Fujitsu MB91F465XA Istruzioni per l'installazione e il funzionamento

The following document contains information on Cypress products.

Colophon

The products described in this document are designed, developed and manufactured as contemplated for general use,

including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not

designed, developed and manufactured as contemplated (1) for any use that includes fatal risks or dangers that, unless

extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury,

severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control,

mass transport control, medical life support system, missile launch control in weapon system), or (2) for any use where

chance of failure is intolerable (i.e., submersible repeater and artificial satellite). Please note that Spansion will not be liable

to you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products.

Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such

failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and

prevention of over-current levels and other abnormal operating conditions. If any products described in this document

represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Law

of Japan, the US Export Administration Regulations or the applicable laws of any other country, the prior authorization by the

respective government entity will be required for export of those products.

Trademarks and Notice

The contents of this document are subject to change without notice. This document may contain information on a Spansion

product under development by Spansion. Spansion reserves the right to change or discontinue work on any product without

notice. The information in this document is provided as is without warranty or guarantee of any kind as to its accuracy,

completeness, operability, fitness for particular purpose, merchantability, non-infringement of third-party rights, or any other

warranty, express, implied, or statutory. Spansion assumes no liability for any damages of any kind arising out of the use of

the information in this document.

ORNANDTM and combinations thereof, are trademarks and registered trademarks of Spansion LLC in the United States and

other countries. Other names used are for informational purposes only and may be trademarks of their respective owners.

Fujitsu Microelectronics Europe

Application Note

MCU-AN-300015-E-V11

FR FAMILY

32-BIT MICROCONTROLLER

MB91F465XA

MB91F465XA EMULATION

APPLICATION NOTE

MB91F465XA EMULATION

Revision History

MCU-AN-300015-E-V11 - 2 - © Fujitsu Microelectronics Europe GmbH

Revision History

Date Issue

2007-04-24 V1.0 MSt

Initial Version

2007-06-26

V1.1 MSt

Further description added, typos corrected

Figure 2-5 added

This document contains 40 pages.

MB91F465XA EMULATION

Warranty and Disclaimer

©Fujitsu Microelectronics Europe GmbH - 3 - MCU-AN-300015-E-V11

Warranty and Disclaimer

To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts

its warranties and its liability for all products delivered free of charge (eg. software include or

header files, application examples, target boards, evaluation boards, engineering samples of IC’s

etc.), its performance and any consequential damages, on the use of the Product in accordance with

(i) the terms of the License Agreement and the Sale and Purchase Agreement under which

agreements the Product has been delivered, (ii) the technical descriptions and (iii) all accompanying

written materials. In addition, to the maximum extent permitted by applicable law, Fujitsu

Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of the

Product and any consequential damages in cases of unauthorised decompiling and/or reverse

engineering and/or disassembling. Note, all these products are intended and must only be used

in an evaluation laboratory environment.

1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in

accordance with the accompanying written materials for a period of 90 days form the date of

receipt by the customer. Concerning the hardware components of the Product, Fujitsu

Microelectronics Europe GmbH warrants that the Product will be free from defects in material

and workmanship under use and service as specified in the accompanying written materials

for a duration of 1 year from the date of receipt by the customer.

2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability

and the customer´s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s

sole discretion, either return of the purchase price and the license fee, or replacement of the

Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in

original packing and without further defects resulting from the customer´s use or the transport.

However, this warranty is excluded if the defect has resulted from an accident not attributable

to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the

customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH.

3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH

disclaims all other warranties, whether expressed or implied, in particular, but not limited to,

warranties of merchantability and fitness for a particular purpose for which the Product is not

designated.

4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s

and its suppliers´ liability is restricted to intention and gross negligence.

NO LIABILITY FOR CONSEQUENTIAL DAMAGES

To the maximum extent permitted by applicable law, in no event shall Fujitsu

Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever

(including but without limitation, consequential and/or indirect damages for personal

injury, assets of substantial value, loss of profits, interruption of business operation,

loss of information, or any other monetary or pecuniary loss) arising from the use of

the Product.

