Freecom FC TapeWare AIT-450i Manuale utente

Notice

document may be photocopied, reproduced or translated to another language without prior written consent of

Sony. The information contained in this document is subject to change without notice.

SONY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS DOCUMENT. Sony shall not be liable

for errors contained herein, or indirect, special, incidental or consequential damages in connection with the

furnishing, performance, or use of this document.

For further information , please contact the appropriate Sony location listed below;

Sony Corporation

Electronic Devices Marketing Group

Tape Streamer Marketing Section

Gate City Osaki West Tower

Osaki East Tec.

1-11-1 Osaki Shinagawa-ku, Tokyo, 141-0032 Japan

TEL: (81) 3-5435-3486 FAX: (81) 3-5435-3565

Sony Korea Corporation.

34F, ASEM Tower, World Trade Center, 159-1

Samsung-Dong, Kangnam-Ku, Seoul, 135-798 Korea

TEL: 82-2-6001-4249

Sony Electronics Inc.

3300 Zanker Road, San Jose, California 95134,

U.S.A.

TEL: (1) 408-432-1600 FAX: (1)408-955-5533

TLX: 171331 SJESONY

Sony Taiwan Limited, ODS Dept. DS Sect.

5F, 145 Changchun Road, Taipei 104, Taiwan

TEL: (886) 2-2522-7953 FAX: (886) 2-2522-2237

Sony Europe Semiconductor &

Electronic Solutions

The Heights, Blookland, Weybridge, Surrey KT13

OXW

TEL: (01932) 81-6000 FAX: (01932) 81-7001

Sony Corp. of Hong Kong Ltd. Beijing Rep. Office

Electronic Device Marketing Hong Kong, Computer

Peripheral Division

Tower A, 11/F Full Link Plaza, No.18

Chaoyangmenwai Ave., Beijing, 100020 P.R.C.

TEL: 86-10-6588-0633 FAX: 86-10-6588-0855

Sony of Canada Ltd.

Communications & Information Systems Group

Storage Marketing

115 Gordon Baker Road

Toronto, Ontario M2H 3R6

TEL: (416) 499-1414 FAX: (416) 495-3331

Sony Recording Media & Energy Latin America

Storage Drive Group

5201 Blue Lagoon Drive Suite 390

Miami, FL 33126, U.S.A.

TEL: (1) 305-260-4027 FAX: (1)305-260-7850

Sony Electronics Singapore Pte Ltd

Electronic Devices Marketing (Singapore)

Computer Peripherals Division Enterprise

Storage Solutions Department

2 International Business Park #01-10

Tower One The Strategy Singapore 609930

TEL: +65 6544 7322 FAX: +65 6544 7392

Sony Brasil Ltda.

Informatica Division

Rua Inocencio Tobias, 125-Bloco A 01144-000

Sao Paulo, SP Brazil

TEL: (55) 11-3613-9140 FAX: (55) 11-9158-8200

Changing List

Page Clause Title Modify Add Delete Remarks

SDX-450V Series Ver. 1.0 SEPTEMBER, 2004 (RELEASE)

This page intentionally left blank.

SDX-450V series Ver.1.0 Table of Contents

Table of Contents

1. Introduction

1.1. About this Product Specification Manual 1- 1

1.2. Introducing the SONY AIT Technology 1- 1

1.3. Features of the Drive 1- 2

1.4. Reference 1- 3

1.4.1. How to get ECMA-222, 246, 291 Standard Document 1- 3

2. Specifications

2.1. Specifications 2- 1

2.1.1. Dimensions 2- 1

2.1.1.1. Mounting Holes 2- 2

2.1.2. Weight 2- 4

2.1.3. Connectors 2- 4

2.1.3.1. SCSI Cables and Terminators 2- 4

2.2. Environmental Specifications 2- 4

2.2.1. Temperature and Humidity Range 2- 4

2.2.2. Altitude 2- 5

2.2.3. Suspected Particulate 2- 5

2.2.4. Vibration 2- 5

2.2.5. Shock 2- 5

2.2.6. Acoustic Noise 2- 5

2.2.7. EMC 2- 5

2.2.8. Orientation 2- 5

2.3. Performance Specification 2- 6

2.3.1. Data Capacity 2- 6

2.3.2. Data Transfer Rate 2- 7

2.3.2.1. Sustained Data Transfer Rate to and from the Tape 2- 7

2.3.2.2. Burst Transfer Rate to and from the SCSI Bus 2- 7

2.3.3. Initialize Time 2- 7

2.3.4. Load Time 2- 7

2.3.5. Unload Time 2- 7

2.3.6. Search Time 2- 7

2.3.7. Rewind Time 2- 8

2.3.8. Error Rate 2- 8

2.3.9. Retry Limits on Rewrites 2- 8

2.3.10. Definition of Failure 2- 8

2.3.11. Mean Time Between Failures 2- 8

2.3.12. Mean Time to Repair 2- 8

2.3.13. Component Life 2- 8

2.3.14. Durability 2- 8

2.4. Safety 2- 9

2.4.1. Conditions ofAcceptability 2- 9

2.5. Installation Requirements 2- 9

2.5.1. Power Requirements 2- 9

2.6. Data Compression 2- 10

SDX-450V series Ver.1.0 Table of Contents

3. Installation

3.1. Installation Guide 3- 1

3.1.1. SCSI ID Number Jumper 3- 2

3.1.2. Termination Power Switch 3- 2

3.1.3. Parity Disable Jumper 3- 3

3.1.4. Data Compression ON Switch 3- 3

3.1.5. Power Connector 3- 3

3.1.6. SCSI 68 pin Connector 3- 3

3.1.7. Attaching and Removing the Dust Cover 3- 6

3.1.7.1. Attaching the Dust Cover 3- 6

3.1.7.2. Removing the Dust Cover 3- 7

4. Operation

4.1. Summary of LED Indications 4- 1

4.2. Operator Action 4- 2

4.2.1. Powering up the SDX-450V 4- 2

4.2.2. Inserting Cassettes 4- 2

4.2.3. Removing Cassettes 4- 2

4.2.4. Hard Reset Hole 4- 2

4.2.5. Write-Protecting Cassettes 4- 2

4.3. Internal Function 4- 3

4.3.1. The Load Sequence

(Effective for SDX-T3N,TAITE-20N and TAIT1-40N) Refer to

12.2.1. Fast Media Load/Unload (Effective for SDX1-25C,

SDX1-35C and TAIT1-40C, MIC cassette)

4- 3

4.3.2. The Unload Sequence

(Effective for SDX-T3N,TAITE-20N and TAIT1-40N) Refer to

12.2.1. Fast Media Load/Unload (Effective for SDX1-25C,

SDX1-35C and TAIT1-40C, MIC cassette)

