Fujitsu FTP-644MCL001 Guida all'installazione

FTP-644MCL001/002/FTP-624DCL/DSL

■OVERVIEW

FTP-644MCL/FTP-624DCL/DSL Series is a high speed line

thermal printer driven by battery, printing on 4-inch wide paper

(112 mm/ 114 mm).

The printer is compact and lightweight, and the design allows

easy head maintenance, head cleaning and head replacement.

This printer is suitable for a variety of applications, such as hand

held terminals, POS terminals, ticket machines, coupon

machines, label printers, etc.

■HIGHLIGHTS

• High speed printing

It can print at 50 mm/s (400 dotlines/s) maximum by using

Fujitsu Components' unique head drive control.

• Compact and lightweight

The printer has a low profile of only 20 mm, and a light weight

of approximately 125 g.

• Low power consumption

The peak current for head drive is only 3.5 A (8.5VDC, 128

dots on).

• Easy head access

It is designed for easy head cleaning and head replacement.

• Paper auto loading function

Thermal paper can be loaded without head-up lever

operation.

• UL recognized

File No. E171434

BATTERY DRIVE, FTP-604 Series

4” TYPE MECHANISM AND INTERFACE BOARD

FTP-644MCL001

FTP-624DCL/DSL002

FTP-624CU102

FTP-644MCL001/002/FTP-624DCL/DSL002

■DESIGNATION

*1: 001 is for front paper insertion (curl path) and 002 is for rear paper insertion (straight path).

*2: 002 supports ANK, 102 support ANK and Kanji.

*3: 002 supports ANK, 103 support ANK and Kanji.

Part number FTP-644MCL001/002

Printing method Thermal-sensitive line dot method

Dot structure 832 dots/line

Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density

Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch

Effective printing area 104 mm

Paper width (MCL001) 112 mm

Paper width (MCL002) 114 mm

Paper thickness 60 to 100 µm*1

Number of columns 104 columns/line (16 ×8 dot font)

400 dotlines/s (50 mm/s)

[Condition] 1 ply, printing on high sensitive thermal paper,

8 columns of “H” /line, double density 16 ×8 dot font,

room temperature, 8.5 VDC drive

JIS ANK : 128 International : 195

Character types ASCII : 31

24 ×12 dots, (3.0 ×1.5 mm), 69 columns

16 ×8 dots, (2.0 ×1.0 mm), 104 columns

16 × 16 dots, (4.0 ×2.0 mm), 52 columns

24 ×24 dots, (6.0 ×3.0 mm), 34 columns

Interface Centronics / RS-232C

■GENERAL SPECIFICATIONS

SpecificationsItem

Maximum printing speed

Character composition, dimensions (H×W),

Number of characters

(Continued)

Printer mechanism FTP-644MCL001/002*1

RS-232C

LSI Micro Controller Unit FTP-624CU102

Thermal head cables FTP-624Y002, FTP-624Y003

Parallel interface cable FTP-441Y201

Cables Serial interface cable FTP-624Y301

Power cable (logic, head and motor) FTP-621Y401, FTP-621Y601

Part numberItem

FTP-624DCL002*2

FTP-624DSL002*3

Centronics

Interface Board

FTP-644MCL001/002/FTP-624DCL/DSL002

For head Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)

Peak current: approx. 3.5 A (conditions: room temp., 7.2VDC, 128 dots on)

For motor Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)

Peak current: approx. 0.8 A (conditions: room temp., 7.2 VDC)

For logic Voltage: 5 VDC ±5%

Current: 0.2 A maximum

Mechanism 138 (W) ×46 (D) ×20 (H) mm (excluding lever and knob diameter)

Dimensions Interface board 131 (W) ×89(D) ×24 (H) mm

Weight (Mechanism) approximately 125 g

Expected life Mechanism Pulse durability: 1 ×108pulse/dot (using Fujitsu Takamisawa's standard

driving method)

Wear resistance: 50 km (at 12.5% print ratio)

Operating temperature 0 to +50°C*2

Operating humidity 20 to 85% RH (no condensation)