Should one of the above stipulations be or become invalid and/or unenforceable, the remaining

stipulations shall stay in full effect

MB91F465XA EMULATION

Contents

MCU-AN-300015-E-V11 - 4 - © Fujitsu Microelectronics Europe GmbH

Contents

REVISION HISTORY............................................................................................................ 2

WARRANTY AND DISCLAIMER ......................................................................................... 3

CONTENTS .......................................................................................................................... 4

1INTRODUCTION.............................................................................................................. 6

2HARDWARE SETUP ....................................................................................................... 7

2.1 Required parts......................................................................................................... 7

2.2 Installation............................................................................................................... 8

3DIFFERENCES BETWEEN MB91F465XA AND EMULATION SYSTEM ...................... 12

3.1 Overview about differences ................................................................................... 12

3.2 Details of differences............................................................................................. 13

3.2.1 Maximum operating frequency................................................................. 13

3.2.2 FlexRay port 31 ....................................................................................... 13

3.2.3 E-Ray register start address .................................................................... 14

3.2.4 E-Ray IP version...................................................................................... 14

3.2.5 CIF0 (CUST0) register value (Customer Register)................................... 14

3.2.6 CREL register value (Core Release Register).......................................... 14

3.2.7 E-Ray clock control register ..................................................................... 14

3.2.8 E-Ray Interrupts....................................................................................... 15

3.2.9 Interrupt Vector Table (file vectors.c) ....................................................... 15

3.2.10 DMA 16

4SOFTUNE WORKBENCH ............................................................................................. 17

4.1 Update of Softune Workbench............................................................................... 17

4.2 Template Workspace for MB91F465XA series ...................................................... 17

Amuster of the macro switch is:............................................................................ 18

4.2.1 Use Configuration EMULATOR ............................................................... 19

4.2.2 Use configuration STANDALONE............................................................ 23

5APPENDIX..................................................................................................................... 24

5.1 MB88121B Register .............................................................................................. 24

5.1.1 MB88121B Register Map......................................................................... 24

5.1.2 CIF1 (CCNT) Register / Clock Control Register ....................................... 28

5.1.3 CIF2 (CUS2) Register.............................................................................. 32

5.2 Software part......................................................................................................... 35

5.2.1 Activating FlexRay PLL............................................................................ 35

MB91F465XA EMULATION

Contents

©Fujitsu Microelectronics Europe GmbH - 5 - MCU-AN-300015-E-V11

5.2.2 Vectors.c file ............................................................................................ 37

5.3 Related Documentation......................................................................................... 39

5.4 Figures .................................................................................................................. 40

5.5 Tables ................................................................................................................... 40

MB91F465XA EMULATION

Chapter 1 Introduction

MCU-AN-300015-E-V11 - 6 - © Fujitsu Microelectronics Europe GmbH

1 Introduction

This application note describes the emulation system for MB91F465XA series.

The current emulation system is based on EVA device MB91V460A, which does not include

aFlexRay interface. For that reason the FlexRay interface is emulated by MB88121B series

stand alone FlexRay communication controller. The MB88121B is connected to the bus

interface of MB91V460A.

MB91F465XA EMULATION

Chapter 2 Hardware Setup

©Fujitsu Microelectronics Europe GmbH - 7 - MCU-AN-300015-E-V11

2 Hardware Setup

The chapter describes the setup of the Emulation system

2.1 Required parts

To Emulate the MB91F456XA series following parts are required:

1. MB2198-01 Emulator Main Unit

2. MB2198-10: DSU4 cable

3. EMA-MB91V460A-00x: Adapter board, including MB91V460A

4. EMA-MB91V460A-100: FlexRay extension board, including MB88121B

5. EMA-MB91F465X-NLS-100M20: Socket adapter board

6. NQPack100SD-ND: Socket for package FPT-100P-M20

(Tokyo Eletech Corp. www.tetc.co.jp/e_tet.htm)

On the target system a NQPack100SD-ND socket is required enabling connection to EMA-

MB91F465X-NLS-100M20 board.