4- 3

4.3.3. Power-Fail or SCSI Reset Handling 4- 3

4.3.4. Diagnostic and Normal Status Displays 4- 4

4.3.4.1. Diagnostic Status Display 4- 4

4.3.4.2. Normal Status Display 4- 4

4.4. Tape Format 4- 5

4.4.1. Tape Partitions 4- 5

4.4.1.1. Formatting partitions 4- 5

4.5. Maintenance, Troubleshooting and Service 4- 6

4.5.1. Head Cleaning 4- 6

4.5.1.1. Message when cleaning cassette is necessary 4- 6

4.5.1.2 The condition of cleaning request 4- 6

4.5.1.3. Usage of cleaning cassette 4- 6

4.5.2. Troubleshooting Guide 4- 6

4.5.2.1. Operational Problems 4- 6

4.5.2.2. Read/Write Problems 4- 9

4.5.2.3 Replace Tape 4- 9

4.5.2.4. Media Warning 4- 9

SDX-450V series Ver.1.0 Table of Contents

4.5.3. Clearance for Service 4- 9

4.5.4. Packaging for Return to Sony 4- 9

5. SCSI Interface

5.1. Introduction 5- 1

5.1.1. Overview of the SCSI Interface 5- 1

5.1.2. Supported Messages 5- 1

5.1.3. Supported and Unsupported Commands 5- 1

5.2. SCSI BUS Operation 5- 2

5.2.1. Typical SCSI Operation 5- 2

5.2.2. Disconnect 5- 3

5.3. Message Specification 5- 4

5.3.1. COMMAND COMPLETE (00h) 5- 4

5.3.2. EXTENDED MESSAGE (01h) 5- 5

5.3.2.1. SYNCHRONOUS DATATRANSFER REQUEST (01h) 5- 5

5.3.2.2. WIDE DATATRANSFER REQUEST 5- 6

5.3.3. SAVE DATAPOINTER (02h) 5- 8

5.3.4. RESTORE POINTERS (03h) 5- 8

5.3.5. DISCONNECT (04h) 5- 8

5.3.6. INITIATOR DETECTED ERROR (05h) 5- 8

5.3.7. ABORT (06h) 5- 9

5.3.8. MESSAGE REJECT (07h) 5- 9

5.3.9. NO OPERATION (08h) 5- 9

5.3.10. MESSAGE PARITY ERROR (09h) 5- 9

5.3.11. BUS DEVICE RESET (0Ch) 5- 9

5.3.12. IDENTIFY (80h-FFh) 5- 10

5.3.13. IGNORE WIDE RESIDUE (23h) 5- 10

5.4. Status Specification 5- 10

6. Command Specification

6.1. ERASE 19h 6- 2

6.2. INQUIRY 12h 6- 3

6.3. LOAD / UNLOAD 1Bh 6- 8

6.4. LOCATE 2Bh 6- 9

6.5. LOG SELECT 4Ch 6- 10

6.6. LOG SENSE 4Dh 6- 12

6.6.1. The Log Page Descriptor 6- 14

6.6.2. The Log Parameter Descriptor 6- 15

6.6.3. Supported Log Pages 6- 16

6.6.3.1. Summary List of Supported Pages 6- 17

6.6.4. Write and Read Error Counters Pages 6- 17

6.6.5. Last N Error Events List 6- 18

6.6.6. Tape Log Page (Sony Unique) 6- 19

6.6.7. Tape Capacity Log Page 6- 21

6.6.8. Drive Usage Log Page (Sony Unique) 6- 22

6.6.9. Read and Write Frame Error Counter Page 6- 23

SDX-450V series Ver.1.0 Table of Contents

6.6.10. Data Compression Transfer Log Page 6- 24

6.6.11. AIT Log Page (3Ch) 6- 25

6.6.12. MIC Fixed Length Information page (3Dh) 6- 28

6.6.13. MIC Variable Length Information Page (3Eh) 6- 33

6.7. MODE SELECT 15h 6- 35

6.7.1. Disconnect-Reconnect Page (02h) 6- 38

6.7.2. Data Compression Control Page (0Fh) 6- 39

6.7.3. Device Configuration Page (10h) 6- 41

6.7.4. Medium Partitions Parameter Page (11h) 6- 43

6.7.5. Medium Partitions Parameter Page

(for multi-partitioned tapes)(11h) 6- 45

6.7.6. Informational Exceptions Control Page (1Ch) 6- 48

6.7.7. AIT Device Configuration Page (31h) 6- 49

6.7.8. Append Partition (32h) 6- 51

6.7.9. Delete Partition (33h) 6- 54

6.8. MODE SENSE 1Ah 6- 58

6.8.1. Mode Sense 31h (AIT Device Configuration Page) 6- 60

6.9. PERSISTENT RESERVE IN 5Eh 6- 61

6.10. PERSISTENT RESERVE OUT 5Fh 6- 65

6.11. PREVENT ALLOW MEDIUM REMOVAL 1Eh 6- 67

6.12. READ 08h 6- 68

6.13. READ BLOCK LIMITS 05h 6- 70

6.14. READ BUFFER 3Ch 6- 71

6.15. READ POSITION 34h 6- 73

6.16. RECEIVE DIAGNOSTIC RESULTS 1Ch 6- 75

6.17. RELEASE UNIT 17h 6- 77

6.18. REPORT DENSITY SUPPORT 44h 6- 78

6.19. REPORT LUNS A0h 6- 81

6.20. REQUEST BLOCK ADDRESS 02h 6- 82

6.21. REQUEST SENSE 03h 6- 83

6.22. RESERVE UNIT 16h 6- 91

6.23. REWIND 01h 6- 92

6.24. SEEK BLOCK 0Ch 6- 93

6.25. SEND DIAGNOSTIC 1Dh 6- 94

6.26. SPACE 11h 6- 96

6.26.1. CHECK CONDITION 6- 98

6.26.2. Sony SDX-450V Unique Implementation for SPACE 6- 98

6.26.2.1. Super High Speed Search 6- 98

6.26.2.2. Data Buffer Management 6- 98

6.27. TEST UNIT READY 00h 6- 99

6.28. VERIFY 13h 6- 100

6.29. WRITE 0Ah 6- 102

6.30. WRITE BUFFER 3Bh 6- 104

6.31. WRITE FILEMARKS 10h 6- 106

SDX-450V series Ver.1.0 Table of Contents

7. Drive Diagnostics

7.1. Overview 7- 1

7.2. Diagnostic Test 7- 1

7.2.1. Power-on Self Test 7- 1

7.2.2. SEND DIAGNOSTIC command – Self Test 7- 2

7.2.3. SEND DIAGNOSTIC command – Individual Test 7- 2

