FS S5850-24XMG Manuale utente

V1.0

Quick Start Guide

Quick-Start Anleitung

Guide de Démarrage Rapide

S5850-24XMG

MANAGED L3 ENTERPRISE SWITCH

Managed L3 Enterprise Switch

SWITCH MANAGEABLE L3 POUR ENTREPRISE

SYS ID MGMT

CON

MGMT

S5850-24XMG

65 87

13 16

21 24

123

100G

4Breakout

Introduction

Thank you for choosing S5850-24XMG switch. This guide is designed to familiarize you with the layout

of the switch and describes how to deploy the switch in your network.

S5850-24XMG

SYS ID MGMT

CON

MGMT

S5850-24XMG

65 87

13 16

21 24

123

26 100G

4Breakout

Accessories

Grounding Cable x1

Console Cable x1

M4 Screw x12Front Mounting Bracket x2

Power Cord x2

Back Mounting Bracket x2

Sliding Rail x2

Hardware Overview

Front Panel Ports

Ports Description

CON

MGMT

USB

RJ45

An RJ45 console port for serial management

An Ethernet management port

A USB port for software and conguration backup and

oine software upgrade

10/100/1000/2.5G/5G/10GBASE-T ports for Ethernet connection

QSFP28 QSFP28 ports for 40/100G transceivers

RJ45

SYS ID MGMT

CON

MGMT

S5850-24XMG

65 87

13 16

21 24

123

26 100G

4Breakout

CON

MGMT

USB

QSFP28

Front Panel LEDs

SYS ID MGMT

CON

MGMT

S5850-24XMG

65 87

13 16

21 24

123

26 100G

4Breakout

SYS

MGMT

RJ45

QSFP28

O

Blue

Amber

O

Green

LEDs State Description

ID indication function enable.

SYS

MGMT

ID indication function disable.

System is running normally.

System occurs alarm or error.

No power or no system runs or runs abnormally.

Port is receiving or transmitting packets.

Port is linked.

Green

Blinking Green

O Port is not linked.

Blinking(L)

On(L)

Amber(R)

Green(R)

Green

LEDs State Description

Port is linked.

RJ45

QSFP28

Port is receiving or transmitting packets.

Port is not linked.

The rate hasn’t reached the maximum.

The rate has reached the maximum.

O(R) Port is not linked.

Packets are receiving or transmitting at 40/100G.

Port is linked at 40/100G.

O(L)

Blinking Green

Amber

Blinking Amber

O

Port is linked at 10/25G.

Packets are receiving or transmitting at 10/25G.

Port is not linked.

Back Panel

4 Hot-swappable Fans 2 Hot-swappable Power Supplies

Grounding Point

Installation Requirements

Phillips screwdriver.

Before you begin the installation, make sure that you have the followings:

Standard-sized, 19" wide rack with a minimum of 1U height available.

Category 5e or higher RJ-45 Ethernet cables for connecting network devices.

Site Environment

Do not install the equipment in a dusty environment.

The installation site must be free from leaking or dripping water, heavy dew, and humidity.

Do not operate it in an area that exceeds an ambient temperature of 45°C.

The installation site must be well ventilated. Ensure that there is adequate air ow around the

switch.

Be sure that the switch is level and stable to avoid any hazardous conditions.

Mounting the switch

Desk Mounting

1. Attach four rubber pads to the bottom.

2. Place the chassis on a desk.

SYS ID MGMT

CON

MGMT

S5850-24XMG

65 87

13 16

21 24

123

100G

4Breakout

SYS ID MGMT

CON

MGMT

S5850-24XMG

65 87

Rack Mounting

1. Fix front mounting brackets and silding rails to the two sides of the switch with screws.

2. Push back mounting brackets onto the silding rails.

21 24

123

26 100G

4Breakout

SYS ID MGMT

CON

MGMT

S5850-24XMG

65 87

13 16

21 24

123

26 100G

4Breakout

3. Attach the switch to the rack with screws and cage nuts.

Grounding the Switch

CAUTION: The earth connection must not be removed unless all supply connections have

been disconnected.

1. Connect one end of the grounding cable to a proper earth ground, such as the rack in which the

switch is mounted.

2. Secure the grounding lug to the grounding point on the back panel of the switch with the washer

and screws.

Connecting the Power

1. Plug the AC power cord into the power port on the back of the switch.

2. Connect the other end of the power cord to an AC power source.

Connecting the RJ45 Ports

1. Connect an Ethernet cable to the RJ45 port of a computer, printer, network storage, or other

network devices.

2. Connect the other end of the Ethernet cable to the RJ45 port of the switch.

WARNING: Do not install power cable while the power is on.

13 16

21 24

123

26 100G

4Breakout

SYS ID MGMT

CON

MGMT

S5850-24XMG

65 87

13 16

21 24

123

26 100G

4Breakout

1. Plug the compatible QSFP+ transceiver into the QSFP28 port.

2. Connect a ber optic cable to the transceiver, then connect the other end of the cable to

another ber device.

3. Or directly connect DAC/AOC cable to the QSFP28 port.

Connecting the QSFP28 Ports

CAUTION: Laser beams will cause eye damage. Do not look into bores of optical modules

or optical bers without eye protection.

Connecting the Console Port

1. Insert the RJ45 connector into the RJ45 console port on the switch.

2. Connect the DB9 female connector of the console cable to the serial port on the computer.

Connecting the MGMT Port

1. Connect one end of a standard RJ45 Ethernet cable to a computer.

2. Connect the other end of the cable to the MGMT port on the switch.

Connecting the Management Ports

SYS ID MGMT

CON

MGMT

S5850-24XMG

65 87

13 16

21 24

SYS ID MGMT

CON

MGMT

S5850-24XMG

65 87

13 16

21 24

Indice

Lingue:

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente