Foton Accessories KOLIBER Manuale utente
„KOLIBER” MOTORIZED PAN/TILT HEAD
User Manual
Contents
Introduction 2
Product features 3
Technical details 5
The contents of the set 6
Safety 7
Assembly and installation 9
Start up, functions 15
Disassembly 20
Maintenance and cleaning 20
Transport and storage 20
Warranty 21
Introduction
After performing a detailed analysis of customer needs we constructed
a Head, which is extremely lightweight, durable, precise and versatile.
Through innovative solutions, we have created a product that quickly became
recognized as the best in the ranking of this type of equipment.
High quality workmanship and use of high quality materials ensure long
and trouble free operation. The Head is dedicated mainly to the F amingo
Duo camera crane. By using mounting holes with 3/8” thread, it works
perfectly well with other camera cranes as well.
Thank you for choosing the Koliber Head!
Foton Accessories Team
2
Product features
Ko iber
Head
Advanced laser treatment and the use of appropriately hard materials
helped to create a head that weighs only 1.6 kg! High precision of the
component parts made it possible to build a very compact and perfectly fitted
construction. All moving parts are based on double bearings what ensures
extremely smooth operation.
•works with equipment up to 4 kg,
•weighs only 1.6 kg,
•internal clearance: 37 cm x 22 cm,
•maximum size of mounted device in cm: 22 wide, 23 high, 42 long,
•two independent rotary axis: horizontal and vertical,
•through holes for steering cords, which allows to turn the head full 360°
in both axes and completely eliminates the problem of steering cords
and power cords getting tangled; the through holes on both axes are
25 mm diameter,
•rotating speed of each axis regulated from 7 s to 8 min per full turn,
•the base module contains 3 assembly openings (3/8") enabling the
head assembly on any device such as camera cranes, tripods or sliders.
•driving sets have easily regulated tooth belt stringing,
•applied regulation lets you mount most models of camcorders, which
means that your equipment is fast and precisely balanced,
•the driving wheel is coupled with tooth belts, which provides for high
performance culture,
•equipped with steering and power cords organizers,
•drive engines have noise protection screens, which eliminates
undesired noises,
•mains power supply with the attached power adapter or optionally
powered by 7 14 V battery,
•protective modules of engines prevent mechanical damage at work and
in transport,
•equipped with a control level.
3
Condor
Contro er
The heart of the Controller is an advanced microprocessor set making
sure that the head works perfectly. A unique driving software manages the
energy given to engines in an outstanding manner; even at low speed and
heavy load they work optimally and smoothly.
Thanks to autocalibration feature, every time you turn on the Controller
(after 2 s) the joystick is automatically placed at 0 (resting) point. This
function effectively eliminates the so called slow swimming effect of the
engines at resting point of the joystick. Autocalibration further prevents an
accidental and quick start up of the Head after the device has been turned
on.
The Head features an innovative and practical autopanorama function.
It lets you move the camera constantly and stably in horizontal 360° axis.
The speed is regulated by a knob and has a range from 7 s to 8 min per full
turn. After the parameters have been set up, you start the Head by pressing
the button on the control panel. In autopanorama function, you can adjust
the speed and turning direction in real time.
The controller also has a practical function of head movement memory,
the so called memory bank. A registered material may be played and
rewound on demand or played in a continuous loop.
Controller functions:
•a joystick operating in both axes,
•smooth, independent regulation of each axis speed,
•quick on/off axis movement controlled by a switch,
•reverse movement direction in each axis independently,
•5 levels of gradually regulated RAMP functions (inertial speed up and
slow down of the Head movement); additionally acts as a protection
from mechanical and electrical damage,
•autopanorama function,
•multifunctional memory bank,
•Linear/Logarithmic joystick switch,
•all functions are visualized by Controller diodes,
•power supply, tractor signal supply, and main switch are installed at the
back part of the casing.
4
Technica detai s
•Load capacity: 4 kg,
•Head weight: 1.6 kg,
•Size: 48 cm x 37 cm
•Maximum size of mounted device in cm: 22 wide x 23 high x 42 long,
•Internal space size: 37 cm x 22 cm,
•Through holes at each axis: 25 mm diameter,
•Turn range in both axes: 360°,
•Speed at both axes: 7 sec 8 min per turn,
•Voltage: 7 14 V DC,
•Sony NP F970 Li Ion battery life: 10 hours,
•Main construction material: hard aluminum,
•Top layer: paint powder coating, anodized surface,
•Protection Rating IP 41.
5
Contents of the set
1.
Koliber
motorized Pan/Tilt Head,
2. double quick release system for safe
mouting,
3. 1 x 1/4" screw and 1 3/8" screw for assembly
of recording device,
4.
Condor
Controller with a battery handle,
5. power adapter for NP Fxxx batteries with a charger,
6. AC adapter,
7. protective bag with additional pockets for accessories,
8. Allen key for registering device balancing,
9. signal cord, 2.5 m long.
6
1.
4.
6.
8.
9.
7.
2.
3.
5.
Safety
Read the user manual before starting work with the Koliber Head.
To avoid harm to the operator and others around the Head should be
mounted properly and securely to lifting device: crane, tripod, etc.
The Head is open mechanical system, we recommend that you keep
extreme caution. Do not put fingers or other body parts near the
movable elements of the Head when the Controller is switched on.
The operator should be aware that physical contact with moving parts of the
device while operating can result in wounds or other injuries.
The product is designed to work in interiors and exteriors as well.
Moisture can damage the device and result in danger for the
operator.
The Head is adapted to operate in 360°. The user should control the
scope of the turns and should prevent the cables to be twisted.
All cables used to work with the Head, video preview and others, should be
installed in accordance with this manual.
After assembling the Head to the camera crane it should be secured
by locking two security knobs.
The controller system has the function of informing the user of the
7
product failure or invalid status when 2 control diodes of the controller blink
simultaneously. If a failure or mechanical damage is observed, consult the
producer immediately. Otherwise, the producer is not liable for the proper
and safe usage of the Head.
There is a danger of explosion in case of using batteries other than
suggested. It is allowed to swap battery for other of the same type
(Sony, NP Fxxx series).
Battery soul be never left in direct sun light or other heating
conditions which may warm it up or above 50° C.
8
Assemb y and insta ation
I. Mounting the Head on the camera crane.
1. For proper and safe mounting of the Head on the camera crane, it should
be attached with double quick release system and then secured by locking
two safety knobs.
SECURITY
KNOBS
9
2. All cables signal, video preview, camera movement, etc. should be fixed
so operating the Head in both axes is easy and safe. Example below.
10
Indice
Altri manuali Foton Accessories Accessori video professionali
