Fujitsu FTP-632MCL001 Manuale utente
FTP-632MCL001/002/303/304
■OVERVIEW
FTP-632MCL/FTP-622DCL Series is an ultra high speed line
thermal printer driven by 24 VDC, printing on 3-inch wide paper
(80 mm/85 mm).
This printer is compact and light weight, and the design allows
easy head maintenance, head cleaning and head replacement.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, coupon machines, label printers,
medical instruments, etc. A printer with a specially designed
cutter is also available.
■HIGHLIGHTS
• Ultra high speed printing
It can print at 80 mm/s (640 dotlines/s) maximum by using
Fujitsu Components' unique head drive control.
• Compact and lightweight
This printer has a low profile of only 20 mm, and a light
weight of approximately 94 g.
• Low power consumption
The peak current for head driving is approximately 2.9 A (at
80 mm/s printing speed, 50% printing ratio).
• Easy head access
It is designed for easy head cleaning and head replacement.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• ESC/POSTM*1 Commands
The commands conform to ESC/POSTM.
• Auto Cutter
Printer with auto cutter (full cut/partial cut) is also available.
• UL Recognized
File No.E171434
*1 ESC/POSTM is a registered trademark of SEIKO EPSON Corp.
24V DRIVE, HIGH SPEED LINE
THERMAL PRINTER
3” MECHANISM, WITH OR WITHOUT CUTTER
FTP-632MCL001
FTP-622DCL001
FTP-632MCL303/304
1
2
FTP-632MCL001/002/303/304
■DESIGNATION
Part number
Standard FTP-632MCL001/002*1
FTP-632MCL303/304*1
FTP-622DCL001/011*2
FTP-622DSL001/011/012*3
FTP-622CU101*4
FTP-622Y001
FTP-622Y201
FTP-622Y301
FTP-622Y401
Item
Printer mechanism
Interface board
(Continued)
Parallel (Centronics Standard)
Serial (RS232C)
Thermal head cable
Parallel interface cable
Serial interface cable
Power cable
*1: 001/303 is for front paper insertion (curl path) and 002/304 is for rear paper insertion (straight path).
*2: 001/011 supports ANK and 101 supports ANK + Kanji.
*3: 001/011/012 supports ANK and 111 supports ANK + Kanji.
*4: CU101 supports Kanji and cutter control.
■GENERAL SPECIFICATIONS
Cables
LSI(MCU)
Printer mechanism with cutter
Part number FTP-632MCL001/002 FTP-632MCL303/304
Printing method Thermal-sensitive line dot method
Dot structure 576 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 72 mm
MCL001/303 80 mm
Paper width MCL002/304 85 mm
Paper thickness 60~100 µm*160~100 µm*1
Cutter type --- full or partial
Number of columns 48 columns/line (24×12 dot font)
Maximum printing speed 640 dotlines/s (80 mm/s)
Alphanumeric KANA: 159 International characters: 195
Character types JIS KANJI (FTP-622DCL101/111): approximately 6800
24 ×12 dots, (3.0 ×1.5 mm), 48 columns
24 ×24 dots, (3.0 ×3.0 mm), 24 columns
16 ×8 dots, (2.0 ×1.0 mm), 72 columns
16 ×16 dots, (2.0 ×2.0 mm), 36 columns
SpecificationsItem
Character composition, dimensions (H×W),
Number of characters
3
FTP-632MCL001/002/303/304
Part number FTP-632MCL001/002 FTP-632MCL303/304
Interface Centronics (ESC/POSTM), RS232C
24 VDC ±5%, Voltage
Current : average*2( ): Peak
For head 1.11 (1.45) A (at 80 mm/s printing speed, 25% printing ratio)
0.81 (1.45) A (at 50 mm/s printing speed, 25% printing ratio)
0.75 (0.87) A (at 30 mm/s printing speed, 25% printing ratio)
For motor 24 VDC ±5%, 1.0 A maximum
For cutter --- 24 VDC ±5%, 1.0 A maximum
For logic 5 VDC ±5%, 0.5 A maximum
Mechanism
108 (W) ×48 (D) ×20 (H) mm (Excluding lever)
117 (W) ×57 (D) ×38 (H) mm
Interface board 131 (W) ×89 (D) ×24 (H) mm
Weight approximately 94 g approximately 330 g
Expected life Mechanism Pulse durability : 1 ×108pulse/dot (using Fujitsu's standard driving
method)
Wear resistance : 50 km (at 25% printing ratio)
Cutter --- 500,000 cuts
Operating temperature 0 to +50°C*3
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C (excluding paper)
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)
Detection Paper out/Mark detect By photointerrupter
Head-up By microswitch
For front insertion use (80 mm width) : FTP-030PU001, FTP-030P0701
For rear insertion use (85 mm width) : FTP-030P0020, FTP-030P0702
*Recommended papers
· Oji Paper : PD150R, PD160R, PD170R
· NIPPON Paper : TF50KS-E,TF60KS-E,TF60KJ-R
· MITSUBISHI Paper Mills : P220VBB-1, AFP-235
Power supply
Dimensions
SpecificationsItem
(Continued)
Environmental
conditions
Recommended thermal sensitive paper
*1: There may be exceptions.
