Frequenz 400-100 Manuale utente
Instruction Manual
Frequenz400-100 / Frequenz400-140
REV：01
Contents
1. General Safety Information...........................................................................................3
2. Product Description ......................................................................................................4
3. Technical Data ...............................................................................................................4
4. Drawing of appearance and dimension ......................................................................5
5. Warnings –Symbols .....................................................................................................6
6. Safety information of operation...................................................................................6
7. Safety information for installation...............................................................................7
8. Proper Use......................................................................................................................8
9. Scope of delivery...........................................................................................................8
10. Components introduction ........................................................................................9
11. Layout of control unit................................................................................................10
12. Installation..................................................................................................................11
13. Wiring..........................................................................................................................14
14. Operator Programming.............................................................................................19
14.1 Main Menu ................................................................................................................19
14.2 Set Password...........................................................................................................20
14.3 Load Settings...........................................................................................................21
14.4 Door Positions.........................................................................................................22
14.5 Safety Devices .........................................................................................................25
14.6 Operation Mode .......................................................................................................27
14.7 Inputs / Outputs.......................................................................................................28
14.8 Automatic Closing...................................................................................................30
14.9 Service......................................................................................................................31
14.10 Expert Settings ......................................................................................................32
14.11 Motor Settings........................................................................................................33
15. Error Code Table........................................................................................................34
16. EC Declaration of Incorporation ..............................................................................36
- 3 -
1. General Safety Information
⚫The door operator may only be used under the conditions described in these
instructions. Any other use will be considered improper usage and therefore
dangerous. The manufacturer is not liable for damage resulting from improper,
incorrect or inappropriate usage.
⚫Failure to observe the information contained in these instructions may lead to personal
or material damage. The instructions must be passed on to all future users and
operators of the door operator.
⚫Only use the door operator if no maintenance or adjustment measures are required to
do so. Disconnect the operator from the power supply for cleaning or maintenance.
⚫Only use the door operator if the entire area of movement is fully visible. During
operation, be aware of other people who may be within the operating range of the
product or who may enter this area. Do not drive or walk underneath the door while it
is moving.
⚫Do not use the door operator to lift up objects and/or people.
⚫Ensure that children are kept away from the area around the door.
⚫Children over the age of 8 and persons with reduced physical, sensory or mental
capabilities may operate the door operator when supervised or if they have been
instructed in the safe handling of the equipmentand are aware of the associated risks.
⚫Keep remote controls and/or other controls out of reach of children to prevent the
accidental activation of the door operator.
⚫Cleaning work on the door operator or the door or any maintenance measures may
only be performed by children when supervised.
Dispose the operator according to your local environmental regulations.
Electrical parts must not be disposed as domestic waste !
- 4 -
2. Product Description
The door operator has been developed for industrial doors.
The door operator can be equipped with the following additional safety devices, such as:
-Photocells，Light curtains，Safety edges
-Radar
-Loop detector
-Remote control，Push buttons，Pull switches
-Traffic light
The door operator is operated via the control unit.
You can choose different operating settings for the operator (e.g. automatic, semi-
automatic or hold to run).
3. Technical Data
Model
Frequenz 400-100
Frequenz 400-140
Rated Voltage/Frequency
400V 3-phase/ 50Hz
400V 3-phase / 50Hz
Rated input power in KW
0.8
1.1
Torque in Nm
100
140
Speed in RPM
30
30
Frequency converter
NA
Diameter hollow shaft in mm
25.44mm
25.44/31.75mm
Max cycles per hour
35c/h
Emergency release
Chain hoist
Limit setting of door travel
Digital encoder
- 5 -
4. Drawing of appearance and dimension
Hyper lift-model
Frequenz 400-100
Frequenz 400-140
Door operator L*W*H(mm)
431*180*280
488*180*280
Control box L*W*H(mm)
420*122*162
420*122*162
Packing L*W*H(mm)
573*510*200
573*510*200
Door operator
Control box
- 6 -
5. Warnings –Symbols
Note: Technical information must be observed
Fig. 1 Number of a figure
Caution: Warns of a risk to a person / risk of injury
Warning: Warns of a risk to material / risk of damage
6. Safety information of operation
The door may only operated if:
⚫Conformity in accordance with Machinery Directive 2006/42/EC was declared
following assembly.
⚫The door complies with the standards EN 12605, EN 12604 and DIN EN 13241-1.
⚫The door operator has been assembled in accordance with EN 12453, EN 12445 and
EN 12635.
⚫Any additionally installed safety equipment is functioning properly.
⚫There is an internally operated emergency release for garages that have no second
access.
⚫Any pass door set within the door is equipped with a safety device that prevents
switch-on while the door is open.
⚫The emergency release cannot be caught on any vehicle parts (e.g. roof structures).
⚫It is insured that the installation is conform with the national safety regulations.
Keep the instruction manual at a safe place!
- 7 -
7. Safety information for installation
Important:
The door must move easily and be functional and well-balanced in accordance with the
manufacturer's specifications.
It must be possible to open and close the door by hand easily.
Assembly must be carried out by trained and specialized personnel.
Electrical installation work must only be performed by authorized and specialized
personnel.
The suitability and bearing capacity of the supporting structure of the building in which the
door operator is to be installed must be checked and confirmed by expert personnel.
The door operator must be securely fastened at all the mounting points provided. The
mounting material must be chosen according to the material characteristics of the
supporting structure to ensure that a minimum tensile force of 900 N can be withstood.
If these requirements are not fulfilled, the door operator may fall down or the door may
move without control. This means there is a risk of personal injury or material damage.
When mounting the door operator, it must be secured by appropriate means against falling
until it is completely and safely attached.
Observe the relevant occupational health and safety regulations during the installation.
- 8 -
8. Proper Use
This door operator is suitable for use with balanced sectional doors and sectional
doors equipped with spring-break protection and/or safety catch.
The maximum dimensions given in the technical data must be complied with.
Before installing the door operator, any existing locking mechanisms for the door must be
disassembled or taken out of operation.
Use in an explosion-proof environment is not permitted.
Any other use above and beyond this is considered as improper use.
All of the below activities performed without the express written approval of the
manufacturer:
⚫Expansions or modifications
⚫Use of non-original replacement parts
⚫Performance of repairs by persons or operators that have not been authorized by the
manufacturer may result in the loss of the warranty.
No liability can be accepted for damages that result from the following causes:
⚫Technical defects on the door to be operated and structural deformations occurring
during operation
⚫Improper maintenance of the door
⚫Failure to observe the operating instructions
9. Scope of delivery
1
Door operator with emergency release (chain)
2
Control unit with main switch
3
Torque bracket
4
Assembly fasteners
5
External power cable with plug
6.
Signal cable
7.
Internal power cable
- 9 -
10. Components introduction
1
Motor
2
Emergency release (Chain)
3.
Gear box
4.
Emergency release deactivate cord
5
Emergency release activate cord
6
LCD display
7
“UP” button
8
“STOP” button
9
“DOWN” button
10
Main switch
11
Power plug
1
2
4
5
3
6
7
8
9
10
11
Altri manuali per 400-100
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Manuali Paranco a catena popolari di altre marche
EINHELL
EINHELL Herkules H-F 1000 Manuale utente
RED ROOSTER
RED ROOSTER TCR-250 Manuale utente
POWERTEX
POWERTEX PCB-S1 Manuale utente
Parkside
Parkside PSZ 250 A1 Manuale utente
Ingersoll-Rand
Ingersoll-Rand QCH Series Manuale utente
Creative Conners
Creative Conners CM Varistar Smart Chain Hoist Manuale utente