Figure 2-1: Hardware Parts

MB91F465XA EMULATION

Chapter 2 Hardware Setup

MCU-AN-300015-E-V11 - 8 - © Fujitsu Microelectronics Europe GmbH

2.2 Installation

For detailed installation instruction see the user guides of the emulation tools.

In addition there are several application notes for MB2198-01 emulator available, describing

features and software installation (e.g. USB drivers).

1. Connect the EMA-MB91F465X-NLS-100M20 socket adapter board to the

NQPack100SD-ND of the target hardware (PCB). The target hardware must use a

socket otherwise it is not possible to connect the socket adapter board to the target

board. Fasten the four screws using the screw driver delivered in the package.

Figure 2-2: EMA-MB91F465X-NLS-100M20 at target system

Note:

Remove the Flash chip from the socket before connecting the

socket adapter board to the socket!

Pin 1

Indice

Altri manuali Fujitsu Microcontrollore

Fujitsu

Fujitsu F2MC-16LX Series Manuale utente

Fujitsu

Fujitsu MB904 Series Istruzioni per l'installazione e il funzionamento

Fujitsu

Fujitsu MB90480 Series Manuale utente

Fujitsu

Fujitsu MB90895 Series Manuale utente

Fujitsu

Fujitsu F2MC-16LX Series Manuale utente

Fujitsu

Fujitsu F2MC-8L Series Manuale utente

Fujitsu

Fujitsu F2MC-8L MB89210 Series Manuale utente

Fujitsu

Fujitsu MB91460 SERIES Istruzioni per l'installazione e il funzionamento

Fujitsu

Fujitsu ALL FR 460 Series Istruzioni per l'installazione e il funzionamento

Fujitsu

Fujitsu MB90M405 Manuale utente

Fujitsu

Fujitsu MB86R02 Istruzioni per l'installazione e il funzionamento

Fujitsu

Fujitsu F2MC-8L MB89620 Series Manuale utente

Fujitsu

Fujitsu F2MC-8FX MB95200H/210H Series Istruzioni per l'installazione e il funzionamento

Fujitsu

Fujitsu F2MC-16LX Series Manuale utente

Fujitsu

Fujitsu F2MC-8FX MB95200H/210H Series Istruzioni per l'installazione e il funzionamento

Fujitsu

Fujitsu F2MC-16LX Series Manuale utente

Fujitsu

Fujitsu JASMINE Manuale utente

Fujitsu

Fujitsu MB95210H Series Istruzioni per l'installazione e il funzionamento

Fujitsu

Fujitsu BBF2004 Series Manuale utente

Fujitsu

Fujitsu MB96300 series Manuale utente

Fujitsu

Fujitsu FR Family Manuale utente

Fujitsu

Fujitsu FR Family FR60 Lite Manuale utente

Fujitsu

Fujitsu FR Family FR60 Lite Manuale utente

Fujitsu

Fujitsu MB95200H Series Manuale utente

Manuali Microcontrollore popolari di altre marche

AMS

AMS AS7261 Demo Kit Manuale utente

Novatek

Novatek NT6861 Manuale utente

Espressif Systems

Espressif Systems ESP8266 SDK Guida all'installazione

Nuvoton

Nuvoton ISD61S00 ChipCorder Guida

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuale utente

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuale utente

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuale utente

NEC

NEC 78GK0S/K 1+ Series Istruzioni per l'installazione e il funzionamento

Mikroe

Mikroe SEMITECH N-PLC Click Istruzioni per l'installazione e il funzionamento

Intel

Intel Agilex Manuale utente

Cypress

Cypress CY4607 HX2VL Manuale utente

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuale utente

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuale utente

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuale utente

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuale utente

Espressif Systems

Espressif Systems ESP8266EX Istruzioni operative

Abov

Abov AC33M8128L Manuale utente

Laird

Laird BL654PA Manuale utente