Fujitsu DL7400 Manuale utente
Installation guide for Fujitsu Dot Matrix Printer_1.6 Page 1
Installation Guide for Fujitsu Dot Matrix Printer 1.6
Version History:
VERSI N
DESCRIPTI N
AUTH R
DATE
0.1
Draft written for first initial review
Henry Chan
20Oct2011
0.2
Update the
prerequisites section & minor
chan es
Henry Chan
21Oct2011
1.0
Added additional prerequisites
Henry Chan
4Nov2011
1.2
-
Updated the prerequisites for user &
en ineer.
- 2 eneric local administrator account &
password for CX owned PC
Prashant Pande
30Nov2011
1.3
Incorporate documentation for IE8 settin s
required for ezyfrei ht Print MAWB
function
Pak Won
03Jan2012
1.4
Updated
the installation pre
-
requisites
for
IE requirements.
Pak Won
11Jan2012
1.5
Updated the installation pre
-
requisites for
CX PC Asset Ids.
Pak Won
18Jan2012
1.6
Updated the skippin of IE security settin
for CX computers
Henry Chan
14Feb2012
About this manual:
This installation uide is desi ned for onsite Fujitsu en ineer to:
1. Unpack and setup the dot matrix printer;
2. Install the printer drivers; and
3. Be able to print the AWB print form via the Ezyfrei ht web application.
Fujitsu DL7400 Dot Matrix Printer will be used as an example in this manual.
Please read this Installation Guide thoroughly before going onsite to
perform the installation. If you have any questions regarding the
installation procedure please contact Fujitsu Hong Kong
(<[email protected]su.com>).
Installation guide for Fujitsu Dot Matrix Printer_1.6 Page 2
Prerequisites for End User:
No.
Task
Complete
(Please tick)
1
One dedicated
workstation should be provided to connect to the printer
2
One available USB port on the dedicated workstation for connectin the
printer
3
CD/DVD ROM is installed at the dedicated workstation for installin printer
driver
4
The printer should be
placed on a stable level surface
5
One available power outlet for connectin the printer
6
The distance between the dedicated workstation and printer should be less
than 1 metre (i.e. the len th of the USB cable)
7
The distance between the power outlet and printer should be less than 1
metre (i.e. the len th of the electrical cable)
8
Reserve additional place at the front of the printer for placin the print form
stack
9
User account with local administrator
ri ht for installin the printer drivers
10
Microsoft .NET Framework 2.0 should be installed on the dedicated
workstation
11
User ID and password ready and verify the connectivity to access the
Ezyfrei ht website
12
The printer location should not
be an area exposed to direct sunli ht or near
heaters
13
Do not expose the printer location to extremes of temperature and humidity
14
Make sure the printer location is well
-
ventilated and free from excessive dust
15
User has neutral AWBs (Air
Waybills
–
preprinted stationery) for confi urin
the printer ali nment.
16
Workstation to be installed with the
ezyfrei ht
print software
must
have
Microsoft Internet Explorer v7 or v8 installed on it. Other versions of the
software are not supported by ezyfrei ht.
17
If End Users are usin CX GalaCXy PC, the PC asset IDs (which are in the format
“MXXXXXX” on a sticker attached to the PC) should be provided to the Fujitsu
En ineer before they are onsite for the installation. The reason is that some
IE8 confi urations settin s need to be remotely deployed to the PC in order for
neutral printin to work.
Installation guide for Fujitsu Dot Matrix Printer_1.6 Page 3
Prerequisites for Fujitsu Engineer:
No.
Task
Complete
(Please tick)
1
Inform the user one week in advance before onsite, to prepare and complete
the above section “Prerequisites for End User”.
Please contact Fujitsu Hong Kong contact (<lchau@h .fujitsu.com>) if the End
User is not able to provide all the prerequisites above.
2
Make the appointment with user at least 2 days in advance before installin the
printer onsite and remind the user to complete the prerequisite tasks.
Check with user whether the dedicated workstation to be installed belongs to
CX (Cathay Pacific) or GHA (Ground Handling Agent).
•If it belon s to CX then you can use the local administration passwords
provided on page 14 – Installing the printer driver.
•If GHA, then ask the user to arran e for local GHA technical support to
be available to provide a local admin account to use of the installation.
3
Remember to bring a 1.5
-
2 metre USB 2.0 (Type A to B) cable for connecting
the printer. Extension cable is not recommended to use
Here is a sample cable:
4
Remember to bring a 1.5
-
2 metre
power cord for plugging the printer.
Extension cable is not recommended to use
Cable type connect to printer (other side please refer to the local socket type)
5
Copy
the CASP L.zip file batch program before
travelling
onsite
, as this is
required for the configuration of the ezyfreight printing.
Double-click on the icon below to download the file.
CASPOL.zip
(Alternate download link : http://ftp.fhk.com.hk/Download/CASPOL.zip)
please refer to page 27 for information
Installation guide for Fujitsu Dot Matrix Printer_1.6 Page 4
No.
