Fujitsu MDG3064UB Manuale utente

MDG3064UB, MDG3130UB

OPTICAL DISK DRIVES

MAINTENANCE MANUAL

C156-F046-01EN

FOR SAFE OPERATION

Handling of This Manual

This manual contains important information for using this product. Read thoroughly before using

the product. Use this product only after thoroughly reading and understanding especially the

section "Important Alert Items" in this manual. Keep this manual handy, and keep it carefully.

FUJITSU makes every effort to prevent users and bystanders from being injured or from suffering

damage to their property. Use the product according to this manual.

This product is designed and manufactured for use in standard applications such as office work,

personal devices and household appliances. This product is not intended for special uses (atomic

controls, aeronautic or space systems, mass transport vehicle operating controls, medical devices for

life support, or weapons firing controls) where particularly high reliability requirements exist,

where the pertinent levels of safety are not guaranteed, or where a failure or operational error could

threaten a life or cause a physical injury (hereafter referred to as "mission-critical" use). Customers

considering the use of these products for mission-critical applications must have safety-assurance

measures in place beforehand. Moreover, they are requested to consult our sales representative

before embarking on such specialized use.

First Edition October 2001

The contents of this manual may be revised without prior notice.

The contents of this manual shall not be disclosed in any way or reproduced in any media without

the express written permission of Fujitsu Limited.

C156-F046-01EN

Revision History

(1/1)

Edition Date Revised section (*1)

(Added/Deleted/Altered) Details

01 2001.10.5 — —

*1 Section(s) with asterisk (*) refer to the previous edition when those were deleted.

This page is intentionally left blank.

C156-F046-01EN i

Preface

This document describes procedures for maintenance of the MDG3064UB/MDG3130UB

(DynaMO 640U2/1300U2), a 3.5-inch magneto-optical disk drive. The

MDG3064UB/MDG3130UB (referred to as "the product" hereafter) is provided with the

MCM3064UB/MCM3130UB 3.5-inch magneto-optical disk drive unit (referred to as "MO

drive" hereafter). The components are built in a case designed specifically for the product.

Refer to related manuals for operations other than maintenance and for explanation about

an MO drive.

The organization of this manual, related reference manual and conventions for alert

messages follow.

Overview of Manual

This manual consists of the following six chapters, glossary, and abbreviation:

Chapter 1 Overview

This chapter introduces the MDG3064UB/MDG3130UB MO disk drive. The chapter

describes the system features and outline of maintenance.

Chapter 2 Diagnosis and Maintenance

This chapter describes maintenance conditions, diagnosis methods, failure analysis

procedures, and system updating procedures of the MDG3064UB/MDG3130UB MO disk

drive.

Chapter 3 Troubleshooting

This chapter describes troubleshooting of a system connected to a Macintosh G3 and

Windows computer.

Chapter 4 Returning Repaired Unit

This section describes procedures for unpacking, packing, transporting, and storing the

MDG3064UB/MDG3130UB MO disk drive.

Chapter 5 Cleaning

Preface

ii C156-F046-01EN

CONVENTIONS USED INTHIS MANUAL

Conventions for Alert Messages

This manual uses the following conventions to show the alert messages. An alert message

consists of an alert signal and alert statements. The alert signal consists of an alert symbol

and a signal word or just a signal word.

The following are the alert signals and their meanings:

This indicates a hazardous situation likely to result in

serious personal injury if the user does not perform the

procedure correctly.

This indicates a hazardous situation could result in serious

personal injury if the user does not perform the procedure

correctly.

This indicates a hazardous situation could result in minor

or moderate personal injury if the user does not perform

the procedure correctly. This alert signal also indicates

that damages to the product or other property, may occur if

the user does not perform the product correctly.

This indicates information that could help the user use the

product more efficiently.

In the text, the alert signal is centered, followed below by the indented message. A wider

line space precedes and follows the alert message to show where the alert message begins

and ends. The following is an example:

Preface

C156-F046-01EN iii

(Example)

IMPORTANT

Fujitsu issues a Change Request/Notification regarding post-factory-shipment revision

number changes. When the user changes the version number, the revision-number label

should be updated as described above after the change is applied.The main alert messages

in the text are also listed in the “Important Alert Items.”

Attention

Please forward any comments you may have regarding this manual.

To make this manual easier for users to understand, opinions from readers are needed.

Please write your opinions or requests on the Comment at the back of this manual and

forward it to the address described in the sheet.

This page is intentionally left blank.

C156-F046-01EN v

Important Alert Items

Important Alert Messages

The important alert messages in this manual are as follows:

A hazardous situation could result in minor or moderate personal injury if the

user does not perform the procedure correctly. Also, damage to the product

or other property, may occur if the user does not perform the procedure

correctly.

Task Alert message Page

Normal Operation When cleaning the drive, do not use a toxic cleaning agent. 5-1

Normal Operation In case of contact, immediately flush eyes with water. 5-7

This page is intentionally left blank.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fujitsu Magazzinaggio

Fujitsu

Fujitsu ETERNUS DX Disk Manuale utente

Fujitsu

Fujitsu PG-HD2E4H Manuale utente

Fujitsu

Fujitsu ETERNUS Manuale di istruzioni

Fujitsu

Fujitsu ETERNUS DX S5 Series Guida all'installazione

Fujitsu

Fujitsu MAY2036RC Product/ Manuale utente

Fujitsu

Fujitsu MHV2040BH Manuale utente

Fujitsu

Fujitsu HARD DISK DRIVES MAW3073FC Manuale utente

Fujitsu

Fujitsu DynaMO 1300U2 Pocket Manuale utente

Fujitsu

Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS... Manuale utente

Fujitsu

Fujitsu GRANPOWER500 TEAMSERVER Series Manuale utente

Fujitsu

Fujitsu ETERNUS DX60 Manuale utente

Fujitsu

Fujitsu MHK2120AT - Mobile 12 GB Hard Drive Manuale utente

Fujitsu

Fujitsu RE25U300J Manuale utente

Fujitsu

Fujitsu ETERNUS AF S3 Series Istruzioni per il montaggio

Fujitsu

Fujitsu ETERNUS LT140 Manuale utente

Fujitsu

Fujitsu MAS3184NC/NP Manuale utente

Fujitsu

Fujitsu MBB2147RC SERIES Manuale utente

Fujitsu

Fujitsu Eternus DX80 S2 Manuale utente

Fujitsu

Fujitsu ETERNUS AF250 Manuale utente

Fujitsu

Fujitsu ETERNUS AF250 S2 Manuale tecnico

Fujitsu

Fujitsu MHV2160BT Manuale utente

Fujitsu

Fujitsu ETERNUS2000 200 Guida

Fujitsu

Fujitsu Eternus DX500 S3 Guida all'installazione

Fujitsu

Fujitsu eternus af Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente