How to Connect
1. Use a HDMI cable to connect a HD source to the HDMI Input Port.
2. Use the built-in HDMI cable to connect a HD display.
3. Connect USB Power Cable to a Power Adapter (not included).
4. Connect other end of USB Power Cable into switch.
Remote Control
HDMI x 5
HDMI x 1
4K x 2K @24/25/30/60 fps@60Hz, 3D(1080p@60fps
@60Hz) 1080p@60fps@120Hz
DTS-HD, Dolby-trueHD, LPCM7.1, DTS,
Dolby-AC3, DSD
300 MHz max
8 Gbps max
Yes
Yes
Yes, via HDMI to DVI adapter (not included)
≤50ft/15m AWG24 HDMI standard cable
32°F to 158°F / 0°C to 70°C
5% to 90% RH (No Condensation)
Audio and Video
Environmental
Input
Output
Resolution
Up to 36-bit deep color
Color Depth
Audio Format
Pixel Clock Rate
Total TMDS Throughput
Signal Retiming
EDID RAM
Digital Visual Interface (DVI)
Input Cable Recommendation
≤66ft/20m AWG24 HDMI standard cable
Output Cable Recommendation
Operating Temperature Range
Operating Humidity Range
200mA
Mechanical
Power
Maximum Working Current
3.98 x 3.35 x 0.81in / 101 x 85 x 20.5mm
1.76oz / 50g
Dimension (L x W x H)
Weight
Package IncludesSpecications
•1x Fosmon 5x1 HDMI Switch
• 1x USB Power Cable
• 1x Infrared Red Receiver
• 1x Remote Control
•1x User Manual
1 2
3
4 5
Front Back
Remote Battery Installation
1. Pull out remote and battery
2. Use ngernail to pull out battery tray
3. Place Battery into tray, matching (+) symbols
4. Push tray back into remote
Using Remote
1. Connect IR blaster into HD8192
2. Button < toggles Input sources in descending order
3. Button > toggles Input sources in ascending order
4. Buttons 1, 2, 3, 4, 5 correspond to the Input sources respectively
