Fridgmaster MUL49102 Istruzioni operative

How to use your new

Larder fridge

Model MUL49102

Safety and warning information

Before you switch ON the appliance

Please read the operating and installation instructions carefully. They

contain important information on how to install, use and maintain

the appliance. Keep all documentation for subsequent use or for the

next owner.

Technical safety

This appliance contains a small quantity of environmentally friendly but

flammable R600a refrigerant. Ensure that the tubing of the refrigeration

circuit is not damaged during transportation and installation. Leaking

refrigerant may ignite.

If damage has occurred

- Keep naked flames and/or ignition sources away from the appliance.

- Pull out the mains plug.

- Thoroughly ventilate the room for several minutes.

- Notify customer services.

The more refrigerant an appliance contains, the larger the room must be.

Leaking refrigerant can form a flammable gas-air mixture in rooms which

are too small. The room must be at least 1m3per 8 g of refrigerant.

The amount of refrigerant in your appliance is indicated on the rating label

on your appliance.

Important information when using the appliance

â This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or experience or

knowledge, unless they have been given supervision or instructions

concerning the use of the appliance by a person responsible for their

safety. Children should be supervised to ensure that they do not play

with the appliance.

â If the supply cord is damaged, it must be replacedby the manufacturer,

its service agent or similarly qualified persons in order to avoid a hazard.

â Never use electrical appliances inside the refrigerator (e.g. heater,

electric ice maker, etc.). Explosion hazard!

â Neveruse a steam cleaner to clean the appliance. The steam may pen-

etrate electrical parts and cause a short circuit. Risk of electric shock!

â Do not store products which contain flammable propellants(e.g. spray

cans) or explosive substances in the appliances. Explosion hazard!

âDo not stand or support yourself on the base, drawers or doors, etc.

â Before defrosting and cleaning the appliance, pull out the mains plug or

switch off the fuse. Do not pull out the mains plug by tugging the cable.

â Commerciallyfrozen pre-packed food should be stored in accordance

with the frozen food manufacturers instruction.

â Bottles containing a high percentageof alcohol must be sealed and

stored in an upright position.

â Keepplastic parts and the door seal free of oil and grease. Otherwise,

the plastic and door seal will become porous.

âNever cover or block the ventilation openingsfor the appliance.

â Do not store bottled or canned drinks (especiallycarbonated drinks)

in the ice compartment. Bottles and cans may explode!

â Never put frozen food, or ice cubes, straight from the ice compartment

into your mouth. Risk of frost burns to the lips and tongue!

â Avoid prolonged touching of frozen food, ice or the inner freezer walls

or tubing etc. Risk of frost burns to the skin.

â Do not scrape off frost or stuck frozen food with a knife or pointed

object. You could damage the refrigerant tubing. Leaking refrigerant

may ignite. Only use a plastic scraper.

â In the case of malfunction, under no circumstancesshould you attempt

to repair the appliance yourself. Repairs carried out by inexperienced

persons may cause injury or further malfunctioning to the appliance.

â When the appliance is unplugged please wait for 5 minutes before

plugging it in again. Otherwise, the compressor will be overloaded.

â Do not use electrical appliances such as a hairdryer or heaters

near your refrigerator.

âDo not store inflammable gases or liquids inside your refrigerator.

Children in the household

â Keepchildren away from the packaging and its parts. Danger of

suffocation from folding cardboard and plastic film!

â Do not allow children to tamper with the controls or play with the

appliance. It is not a toy. Under no circumstances should children

be allowed to sit on the bins or hang from the door.

â If the appliance features a lock, keep the key out of the reach

of children.

General requirements

â The appliance is designed for domestic use insidethe home and is not

intended for commercial or industrial use.

â The appliance must be used to store food products by adults only and

according to the instruction manual.

â Try to avoid keeping the door open for long periods or opening the

door too frequently in order to conserve energy.

â Do not fill the appliance with too much food: cold air must circulate

freely for food to be preserved properly.

SAFETY

GETTING TO KNOW YOUR LARDER FRIDGE INSTALLATION

Location

When selecting a position for your larder fridge you should make sure the floor is flat and firm and the room is

well ventilated with an average room temperature of between 16°C and 38°C. Avoid locating your larder fridge

near a heat source, eg. cooker, boiler or radiator. Also avoid direct sunlight. Never place the larder fridge in a wall

recess or into fitted cabinets or furniture. When your larder fridge is working, the grille at the back may become

hot and the sides warm. It must therefore be installed so that there is 7.5cm of free space at the sides and rear,

10cm above and clear space in front to allow the door to open 160°.

There is a built in airflow grille at the back of the larder fridge lid to ensure the correct distance

from the rear wall. The larder fridge door can either open to the right or the left, depending on the location which

suits you. See page 6 if you want reverse the door swing. Do not drape the larder fridge with any covering.

Levelling the larder fridge

Once the larder fridge is put in its final location, make sure it is level. To do this use

the two levelling feet at the front of the larder fridge. If the larder fridge is not level,

the doors and magnetic seal alignments will be affected.

Cleaning before use

Wipe the inside of the larder fridge with a weak solution of bicarbonate of soda, then rinse with warm water using

a wrung-out sponge or cloth. Wipe completely dry before replacing the shelves and baskets. You could clean the

larder fridge externally with wax polish. If you require more information refer to

CLEANING on page 8.

Before plugging in YOU MUST

Check that you have a socket which is compatible with the plug supplied with the larder fridge. If not,

see the section calledELECTRICAL CONNECTIONS on page 9.

Before switching on!

DO NOT SWITCH ON UNTIL TWO HOURS AFTER MOVING THE LARDER FRIDGE. The coolant fluid needs time to settle.

Before using your larder fridge

Before placing any food in your larder fridge, turn the larder fridge on and wait for 24 hours to make sure it is

working properly and to allow the larder fridge to fall to the correct temperature.

Before use

Please read these instructions carefully before using your new Fridgemaster

larder fridge. The larder fridge is for indoor and domestic use only.

Please keep these instructions in a safe place for future reference.

INTERNAL LIGHT

AND THERMOSTAT

SHELVES

BOTTLE STORAGE

LEVELLINGFEET

SALAD BIN

USING YOUR FRIDGE

Switching on your larder fridge

1Before connecting the larder fridge to the mains supply, make sure

that the thermostat control dial located inside the larder fridge

compartment next to the internal light, is set between 3 to 4 but

closer to 3, which is the correct setting for use in a room of

average temperature.

2Wait 24 hours before placing food in the cabinet to allow for the

larder fridge to fall to the correct temperature.

Adjusting the temperature

The internal temperature of your larder fridge is controlled by the

thermostat control dial. There are 8 settings. Position 8 makes the larder

fridge coldest. Position 1 makes it the warmest. To adjust the temperature

turn the thermostat control dial to the preferred setting. Position 0 will

turn the larder fridge off.

Is this larder fridge cold enough?

If you are concerned that your larder fridge is not being kept cold enough,

and wish to check the temperature, you will need a special fridge/freezer

thermometer available from most supermarkets and hardware shops.

Place the thermometer on the middle shelf of the larder fridge, where it

can be read easily. Leave overnight, the temperature in the larder fridge

should be between Ò& and Ò&

Noises inside the larder fridge!

If you have not owned a larder fridge before, you may notice that it

makes some rather unusual noises. Most of these are perfectly normal,

but you should be aware of them!

Gurgling, whooshing

These noises are caused by the circulation of the refrigerant liquid in the cooling

system. It has become more pronounced since the introduction of &F&free gases.

This is not a fault and will not affect the performance of your larder fridge.

Humming, purring or pulsating

This is the compressor motor working, as it pumps the refrigerant around

the system.

Tips for keeping food perfect in the

larder fridge

Take extra care with meat and fish

&RRNHG meats should always be stored on a shelf above raw meats to

avoid bacterial transfer. Keep raw meats on a plate which is large enough

to collect juices and cover it with cling film or foil.

