Freescale Semiconductor MPC8309 Manuale utente
Freescale Semiconductor
Hardware KIT Quick Start Guide
© Freescale Semiconductor, Inc., 2011. All rights reserved.
1 Introduction
The MPC8309KIT helps user in quickly getting familiar
with external connection and making the MPC8309KIT
setup. It has a two-board system: one processor board, also
called SOM, featuring the PowerQUICC processor,
MPC8309, and memory interfaces and the other a carrier
card that consists of external world interfaces terminated on
connector/header.
Document Number: MPC8309-KITQS
Rev. 0, 06/2011
Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. MPC8309 SOM—Major Connectors’ Details . . . . . . 2
3. External Cable Connection for SOM Stand-alone . . . 3
4. Major Connectors of the Carrier Card . . . . . . . . . . . . 5
5. External Cable Connection for MPC8309KIT . . . . . . 5
6. PCI Card Insertion . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7. Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
MPC8309 Kit Quick Start Guide
MPC8309 Kit Quick Start Guide, Rev. 0
2Freescale Semiconductor
MPC8309 SOM—Major Connectors’ Details
2 MPC8309 SOM—Major Connectors’ Details
The following two figures show the major connectors of the MPC8309 SOM card.
Figure 1. Major Connectors and Switch on TOP Side of the MPC8309 SOM Card
Figure 2. Major Connectors and Switch on Bottom Side of the MPC8309 SOM Card
MPC8309 Kit Quick Start Guide, Rev. 0
Freescale Semiconductor 3
External Cable Connection for SOM Stand-alone
This figure shows the Jumper settings on Header J3 for either NOR boot mode or NAND boot mode.
Figure 3. NOR & NAND Boot Mode Jumper Settings
This figure shows the mounting options for configuring KA2 into RUN mode and PROGRAM mode.
Figure 4. Run and Program Mode Mounting Options
DPR
This three-pad components’ footprint provide options to mount/short link jumper on two adjacent pads.
You can select one of the two options by connecting two pads. Ensure that both the DPRs are configured
for the same option.
Before powering on the board, note the following:
• The on-board KA2 microcontroller is already flashed with the microcontroller reset program; thus,
the microcontroller programming switch (if reworked on board) must be in “off” position (that is,
the notch of the connector must not be towards “DOT”).
3 External Cable Connection for SOM Stand-alone
Make the following external cable connection to start using the SOM card in stand-alone mode:
• 5 V DC power adapter
• CAT5 cable for the network connectivity
• UART connection for the debug console with the PC
MPC8309 Kit Quick Start Guide, Rev. 0
4Freescale Semiconductor
External Cable Connection for SOM Stand-alone
This figure shows the external cable connectivity with MPC8309 SOM card.
Figure 5. External Cable Connection for SOM Stand-alone
NOTE
All necessary cables required are sent along with the MPC8309KIT.
Note that there is no need to connect external 5 V power supply and UART cable when the SOM card is
being used with the carrier card. Refer to Section 3, “External Cable Connection for SOM Stand-alone,”
for the external cable connection for MPC8309KIT.
MPC8309 Kit Quick Start Guide, Rev. 0
Freescale Semiconductor 5
Major Connectors of the Carrier Card
4 Major Connectors of the Carrier Card
This figure shows the major connectors on carrier card applicable for MPC830x SOM.
Figure 6. Major Connectors of Carrier Card for MPC830x SOM
Note the following before powering on the board:
1. Plug MPC8309 SOM on carrier card
2. Connect 12 V power adaptor to power jack
NOTE
DC-5Vinpoweradaptor should be disconnected from SOM before plugging
SOM on carrier card.
5 External Cable Connection for MPC8309KIT
Make the following external cable connections to start using the MPC8309KIT:
• 12 V DC power adapter
• Ethernet cable on Carrier/SOM card for Ethernet connectivity
• UART connection for the debug console with the PC
• USB device can be connected to mentioned connector (optional)
• RJ-11 and T1/E1 connectivity to be given through mentioned connector (optional)
MPC8309 Kit Quick Start Guide, Rev. 0
6Freescale Semiconductor
External Cable Connection for MPC8309KIT
This figure shows the external cable connectivity with MPC8309KIT (SOM + Carrier) card.
Figure 7. External Connection for MPC8309KIT Card
NOTE
Ethernet connection on either SOM or carrier is enough for MPC8309
connectivity to external world.
Ethernet connection on SOM is done through FEC1 and on carrier through FEC2 and FEC3 of MPC8309.
Other ports of switch downlink can be used for connecting more than one system/Network to MPC8309
SOM.
Insert SOM card properly on carrier card. Improper insertion of SOM card can result in Ethernet
connectivity issue on FEC2 and FEC3. USB device, T1/E1 connection, RJ11 and Ethernet cable
connection to carrier card is optional. These external connections can be done on need basis.
MPC8309 Kit Quick Start Guide, Rev. 0
Freescale Semiconductor 7
PCI Card Insertion
6 PCI Card Insertion
MPC8309KIT supports PCI interface. PCI interface on SOM is terminated in miniPCI and PCI connector.
