, like mounting covers or caps or similar. Sealings and

other plastic or rubber materials are aging parts. They must be checked frequently to ensure the

protection and safety of the fixtures. Also specified torque of screws can affect protection!

Warning

NOTE!If the signal cable is over 60 m between the DMX512 controller and fixture or between

two fixtures, then a DMX signal amplifier is needed as well.

Menu Screen

You can easily navigate through menu’s options with the four buttons under the screen. Navigating in the

menu is simple! With the Up / Down buttons, you are moving through menu’s choices, pressing Enter,

you are entering the sub menu of the option you have chosen, with the Up / Down buttons you’re moving

through the sub menu’s options, with Enter, you are confirming your choice. The FOS Roller 7R offers the

following options:

Main Menu:

System Setting:

1. DMX Address

2. Lamp Control

•On

•Off

3. Lamp Power

•On

•Off

4. No Signal

•Auto Program

•Sound Mode

•Hold

•Close Shutter

5. Pan Reverse

•Yes

•No

6. Tilt Reverse

•Yes

•No

7.Mic. Level

8.Display Reverse

•Yes

•No

9.Language

•English

•Chinese

10. Factory Settings

•Yes

•No

Information

1. Current Hours

2. Life Hours

3. Last Run Hours

4. Timer Password

5. Clear Time

6. Temperature

Reset

1. Reset All

2. Reset Scan

3. Reset Other

Manual Control:

1. Manual DMX:

•Auto Program

•Pan

•Tilt

•Color

•Gobo

•Rot. Barrel

•Strobe

•Dimmer

2. Fix Position

3. Internal Program:

•Alone

•Master

Channel Modes

8 Channels

1. Pan

2. Tilt

3. Barrel Rotation

•0 – 7 No rotation.

•8 – 127 CW Rotation from fast to slow.

•128 – 135 No rotation.

•136 – 255 CCW Rotation from slow to fast.