Leave space around food

This will allow cold air to circulate around the larder fridge.

Wrap up food!

To prevent transfer of flavours and drying out, food should be separately

packed or covered. Fruit and vegetables need not be wrapped.

Let pre-cooked food cool properly

Always let pre-cooked food cool down before you put it in the larder

fridge. This will stop the internal temperature rising.

Shut the door!

To prevent cold air escaping, limit the number of times you open the door.

When returning from shopping, sort foods to be kept in your larder fridge

while the door is closed.

Where to store your foods in the larder fridge

&RRODrea

This is where to store foods which will keep longer if they are kept cool.

Milk, yogurt, fruit juices, hard cheeses eg, cheddar. Opened jars and

bottles of salad dressings, sauces and jams. Fats, eggs, butter, margarine,

low-fat spreads, cooking fats and lard. Eggs.

&ROGHVWDrHDr&WRr&

This is where foods which must be cold to keep them safe should be kept.

Raw and uncooked foods should always be wrapped.

â Pre-cooked chilled foods, eg. ready meals, meat pies, soft cheeses.

âPre-cooked meats eg. ham.

â Prepared salads (including pre-washed chopped, pre-packed mixed

green salads, rice, potato salad etc).

â Desserts,eg. fromage frais, home-prepared food and leftovers or

&ream cakes.

Salad bin

This is the most humid part of the larder fridge. Vegetables, fruit, fresh salad

items eg. unwashed whole lettuce, whole tomatoes, radishes etc.

WE 5(&OMMEND THAT ALL PR2'8&E KEPT IN THE SALAD BIN IS WRAPPED.

Note: Always wrap and store raw meat, poultry and fish on the lowest

shelf at the bottom of the refrigerator. This will stop them dripping onto,

or touching, other foods.

Do not store inflammable gases or liquids.

THERMOSTA7&21752/',$/

&22/

&2/'(67

SALAD BIN

REVERSING THE DOOR SWING

The door of your larder fridge can

be reversed.

â Ensurethe larder fridgeis unplugged

and empty.

âWe recommend someoneevahuoy

to assist you.

Tools required

âPhillips style screwdriver.

âFlat bladed screwdriver.

â8mm socket or spanner.

When trying to gain access to the base of

the larder fridge, do not tip it back at more

than a 45° angle. Rest the larder fridge on

soft foam packaging or similar material to

avoid damaging the back of the appliance

Remove the top hinge cover. Remove the two hinge bolts with

a 8mm spanner.

Remove the top hinge.

the bottom hinge.

Remove both feet. Remove the bottom hinge bol ts.

1 2 3

4 5 6

Fit the bottomhingeon the oppositeside.

84 5

511 12 1310

Replace both feet. .Fit thetop hingeandthe boltsusingthe

8mm spanner.

Remove the blanking piece.

blanking piece

10mm socket or spanner

Changing the internal light

1Before carrying out the bulb replacement,always switch off and

disconnect the electrical supply.

Use a small screwdriver to undo the screw securing the lamp cover.

3 To remove the lamp cover, grasp the extended tab between thumb and

forefinger and push gently toward the back of the cabinet.

Remove the old bulb by unscrewing in an anti-clockwise direction.

5 Replace with a new bulb (15w) by screwing it in a clockwise direction

making sure that it is secure in the bulb holder.

Replace the translucent light cover and re-secure with the screw

before re-connecting your larder fridge to the electrical supply and

switch on.

MAINTENANCE

The larder fridge is not working

Check it is plugged in and switched on. Check that the fuse in the plug

has not blown. Plug in another appliance, such as a lamp, to see if the

socket is working.

Condensation appears on the outside of the

larder fridge

This may be due to a change in the room temperature. Wipe off

any residue of moisture. If the problem continues call the customer

service department.

Noises

You may hear some unusual noises from time to time. See ‘Noises inside

the larder fridge’ on page 5.

If you are not able to identify and eliminate the faults according to

the above recommendations, contact the customer service department,

advising the model number of the appliance which is shown on the back

of the rating plate.