Task
Complete
(Please tick)
6
W
ebsite
http://jp.fujitsu.com/ roup/fit/en/support/downloads/dl7/
to
download the driver for Fujitsu DL7400 for backup purpose, in case the CD
driver software cannot be read
7
Call the user 2 hours before onsite to re
-
confirm the appointment
8
If the
dedicated workstation
to in
stall the printer is owned by GH
A, please a
sk
local GHA support staff to provide with local administrator
username/password.
9
If the installation is on a CX GalaCXy PC then et the PC Asset Id (which is in the
format “MXXXXXX”) and submit it to the Fujitsu Hon Kon team so that the
required IE8 confi uration settin s can be set remotely. The Fujitsu Engineer
should not go onsite until it has been confirmed that the IE8 configurations
have been deployed to the specified PC.
Important Notes for Fujitsu Engineer:
-Based on the customer request, there is one dedicated workstation required
to install the printer software by the onsite engineer.
-nly the Fujitsu printer software and the Ezyfreight batch program can be
installed on the user workstation, any other software installation requests
with/without user requests are prohibited. By performing such request
which is not allowed, will severely violate customer’s security policy.
Installation guide for Fujitsu Dot Matrix Printer_1.6 Page 5
Installing procedures for Fujitsu Engineer:
Fujitsu DL7400 Dot Matrix Printer will be used as an example in this section.
Unpacking the printer
1. Open the carton box and remove the printer and its components, please handle with care.
Make sure that you have all of the items shown below. DO NOT use the power cord inside the
packa e and use the power cord prepared by the en ineer.
2. Carefully examine each item for dama e. Report any problem is found.
Installation guide for Fujitsu Dot Matrix Printer_1.6 Page 6
3. Place the printer with care to the place where user plans to use it.
4. Remove the tapes and cushions securin the printer. Open the front over and remove the
shippin restraint cardboard that holds the print head carria e in place (show below).
5. Inform the user to store the ori inal shippin carton box and packa in materials for at least 1
week in case for full packa e RMA
Installation guide for Fujitsu Dot Matrix Printer_1.6 Page 7
Setting the paper table
Turn the paper table (1) as shown in the table below, the push it (2) and set it (3)
The complete setup conditions are shown below. Make sure that the top end of the paper table is
en a ed with the printer uide pin and the uide pin on the paper table is inserted into the cover
roove.
Installing the Ribbon cartridge
1. Before installin the ribbon cartrid e, make sure the power cord is not connected or turn off the
printer
Installation guide for Fujitsu Dot Matrix Printer_1.6 Page 8
2. Open the front cover of the printer. Slide the print head carria e so that its centre is at the position
for replacin the ribbon cartrid e
3. Remove the ribbon cartrid e from its packa e. Push in the two ribbon release tabs on the side, and
slide the roller from the L CK position to the FREE position. Turn the ribbon feed knob clockwise to
be sure that it feeds properly.
Installation guide for Fujitsu Dot Matrix Printer_1.6 Page
4. Thread the ribbon between the print head and the print uide, ently press down on the ribbon
cartrid e a ainst the printer until it clicks into place.
5. Turn the ribbon feed knob clockwise to take up any slack in the ribbon.
6. Close the front cover.
Installation guide for Fujitsu Dot Matrix Printer_1.6 Page 10
Connecting the USB 2.0 interface cable
1. Attach the one end of USB cable (Type B connector) to the USB connector at the ri ht side of the
printer.
2. Attach the other end of USB cable (Type A connector) to one of the available port of the dedicated
workstation.
Altri manuali per DL7400
3
Indice
Altri manuali Fujitsu Stampante
Fujitsu
Fujitsu FTP-627MCL353 Manuale utente
Fujitsu
Fujitsu FTP-621CT001 Manuale utente
Fujitsu
Fujitsu FTP-637MCL401 Manuale utente
Fujitsu
Fujitsu 10 ppm Manuale utente
Fujitsu
Fujitsu ULTIMA90 Manuale utente
Fujitsu
Fujitsu FTP-627MCL053 Manuale utente
Fujitsu
Fujitsu RS-232C Manuale utente
Fujitsu
Fujitsu Impact 3650 Manuale utente
Fujitsu
Fujitsu DL7400Pro Manuale utente
Fujitsu
Fujitsu FTP-628 Series Manuale utente
Fujitsu
Fujitsu ApeosPrint C4030 Manuale utente
Fujitsu
Fujitsu Fi-718PR Manuale
Fujitsu
Fujitsu DL7400 Manuale utente
Fujitsu
Fujitsu FI-6670A Guida alla configurazione
Fujitsu
Fujitsu DL 1000 Manuale utente
Fujitsu
Fujitsu DPMG9 Manuale utente
Fujitsu
Fujitsu DL3700 Pro Manuale utente
Fujitsu
Fujitsu DL7600 Manuale utente
Fujitsu
Fujitsu Print partner 14 AV Manuale utente
Fujitsu
Fujitsu fi-475PR Manuale utente