Storage temperature –20 to +60°C

Storage humidity 5 to 95% RH (no condensation)

Head temperature By thermistor (applied energy control, abnormal temperature detection)

Detection Paper out/Mark detect By photointerrupter

Head-up By microswitch

For front insertion use (112 mm width) : FTP-040PU001, FTP-040PG021

For rear insertion use (114 mm width) : FTP-040P0020, FTP-040PG106

Recommended thermal sensitive paper In Europe (112 mm width) :FTP-041P0060-45

· Oji Paper : PD160R, PD170R, PD150R

· NIPPON Paper : TF50KS-E4, TF60KS-E,TF50KS-E

· MITSUBISHI Paper Mills : P220VBB-1, AFP-235

SpecificationsItem

(Continued)

Power

supply

Environmental

conditions

*1: There may be exceptions.

*2: Guarantee +5°C to +40°C.

FTP-644MCL001/002/FTP-624DCL/DSL002

■DIMENSIONS

Unit: mm

20.1

(150)(7.5)

45.51.5

65.771.8

±1

(137.5)

HEAD CONNECTOR

2-MOUNTINGHOLE

CENTER OFPAPER

HEAD UPLEVER (AT HEAD DOWN)

PAPER INSERTION

(MCLOO1)

PAPER INSERTION

(MCLOO2)

Printer mechanism

FTP-644MCL001/002/FTP-624DCL/DSL002

Interface board

Unit: mm

88.9

78.7

39.4

5.1

15.2

5.15.1

5.1

120.7

105.4

120.7

105.4

130.8

73.7

CN1

CN11

CN5

CN3

CN8

CN4

26.7

CN6

CN7

52.1

CN2

86.4

59.7

CN12

CN10

71.1

33.0

CN9

Mounting Height

17.0

5.0

4-03.6

114.2

* CN9 on FTP-624DSL only

** CN8, CN11, CN12 not used

■FUNCTION

ITEM ITEM

1. Test printing 8. Motor power save

2. Paper-out detection 9. Mark detection

3. Paper near end detection 10. MCU trouble detection

4. Head-up detection 11. Power on/off sequence protection

5. Abnormal temp. of thermal head detection 12. Motor protection

6. Blown fuse detection 13. Hardware timer

7. Abnormal voltage detection of head

FTP-644MCL001/002/FTP-624DCL/DSL002

■CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM

1. Thermal Head

Head side 1 : B11B-PH-K-S-2.2 (J.S.T.) or equivalent

2: B10B-PH-K-S-2.2 (J.S.T.) or equivalent

Board side 1: PHR-11 (J.S.T.) or equivalent

2: PHR-12 (J.S.T.) or equivalent

*1: Symbol: " " means a negative logic signal

Motor Thermal head heat sink Head up level

Connector Pin No.

3. Sensor connectors

Sensor : PHR-5 (J.S.T.) or equivalent

Board side : B5B-PH-K-S (J.S.T.) or equivalent

.oNlangiStnemmoC

1NESVrosnesrepaprofrewoP

2EHProttimeretpurretniotohP

3KHPedohtacretpurretniotohP

41WS1hctiwstcetedpudaeH

52WS2hctiwstcetedpudaeH

.oNlangiStnemmoC

1B noitaticxeliocrotomgnippetS

2B noitaticxeliocrotomgnippetS

3A noitaticxeliocrotomgnippetS

4A noitaticxeliocrotomgnippetS

.oNlangiStnemmoC

1HVdaehrofrewoP

2HVdaehrofrewoP

3DNGdnuorgdaeH

4DNGdnuorgdaeH

5*HT

noitcetederutarepmeT

61BTS1langiselbanetnirP

72BTS2langiselbanetnirP

83BTS3langiselbanetnirP

94BTS4langiselbanetnirP

01DDVcigolrofrewoP

.oNlangiStnemmoC

15BTS5langiselbanetnirP

26BTS6langiselbanetnirP

37BTS7langiselbanetnirP

48BTS8langiselbanetnirP

5KLCkcolcnoissimsnartataD

6TALlangisgnihctalatadtnirP

7NIDlangistuptuoatadtnirP

8DNGdnuorgdaeH

9DNGdnuorgdaeH

01HVdaehrofrewoP

11HVdaehrofrewoP

Connector Thermal Head 1 Connector Thermal Head 2

1, 2, 3, ...............9, 10 1, 2, 3, ...............10, 11

FTP-644MCL001/002/FTP-624DCL/DSL002

trademarks of their respective owners. Rev. 11/15/2004.

