Freelap Relay Coach BLE Manuale utente
Relay Coach BLE
Your Relay Coach BLE has a 3.7V 5Ah LiPo rechargeable battery.
•Low battery indicator: When the battery becomes low, the PWR/CHR led flashes red.
•Recharge the battery:
- Insert the USB cable into the USB port of your Relay Coach BLE. Then connect it to the
power cable (supplied with adapter).
- It is recommended to make complete charges (charging time: 10h).
- When the battery is fully charged, the device has a battery life of 80h.
- The PWR/CHR led flashes green to indicate that the battery is full.
- By default, your Relay Coach BLE automatically turns off after 1 hour of inactivity, in
order to save the battery.
• Weight: 270 g
• Dimensions: 155 x 95 x 35 mm
• Compatibility: FxChip, LED Display
• Technology: Bluetooth (BLE)
• Memory: 6000 LAPs
• Battery: 3.7V 5Ah LiPo
• Battery life: 80 hours
• Water resistance: IP67
• Operating temperatures: -20°C to +50°C
Find our FAQ (Frequently Asked Questions), as well as other manuals and user guides,
on our website at: www.freelap.com/support
If you cannot find the answers to your questions, please contact your Freelap dealer.
Find the list of Freelap dealers at: www.freelap.com/freelap-contact
The Relay Coach BLE is guaranteed 2 years. If you have any questions or if you need
assistance with your device, please contact your Freelap dealer.
Further information
Battery and battery life
Technical sheet
Technical support
After-sales service & warranty
V250823
FREELAP SA
Av. D.-Jeanrichard 2A CH-2114 Fleurier – Switzerland
+41 32 861 52 42 - www.freelap.com
@freelap
RELAY COACH
DATA
STATUS
PWR/CHR
EXT PWR
About the Relay Coach BLE
Use of the Relay Coach BLE
Your Relay Coach BLE is the Freelap device which makes the link
between your FxChip transponder and your mobile device. The
Relay Coach BLE automatically receives the timing data collected
by your transponder when the athlete passes the FINISH
transmitter and instantly sends it via Bluetooth to your mobile
device.
1. Prerequisites
The Relay Coach BLE is a part of the Freelap timing system. To
get your timing data, you must attach the transponder to the
athlete, turn on and place the transmitters on the track, and use
the MyFreelap app (cf corresponding user manuals). • Attach the Relay Coach BLE case to its tripod or to its clip for
post (at a height of 1 meter).
• Place it after the FINISH transmitter, at a distance of max 10m.
• Press 2 seconds on the Power button to turn it on.
3. Place the Relay Coach BLE
4. Turn on the Relay Coach BLE
To get information about your Relay Coach BLE and to set your
settings preferences, you must download and use “Freelap
Device Manager” app.
You will be able to:
- Change the name of the device
- Check firmware and Bluetooth versions
- Update the device when a new update is available
- Download the data stored into your Relay Coach BLE (.csv file)
- Set the trigger time of the automatic shutdown function
More info about FDM app at:
www.freelap.com/support/freelap-device-manager-user-guide
Placing the device to any other location or position may
result in inaccuracies or non-detection.
6. Information & Settings
Your Relay Coach BLE has a memory of 6’000 Laps. If you have
not used the MyFreelap app on site, you will be able to download
the data collected during the training later (so up to 6’000 Laps).
5. Memory
2. Get to know your device
DATA Led: confirms the reception of the data
RELAY COACH
DATA
STATUS
PWR/CHR
EXT PWR
STATUS Led: confirms that the system is
operational
PWR/CHR Led: indicates the battery level
Power button: turns on / off the device
White point: Reset button. Press it for 2s to
restart if it is blocked.
EXT PWR port: To connect an external power source
USB port: To charge or to connect it to a computer
Altri manuali Freelap Staffetta
