Service & maintenance
3.0 Maintenance
The interval of cleaning depends on the indoor environment where the panel is placed.
Under optimal conditions the Aquaztrip P panels only need cleaning every 5 years.
3.1 Cleaning instructions
–Only use lukewarm water and a mild detergent. Use a vacuum cleaner with a soft
brush to remove any dust from the panel’s surface.
4.0 Product and system specification
4.1 Material data
P 40 P 60 P 90 P 120
Dry weight, kg/m 2,1 3,0 5,4 7, 5
Water content, l/m 0,4 0,8 1,2 1,6
Copper pipes, quality EN12735-2 CU-DHP
Linear exp. Panel overtemp. 0,024 mm/(m * °K
4.2 Environmental declaration
–Please visit www.frico.net
4.3 Working and test pressure
Pressure test and operation
Approval directive 97/23/EG
Pressure class PN10
Max. working pressure 10 bar
Max. test pressure with water 16 bar
Max. test pressure with air 10 bar
Recommended dynamic drive pressure <25 kPa
(*) The water circuit in the panel can withstand a drive pressure of up to 10 Bar, but
we recommend a maximum drive pressure that applies to the current control valve to
avoid noise from valves.
8
Aquaztrip H, L, P