Japan

Fujitsu Component Limited

Gotanda-Chuo Building

3-5, Higashigotanda 2-chome, Shinagawa-ku

Tokyo 141, Japan

Tel: (81-3) 5449-7010

Fax: (81-3) 5449-2626

Email: [email protected]

Web: www.fcl.fujitsu.com

North and South America

Fujitsu ComponentsAmerica, Inc.

250 E. Caribbean Drive

Sunnyvale, CA 94089 U.S.A.

Tel: (1-408) 745-4900

Fax: (1-408) 745-4970

Email: [email protected]

Web: www.fcai.fujitsu.com

Europe

Fujitsu Components Europe B.V.

Diamantlaan 25

2132 WV Hoofddorp

Netherlands

Tel: (31-23) 5560910

Fax: (31-23) 5560950

Email: [email protected]

Web: www.fceu.fujitsu.com

Asia Pacific

Fujitsu Components Asia Ltd.

102E Pasir Panjang Road

#04-01 Citilink Warehouse Complex

Singapore 118529

Tel: (65) 6375-8560

Fax: (65) 6273-3021

Email: [email protected]

www.fcal.fujitsu.com

Fujitsu Components

International

Headquarter

Offices

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fujitsu Accessori per stampanti

Fujitsu

Fujitsu 240 SERIES Manuale utente

Fujitsu

Fujitsu Black Background Kit Manuale utente

Fujitsu

Fujitsu SCA.1 Manuale utente

Fujitsu

Fujitsu FTP-627 Series Manuale utente

Fujitsu

Fujitsu FTP-634MCL001 Guida all'installazione

Fujitsu

Fujitsu FTP-639MCL103/383-R Manuale utente

Fujitsu

Fujitsu fi-434PR Manuale utente

Fujitsu

Fujitsu PA03740-K010 Guida alla configurazione

Fujitsu

Fujitsu PA03753-0002 Guida alla configurazione

Fujitsu

Fujitsu FTP-629MCL054 Manuale utente

Fujitsu

Fujitsu FTP-632MCL101 Guida all'installazione

Fujitsu

Fujitsu FTP-020P Series Manuale utente

Fujitsu

Fujitsu IMAGE SCANNER FI-486PRFR Manuale utente

Fujitsu

Fujitsu RX-7100 Manuale tecnico

Fujitsu

Fujitsu FI-590PRF Operators Manuale

Fujitsu

Fujitsu PR-LN4 Manuale utente

Fujitsu

Fujitsu Fi-718PR Manuale

Fujitsu

Fujitsu fi-553PR Manuale

Manuali Accessori per stampanti popolari di altre marche

Star Micronics

Star Micronics TSP800 Series Manuale utente

REA

REA JET HR pro 2K Manuale utente

HP Laserjet,Color Laserjet 4si Manuale utente

oliser

oliser MS 45 Manuale utente

Roland

Roland DU2-64 Istruzioni e ricette

Xerox

Xerox EFI EXP6000 Manuale utente

Canon

Canon Finisher-T1 Manuale utente

Sharp

Sharp FO-1MK Manuale utente

Labelmate

Labelmate PM-300 Manuale utente

Epson

Epson T6248 Manuale operativo

Epson

Epson OT-BZ20 Manuale utente

Canon

Canon TonerRobot EP-27 Manuale utente

Ricoh

Ricoh LCIT RT5100 Guida rapida

GBC

GBC 16 Series Manuale utente

Canon

Canon INNER 2-WAY TRAY-E1 Manuale operativo e di manutenzione

Develop

Develop SD-509 Manuale utente

Kyocera

Kyocera KM-6230 Manuale

Triumph Adler

Triumph Adler DF-710 Manuale