4. Color Wheel

•0 – 4 Open White

•5 – 9 Red

•10 – 14 Red & Orange

•15 – 19 Orange

•20 – 24 Orange & Cyan

•25 -29 Cyan

•30 – 34 Cyan & Green

•35 – 39 Green

•40 – 44 Green & Light Green

•45 – 49 Light Green

•50 – 54 Light Green & Pink

•55 – 59 Pink

•60 – 64 Pink & Yellow

•65 – 69 Yellow

•70 – 74 Yellow & Magenta

•75 – 79 Magenta

•80 – 84 Magenta & Deep Blue

•85 – 89 Deep Blue

•90 – 94 Deep Blue & Warm

•95 – 99 Warm

•100 – 104 Warm & CTO

•105 – 109 CTO

•110 – 114 CTO & CTB

•115 – 119 CTB

•120 – 124 CTB & Dewberry

•125 – 127 Dewberry

•128 – 189 CW Rainbow from fast to slow

•190 – 193 Rotation Stops

•194 – 255 CCW Rainbow from slow to fast

5. Gobo Wheel

•0 – 7 Open

•8 – 15 Gobo 1

•16 – 23 Gobo 2

•24 – 31 Gobo 3

•32 – 39 Gobo 4

•40 – 47 Gobo 5

•48 – 55 Gobo 6

•56 – 63 Gobo 7

•64 – 71 Gobo 8

•72 – 79 Gobo 9

•80 – 87 Gobo 10

•88 – 95 Gobo 11

•96 – 103 Gobo 12

•104 – 111 Gobo 13

•112 – 119 Gobo 14

•120 – 126 Gobo 1 Shake

•127 – 133 Gobo 2 Shake

•134 – 140 Gobo 3 Shake

•141 – 147 Gobo 4 Shake

•148 – 154 Gobo 5 Shake

•155 – 161 Gobo 6 Shake

•162 – 168 Gobo 7 Shake

•169 – 175 Gobo 8 Shake

•176 – 182 Gobo 9 Shake

•183 – 189 Gobo 10 Shake

•190 – 196 Gobo 11 Shake

•197 – 203 Gobo 12 Shake

•204 – 210 Gobo 13 Shake

•211 – 217 Gobo 14 Shake

•218 – 255 CW Rotation

6. Shutter

•0 – 127 Shutter closed

•128 – 191 Strobe Effect from slow to fast

•192 – 255 Shutter Open

7. Dimmer

8. Functions

•0 – 15 No function

•16 – 31 Lamp On

•32 – 47 Lamp Off

•48 – 63 All motor reset

•64 – 79 Mirror motors reset

•80 – 95 Wheels motor reset

•96 – 111 Linear color change

•112 – 127 Linear gobo change

•128 – 143 Program 1

•144 – 159 Program 2

•160 – 175 Program 3

•176 – 191 Program 4

•192 – 207 Program 5

•208 – 223 Program 6

•224 – 239 Program 7

•240 – 255 No function

General Information

Replacing a fuse:

Always disconnect the fixture from main power before replacing a fuse. Use only the appropriate fuse,

with the same type and rating. A fuse with different rating, can damage the fixture in case of failure.

Risk of electric shock and / or fire:

The fixture must be earthed, supplied always with its nominal voltage and cleaned periodically from dust.

For cleaning use only, a moist cloth. Never use liquids or force water. After cleaning, let the fixture dry

before use.

Indice

Altri manuali FOS Technologies Attrezzatura per DJ

FOS Technologies

FOS Technologies Wash LED Quad III Manuale utente

FOS Technologies

FOS Technologies ZOOM 2825 Manuale utente

FOS Technologies

FOS Technologies 12R Hybrid PRO Manuale utente

FOS Technologies

FOS Technologies FOS 12R Hybrid Manuale utente

FOS Technologies

FOS Technologies Pixel Blade Ultra Manuale utente

FOS Technologies

FOS Technologies Wash 360 LED Manuale utente

FOS Technologies

FOS Technologies FOS 12R Hybrid Manuale utente

FOS Technologies

FOS Technologies FOS 20W RGB Manuale utente

FOS Technologies

FOS Technologies FOS Wash LED Quad II Manuale utente

FOS Technologies

FOS Technologies TOURING PAR IP HEX Manuale utente

FOS Technologies

FOS Technologies FOS Spot 150W Manuale utente

FOS Technologies

FOS Technologies 150W LED Spot Manuale utente

FOS Technologies

FOS Technologies FOS Glow Manuale utente

FOS Technologies

FOS Technologies SuperStorm L006796 Manuale utente

FOS Technologies

FOS Technologies Co2 LED DMX Manuale utente

FOS Technologies

FOS Technologies FOS Spot 40W Manuale utente

FOS Technologies

FOS Technologies L004503 Manuale utente

FOS Technologies

FOS Technologies FOS ACL Line 12 Manuale utente

FOS Technologies

FOS Technologies FOS PAR 7x15 6 in 1 Manuale utente

FOS Technologies

FOS Technologies FOS Ultra Par Manuale utente

FOS Technologies

FOS Technologies PAR COB 200W LED TW Manuale utente

FOS Technologies

FOS Technologies Luminus Manuale utente

FOS Technologies

FOS Technologies A10-FB4 Manuale utente

FOS Technologies

FOS Technologies FOS HYDRO BSW Manuale utente

Manuali Attrezzatura per DJ popolari di altre marche

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuale del proprietario

Chauvet

Chauvet OVATION E-930VW Manuale utente

Zumtobel

Zumtobel APHRODITE Home Manuale utente

Snow Masters

Snow Masters Zig Oscillator Manuale utente

EuroLite

EuroLite 50530554 Manuale utente

Beamz

Beamz BUV243 Manuale utente

thomann

thomann Stairville DJ Lase 40-G MK-III Manuale utente

Eagletone

Eagletone 6 Eyes Flower Manuale utente

EuroLite

EuroLite FLD-1508 Manuale utente

Technical Pro

Technical Pro LG8xSEA Manuale utente

JB Systems

JB Systems Lounge Laser DMX Manuale utente

Lightmaxx

Lightmaxx Vega Halo 90 Manuale utente

Elation

Elation FUZE WASH Z350 Manuale utente

Maverick

Maverick MK3 WASH Manuale utente

Infinity

Infinity TF-260C7 Fresnel Manuale utente

Chauvet

Chauvet EVE E-50Z Manuale utente

Eliminator Lighting

Eliminator Lighting E 138 Manuale utente

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuale utente