FS S5500-48T8SP Manuale utente
Managed Network & Data Center
1、Description
Please use two cables or modules + jumper to stack devices.The device stack is called
BVSS.
2、Precautions
Please use the 10G port to stack
3、BVSS Configuration
Network Topology
Configuration Steps
1. Connect the device
# Connect the PC and the switch to the network cable and the console port. Connect one end of the RJ-45 network
cable to the network card interface of the PC and the other end to the network port of the SW. Connect one end of
the console cable USB to the USB port of the PC. One end of the RJ-45 is connected to the console port on the
front panel of the switch.
2. Download the configuration software
# After the connection is complete, here we recommend HyperTerminal, putty or SecureCRT tools to configure the
switch.
3. Open the switch and use the login software
# Power on the switch, then open the installed login software, select the serial login mode, Port is determined by
the device manager, Baud rate: 115200, Data bits: 8, Parity: None, Stop bits: 1.
Note：
You can view the COM Number via Device Manager (right-click My Computer > Administration > Device
Manager > Ports (COM and LPT). If an unrecognized USB device is displayed, download and install the
corresponding driver.
4. Log in to the switch
# After completing the above steps, hitting the Enter key of the keyboard will prompt you to enter the account
password. At this time, enter the default username and password admin/admin to log in to the switch.
5. Switch configuration
First device configuration：
Switch>enable
Switch#config
Switch_config#bvss
Switch_config_bvss#bvss enable
Switch_config_bvss#bvss domain-id 1
Switch_config_bvss#bvss member-id 1
Switch_config_bvss#bvss priority 100
Switch_config_bvss#bvss mode normal
Switch_config_bvss#bvss interface 1 type TGigaEthernet port 1 group 1
Switch_config_bvss#bvss interface 2 type TGigaEthernet port 2 group 1
Switch_config_bvss#quit
Switch#write bvss-config
Switch#reboot
Second device configuration：
Switch>enable
Switch#config
Switch_config#bvss
Switch_config_bvss#bvss enable
Switch_config_bvss#bvss domain-id 1
Switch_config_bvss#bvss member-id 2
Switch_config_bvss#bvss priority 10
Switch_config_bvss#bvss mode normal
Switch_config_bvss#bvss interface 1 type TGigaEthernet port 1 group 2
Switch_config_bvss#bvss interface 2 type TGigaEthernet port 2 group 2
Switch_config_bvss#quit
Switch#write bvss-config
Switch#reboot
PS:This is the configuration command for two wires to be stacked.
3、After the customer completes the BVSS configuration, you can use the
command: show interface brife ，to verify whether the stack is successful.
Altri manuali per S5500-48T8SP
4
Indice
Altri manuali FS Interruttore
FS
FS S3150-8T2FP Manuale utente
FS
FS S1900-8T Manuale utente
FS
FS S5850-24S2Q Manuale utente
FS
FS S3150-8T2FP Manuale utente
FS
FS S3900 Series Manuale utente
FS
FS S5860-24XB-U Manuale utente
FS
FS S3700-24T4F Manuale di istruzioni
FS
FS S3150-8T2FP Manuale utente
FS
FS S3260-8T2FP Manuale utente
FS
FS S3150-8T2FP Manuale utente
FS
FS S3900 Series Manuale utente
FS
FS S5800-48F4SR-DC Manuale utente
FS
FS S3910 Series Manuale utente
FS
FS S5860-48SC Manuale operativo
FS
FS N5860 Series Manuale utente
FS
FS S3700-24T4F Manuale di istruzioni
FS
FS S2805S Series Manuale utente
FS
FS S5800-48F4S Manuale utente
FS
FS S3700-24T4F Manuale di istruzioni
FS
FS S1900-5T Manuale utente