*2: 24 VDC, minimum head resistance.
*3: Guarantee: +5°C ~+40°C.
4
FTP-632MCL001/002/303/304
■DIMENSIONS
Mechanism
Unit: mm
20.1
(250)47.530.5
21.0
50.957.0
1
(107.9)
HEAD CONNECTOR
3-MOUNTINGHOLE(M2)
2-POSITIONINGHOLE
CENTER OFPAPER
HEAD UPLEVER(AT HEAD DOWN)
+
–
PAPER INSERTION(MCL001)
PAPER
INSERTION
(MCL002)
76.8(POSITIONINGHOLEPITCH)
Interface board
Unit: mm
88.9
78.7
39.4
39.4
5.1
5.15.1
5.15.1
5.1
5.1
5.1
120.7
105.4
120.7
116.8
87.6
130.8
43.295.4
CN10
CN5CN2** CN3
CN1
CN8
CN13
CN11*
19.1
*CN11 on FTP-622DCL011/111 & 622DSL011/112only
**CN2on FTP- 622DSL only
4—ø3.6
FTP-632MCL001/002
5
FTP-632MCL001/002/303/304
Unit: mm
(sensor cable)
(motor cable)
(cutter cable)
3-2.0 or less
Unit: mm
Interface board
88.9
78.7
39.4
39.4
5.1
5.1 5.1
5.1 5.1
5.1
5.1
5.1
120.7
105.4
86.4
120.7
116.8
87.6
130.8
43.2
CN10
CN5 CN3
CN2*
CN1
CN8
CN13CN11
19.1
4-Ø3.6
*CN2 on FTP-622DSL only
■DIMENSIONS
Mechanism
FTP-632MCL303/304
6
FTP-632MCL001/002/303/304
■CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM
1. Thermal Head
Head side : B16B-PH-K-S-2.2 (J.S.T.) or equivalent
Board side : PHR-16 (J.S.T.) or equivalent
2. Motor connectors
Motor side : PHR-4 (J.S.T.) or equivalent
Board side : B4B-PH-K-S (J.S.T.) or equivalent
*1: Symbol: " " means a negative logic signal
1, 2, 3, ......................................15, 16
Motor Thermal head heat sink Head up level
Connector Pin No.
3. Sensor connectors
Sensor : PHR-5 (J.S.T.) or equivalent
Board side : B5B-PH-K-S (J.S.T.) or equivalent
7
FTP-632MCL001/002/303/304
■INTERFACE, COMMAND, OPTIONS
■FUNCTION
ITEM ITEM
1. Test printing 8. Cutter trouble detection
2. Paper-out detection 9. Motor power save
3. Paper near end detection 10. Mark detection
4. Head-up detection 11. MCU trouble detection
5. Abnormal temperature detection of thermal head 12. Power on/off sequence protection
6. Blown fuse detection 13. Motor protection
7. Abnormal voltage detection of head 14. Hardware timer
Please refer to the FTP-622DCL DATA SHEET and the FTP-622DSL DATA SHEET for Interface, Command, and
Options.
4. Cutter
Mech side : EHR-4 (J.S.T.) or equivalent
Board side : B4B-EH (J.S.T.) or equivalent
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 06/2002
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Fujitsu Stampante
Fujitsu
Fujitsu 10 ppm Manuale utente
Fujitsu
Fujitsu FTP-608 Series Manuale utente
Fujitsu
Fujitsu fi-7480 Manuale utente
Fujitsu
Fujitsu DPMG9 Manuale utente
Fujitsu
Fujitsu PrintPartner 10V Manuale utente
Fujitsu
Fujitsu FTP-627MCL054 Manuale utente
Fujitsu
Fujitsu DL3800 Pro Manuale utente
Fujitsu
Fujitsu Impact 4550 PRO Manuale utente
Fujitsu
Fujitsu DL-6400 Manuale utente
Fujitsu
Fujitsu FP-1000 Manuale utente
Fujitsu
Fujitsu 628WSL110H2 Manuale utente
Fujitsu
Fujitsu PrintPartner Manuale utente
Fujitsu
Fujitsu N7100E Manuale utente
Fujitsu
Fujitsu DX2300 Manuale utente
Fujitsu
Fujitsu M304X series Manuale
Fujitsu
Fujitsu PrintPartner 8000 Manuale utente
Fujitsu
Fujitsu FTP-628WSL210 Series Manuale utente
Fujitsu
Fujitsu DL3400 Manuale utente
Fujitsu
Fujitsu FTP-628WSL Manuale utente
Fujitsu
Fujitsu DX2100 Manuale utente