Do not attempt to repair your larder fridge yourself as it might endanger

you and others.

Moving your larder fridge

Location

Do not locate your larder fridge or near a heat source, eg. cooker, boiler

or radiator. Also avoid direct sunlight.

Levelling the larder fridge

Make sure the larder fridge is level. Use the rotating levelling feet at

the front. If the larder fridge is not level, the doors and magnetic seal

alignments will be affected.

Do not turn on the larder fridge for two hours

After the larder fridge is in place it needs to be left for two hours.

The coolant fluid needs time to settle.

Installation

Don’t cover or block the vents or grilles of your appliance.

Servicing

Repairs and maintenance of the appliance should only be performed

by an authorised, qualified technician.

TROUBLESHOOTING

THIS APPLIANCE MUST BE EARTHED.

3631SBotgulpnipeerhtdesufahtiwdettifsiecnailppasihT

otstekcoshtiwdettifsesuohllan

iesurofelbatiuseblliwhcihw

current specifications.

tucebdluohsti,steltuotekcosruoyrofelbatiustonsigulpdett

ifehtfI

off and carefully disposed of. To avoid a possible shock hazard, do not

insert the discarded plug into a socket.

Fitting a new plug

If for any reason you need to fit a new plug, the flexible mains lead must

be connected as shown here.

CONNECT GREEN

AND YELLOW TO EARTH (E)

(Note: some appliances do

not have earth wires.)

CONNECT BLUE TO

NEUTRAL (N)

MAKE SURE THE CABLE

IS HELD BY THE CLAMP

CONNECT BROWN

TO LIVE (L)

ELECTRICAL CONNECTIONS

nideruoloceraecnailppasihtotdettifdaelsniamehtniseriwehT

accordance with the following code:

If the colours of the wires in the mains lead of this appliance do not

correspond with the coloured markings identifying the terminals in your

plug, proceed as follows:

The wire which is coloured Green and Yellow MUST be connected to the

terminal which is marked with the letter E (Earth) or symbol or coloured

Green. The wire which is colour ed Blue MUST be connected to the

terminal which is marked with the letter N or coloured Black. The wire

which is coloured Brown MUST be connected to the terminal which is

marked with the letter L or coloured Red.

Before refitting the plug cover, check that there are no cut or stray strands

of wire inside the plug.

Use a 13 Amp BS1362 fuse, only BSI or ASTA approved fuses should be

used. If you are in any way unsure which plug or fuse to use, always refer

to a qualified electrician.

Note: After replacing or changing a fuse on a moulded plug which has

a fuse cover, the cover must be refitted to the plug, the appliance must

not be used without a fuse cover. If lost, replacement fuse covers can be

obtained from an electrical shop.

This appliance complies with the following EEC Directives: 73 / 23 EEC

(Low Voltage Directive) 89 / 336 EEC (EMC Directive).

NOTES

Indice

Altri manuali Fridgmaster Frigorifero

Fridgmaster

Fridgmaster MTRL109A Istruzioni operative

Manuali Frigorifero popolari di altre marche

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Manuale utente

Sharp

Sharp SJ-BA31IEXW2-EU Manuale utente

CORBERO

CORBERO CC2300MCW Manuale utente

KitchenAid

KitchenAid 2205264 Manuale utente

Stengel

Stengel KU 1101 A++ Manuale utente

NEFF

NEFF KI181 Series Manuale utente

Hoshizaki

Hoshizaki Reach-In Manuale utente

Amana

Amana ASD2524VES00 Manuale utente

BOMANN

BOMANN KGC 213 Manuale utente

Danby

Danby DAR044A1SLDD Istruzioni per il montaggio

Samsung

Samsung RF323TE Manuale utente

Beko

Beko CSA31022 Manuale utente

IKEA

IKEA FROSTIG C 185 E Manuale utente

Electrolux

Electrolux ER 6821 D Manuale utente

True

True TS-28 Manuale utente

Frigidaire

Frigidaire FSC23R5DW9 Manuale utente

Beko

Beko LSP4579W Manuale utente