7.2.4. Diagnostic Test Number Summary 7- 3

7.2.5. RECEIVE DIAGNOSTIC RESULT command 7- 4

7.2.6. Diagnostics Results Reference 7- 6

7.2.7. Diagnostic Tests RequiringAdditional Parameters 7- 7

7.2.7.1. Error Rate Test (02) Diagnostic Parameters 7- 7

7.2.7.2. Read Data Exerciser (43h) Diagnostic Parameters 7- 8

8. Appendix A: ASC & ASCQ Alphabetic Order 8- 1

9. Appendix B: ASC & ASCQ Numeric Order 9- 1

10. Appendix C: SCSI Commands (OP Code Order) 10- 1

11. Appendix D: ASC & ASCQ for AIT (Sony Unique) 11- 1

12. Appendix E: Introduction to AIT-2 contact type MIC

12.1. MIC Data Structures 12- 1

12.1.1. MIC Header 12- 1

12.1.2. System Log 12- 1

12.1.3. User Volume Note & User Partition Note 12- 2

12.1.4. Super High Speed Search Map 12- 2

12.1.5. Example of Usage 12- 2

12.2. Functional Benefits 12- 3

12.2.1. Fast Media Load / Unload 12- 3

12.2.2. Super High Speed Search 12- 4

12.2.3. Data Integrity / Media Management 12- 5

12.2.3.1. SampleApplication for MIC 12- 5

13. Appendix F: Miscellaneous Notes to AIT-2 contact type MIC

13.1. Partition Numbering in the DDS Emulation Mode 13- 1

13.2. AIT Log Sense 13- 1

13.3. Write Protection Tab on SDX2 cassette 13- 1

13.4. Unique Serial Number in MIC 13- 1

13.5. AIT Cassette Manufacturer ID in MIC 13- 1

13.6. AIT Cassette Secondary ID in MIC 13- 2

13.7. Unreadable MIC 13- 2

13.8. Example SCSI Command Sequence for MIC 13- 2

13.8.1. How to create User Notes inAIT-2 MIC 13- 2

SDX-450V series Ver.1.0 Table of Contents

13.8.1.1. Procedure for Writing User Data on MIC using LOG SELECT

Command 13- 4

13.8.2. User Data Length: 380 byte 13- 5

13.8.2.1. Procedure of Reading User Data on MIC using LOG SENSE

Command 13- 5

13.8.3. How to Update the User Volume Note 13- 6

13.8.4. How to Update the User Partition Note 13- 7

13.8.5. How to Expand or Shrink the User Volume Note 13- 8

13.8.6. How to Expand or Shrink the User Partition Note 13- 8

13.8.7. User Notes Hints 13- 8

14. Appendix G: MIC

(SCSI Interface Specification for AIT Multiple Partitioning)

14.1. MIC Features 14- 1

14.2. The Default Mode for Drive 14- 1

14.3. Cassette has a Mode 14- 1

14.4. Re-Using Cassettes 14- 1

14.5. LOADING / UNLOADING 14- 2

14.6. Application Notes 14- 3

14.6.1. Backup Techniques with MIC Cassettes 14- 3

14.6.2. How to changeActive Partition 14- 3

14.6.3. Retention 14- 3

15. Appendix H: AIT based WORM system

15.1. Important Notice 15- 1

15.2. Write-Protected (WP) Bit in Mode Sense Data 15- 1

15.3. How to detect a WORM cartridge (AIT2 WORM Media:

SDX2-50W) 15- 1

15.4. How to initialize a WORM cartridge 15- 1

15.5. How to handle the WORM cartridge in the drive 15- 3

16. Appendix I: Disaster Recover

16.1. Overview 16- 1

16.2. Creating Disaster Recovery Tape 16- 1

16.3. Configuring the Drive for Disaster Recovery Operation 16- 1

16.4. Exiting DR Mode 16- 1

16.5. Supported CDROM DR Command Set 16- 1

16.5.1. Inquiry (12h) 16- 1

16.5.2. Read 10 (28h) 16- 1

16.5.3. Read Capacity (0x25) 16- 1

16.5.4. Read TOC (0x43) 16- 2

16.5.5. Mode Sense/Select Page Code 0x3C 16- 2

16.6. Reset Handling 16- 2

17. Appendix J: Glossary 17- 1

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Freecom Azionamento CC

Freecom

Freecom USB DAT S-KIT Manuale utente

Manuali Azionamento CC popolari di altre marche

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manuale utente

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manuale elenco delle parti

Chamberlain Garog

Chamberlain Garog D Series Manuale utente

Parker

Parker PDS Series Manuale utente

Festo

Festo DGC G Series Guida all'installazione

Binks

Binks QS-5012-1-CE Manuale utente

Danfoss

Danfoss VLT 2800 Series Scheda tecnica

ABB

ABB ACQ580-01 Series Manuale di installazione

YASKAWA

YASKAWA CANopen SI-S3 Manuale utente

GE D20A6 Manuale utente

Unex

Unex MC-D-250-1000-050W-TW Manuale utente

Geckodrive

Geckodrive G213V Manuale utente

ABB

ABB RSYC-01 Manuale utente

Rockwell Automation

Rockwell Automation PowerFlex 700S Manuale del proprietario

WEG

WEG DeviceNet CFW500 Manuale utente

Siemens

Siemens SINAMICS G Scheda tecnica

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Istruzioni operative

SOMFY

SOMFY JR RU 30 Manuale utente