3.3 V PCI card is only supported on carrier card. Plug PCI card, as shown in the following figure.
Figure 8. External Connection for PCI Add-on Card for Carrier Card
NOTE
Insert PCI card so that PCI card notch comes towards RJ-45/DB9 connector
as shown in figure.
CAUTION
Wrong insertion of PCI card may damage the PCI card and/or MPC8309KIT.
7 Revision History
\Table 1. Document Revision History
Revision Number Date Substantive Change(s)
0 06/11 Initial Public Release.
Document Number: MPC8309-KITQS
Rev. 0
06/2011
Information in this document is provided solely to enable system and software
implementers to use Freescale Semiconductor products. There are no express or
implied copyright licenses granted hereunder to design or fabricate any integrated
circuits or integrated circuits based on the information in this document.
Freescale Semiconductor reserves the right to make changes without further notice to
any products herein. Freescale Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does
Freescale Semiconductor assume any liability arising out of the application or use of
any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters which may be
provided in Freescale Semiconductor data sheets and/or specifications can and do
vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. Freescale Semiconductor does not convey any license
under its patent rights nor the rights of others. Freescale Semiconductor products are
not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life,
or for any other application in which the failure of the Freescale Semiconductor product
could create a situation where personal injury or death may occur. Should Buyer
purchase or use Freescale Semiconductor products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor
anditsofficers,employees, subsidiaries,affiliates,anddistributorsharmlessagainstall
claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Freescale
Semiconductor was negligent regarding the design or manufacture of the part.
How to Reach Us:
Home Page:
www.freescale.com
Web Support:
http://www.freescale.com/support
USA/Europe or Locations Not Listed:
Freescale Semiconductor, Inc.
Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284
1-800-521-6274 or
+1-480-768-2130
www.freescale.com/support
Europe, Middle East, and Africa:
Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
www.freescale.com/support
Japan:
Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1-8-1, Shimo-Meguro, Meguro-ku
Tokyo 153-0064
Japan
0120 191014 or
+81 3 5437 9125
suppor[email protected]
Asia/Pacific:
Freescale Semiconductor China Ltd.
Exchange Building 23F
No. 118 Jianguo Road
Chaoyang District
Beijing 100022
China
+86 10 5879 8000
suppor[email protected]
For Literature Requests Only:
Freescale Semiconductor
Literature Distribution Center
1-800 441-2447 or
+1-303-675-2140
Fax: +1-303-675-2150
LDCForFreescaleSemiconductor
@hibbertgroup.com
Freescale and the Freescale logo are trademarks or registered trademarks
of Freescale Semiconductor, Inc. in the U.S. and other countries. All other
product or service names are the property of their respective owners. The
Power Architecture and Power.org word marks and the Power and
Power.org logos and related marks are trademarks and service marks
licensed by Power.org.
© Freescale Semiconductor, Inc., 2011. All rights reserved.
Indice
Altri manuali Freescale Semiconductor Hardware per computer
Freescale Semiconductor
Freescale Semiconductor MSC8144ADS Manuale utente
Freescale Semiconductor
Freescale Semiconductor FRDM-STBC-SA9500 Guida di riferimento
Freescale Semiconductor
Freescale Semiconductor USB-KW24D512 Manuale utente
Freescale Semiconductor
Freescale Semiconductor MPC5604P Manuale utente
Freescale Semiconductor
Freescale Semiconductor i.MX 6Solo Manuale utente
Freescale Semiconductor
Freescale Semiconductor EVB9S12NE64 Manuale utente
Freescale Semiconductor
Freescale Semiconductor PowerQUICC III MPC8555E Manuale di istruzioni
Freescale Semiconductor
Freescale Semiconductor MC9S08PT60 Manuale utente
Freescale Semiconductor
Freescale Semiconductor M68HC08 series Manuale utente
Freescale Semiconductor
Freescale Semiconductor EVBCRTOUCH Manuale utente
Freescale Semiconductor
Freescale Semiconductor Windows Embedded CE 6.0/Windows CE 5.0 i.MX31 PDK... Manuale utente
Freescale Semiconductor
Freescale Semiconductor MPC850 Manuale utente
Freescale Semiconductor
Freescale Semiconductor MPC8349EA PowerQUICC II Pro Manuale utente
Freescale Semiconductor
Freescale Semiconductor MCF5480 Manuale utente
Freescale Semiconductor
Freescale Semiconductor i.MX 6SoloLite Linux Manuale utente
Freescale Semiconductor
Freescale Semiconductor FRDM-KL25Z Manuale utente
Freescale Semiconductor
Freescale Semiconductor i.MX53 SABRE Manuale utente
Freescale Semiconductor
Freescale Semiconductor MPC5200B Manuale utente
Freescale Semiconductor
Freescale Semiconductor i.MX35 Manuale utente
Freescale Semiconductor
Freescale Semiconductor MMA9559L Manuale utente
Freescale Semiconductor
Freescale Semiconductor MPC8349E PowerQUICC II Pro Manuale utente
Freescale Semiconductor
Freescale Semiconductor MC68HC08KH12 Manuale utente
Freescale Semiconductor
Freescale Semiconductor MED-EKG Manuale utente
Freescale Semiconductor
Freescale Semiconductor FRDM-K64F Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
