FVC SP1106B Manuale utente
PROD
UCT I
MAGE
SP1106B
Sprinter Nudge Bar
Installation Guide
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
All Flatline Van Co products must be properly assembled and secured before attaching to your
vehicle. Improper attachment could result in an automobile accident, and could cause serious bodily
injury or death to you or to others involved. You are responsible for assembling and securing Flatline
Van Co products to your vehicle, checking the mounting points and attachments prior to use, and
regularly inspecting the products for wear and or damage. We always recommend you use a
professional to install any aftermarket accessories to your vehicle. If you have no mechanical
experience and are not thoroughly familiar with the installation procedures, you must have the
product installed by a professional installer or other qualified persons. The responsibility is yours
and must be taken seriously for everyone's safety.
1
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
thanks.
2
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
THANK YOU!
ARE YOU EXCITED ABOUT YOUR NEW NUDGE BAR? HERE ARE A FEW THINGS TO DO
BEFORE BEGINNING THE INSTALLATION PROCESS--
• PLEASE INSPECT THE PRODUCT TO ENSURE THERE WAS NO
DAMAGE INCURRED DURING SHIPPING.
• IF THERE IS DAMAGE TO REPORT, PLEASE CONTACT OUR
CUSTOMER SERVICE DEPARTMENT AS SOON AS POSSIBLE.
• NEXT, USING THE “PACKAGE CONTENTS” PAGE, CHECK
INVENTORY AND FAMILIARIZE YOURSELF WITH THE PARTS
AND HARDWARE.
• GATHER ALL TOOLS REQUIRED FOR INSTALL.
-13MM BOX WRENCH OR SOCKET
-5/32 ALLEN KEY
-T45 TORX KEY
ESTIMATED INSTALL TIME- 30 MIN
BLUE LOCTITE IS RECOMMENDED FOR THIS INSTALLATION.
TOOLS
5/32 ALLEN KEY
13MM WRENCH
PACKAGE CONTENTS
3
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
NUDGE BAR
QTY - 1
HARDWARE
4
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
1/4-20 X 0.75 FLANGED
BUTTON HEAD HEX DRIVE
SCREW
QTY - 2
M8-1.25 X 40 FLANGED HEX
HEAD SCREW
QTY - 2
M8 SCREW X 24 O.D.
OVERSIZED FLAT WASHER
QTY - 2
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
LET’S GET STARTED!
1. FIRST STEP IS TO REMOVE THE FACTORY BOLTS ON THE STEP PORTION OF
YOUR BUMPER. SOMETIMES THERE ARE PLASTIC CAPS INSTALLED, AND
THESE ARE EASILY REMOVED WITH A FLATHEAD SCREWDRIVER. THE BOLTS
THEMSELVES REQUIRE A T45 BIT TO REMOVE.
2. NEXT, SOME VANS COME EQUIPPED WITH THE EUROPEAN STYLE LICENSE
PLATE COVER, IF THIS IS THE CASE FOR YOU, IT WILL NEED TO BE REMOVED.
NOTE- WE HAVE SEEN SOME MOUNT THE NUDGE BAR WITHOUT
REMOVING THE EURO STYLE PLATE MOUNT, BUT IT CAN INTERFERE
WITH PARK SENSORS IF YOUR VEHICLE IS EQUIPPED WITH THEM.
5
EURO STYLE PLATE MOUNT US STYLE PLATE MOUNT
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576 6
3. NOW TAKE THE NUDGE BAR AND REST IT ON THE FRONT STEP AREA. LINE
UP THE MOUNTING SLOTS AND THREAD IN THE HARDWARE SHOWN BELOW.
THE LARGE WASHER GOES UNDERNEATH THE HEAD OF THE M8 BOLT.
THREAD THIS FINGER TIGHT.
NOTE- THIS IS A TWO HANDED OPERATION THAT IS NOT TOO TRICKY.
WE FIND IT BEST TO HOLD THE NUDGE BAR DOWN WITH ONE HAND
ON THE FRONT TUBE BY THE MOUNTING BRACKET AND USE YOUR
OTHER HAND TO THREAD THE BOLTS IN.
WE RECOMMEND APPLYING BLUE LOCTITE TO THE BOLTS BEFORE
INSERTING THEM.
4. NEXT, HOLD THE NUDGE BAR TIGHT AGAINST THE BUMPER AND ENSURE IT
IS CENTERED, THEN TIGHTEN THE HARDWARE.
NOTE- THERE ARE TWO HOLES BEHIND THE LICENSE PLATE
BRACKET FOR THE USE OF TWO SELF TAPPING SCREWS
(NOT INCLUDED) INTO THE BUMPER PLASTIC IF YOU SEE FIT. THIS
WILL KEEP THE BUMPER SNUG TO THE NUDGE BAR FOR AN EVEN
STURDIER INSTALLATION.
M8-1.25 X 40 FLANGED HEX
HEAD SCREW
M8 SCREW X 24 O.D.
OVERSIZED FLAT WASHER
SET IN PLACE AND THREAD IN HARDWARE
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576 7
3. IF YOUR VAN IS EQUIPPED WITH THE FRONT VIEW OR 360 CAMERA
PACKAGES; BELOW IS AN IMAGE OF WHAT YOUR FRONT VIEW CAMERA WILL
SHOW AFTER INSTALLING THE NUDGE BAR.
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576 8
GET OUT AND EXPLORE!
LEAVE US A REVIEW
Happy with your new FVC product? We would love to hear (and see) from you! Head to the product page and click "Leave
Review." Add a short review and upload a few photos to be showcased on the product page.
SHARE YOUR PHOTOS WITH US
We love seeing how our customers use their FVC products and following along with your adventures. Tag us in your photos
with @flatlinevanco or send them to us via email. We love posting customer pictures in our feed!
CUSTOMER SUPPORT
If you are having any issues with your product, please reach out, and we will make it right. FVC is a company of van and
outdoor enthusiasts that design and use our own products, so we want you to be as stoked on your new parts as we are!
thanks!
@flatlinevanco
facebook.com/flatlinevanco
youtube.com/c/flatlinevanco
support@flatlinevanco.com
Indice
Altri manuali FVC Accessori per automobili
FVC
FVC Low Pro Front Fairing Manuale utente
FVC
FVC Low Pro Roof Rack 170 Manuale utente
FVC
FVC TR1103B Manuale utente
FVC
FVC SP1104B Manuale utente
FVC
FVC TR1101B Manuale utente
FVC
FVC Sprinter Side Ladder Manuale utente
FVC
FVC SP0301B Manuale utente
FVC
FVC TR0109B Manuale utente
FVC
FVC Bed System Adventure Wagon Kit Flarespace Manuale utente
FVC
FVC TR0107B Manuale utente
FVC
FVC 24 Inch Upper Cabinet Manuale utente
FVC
FVC Sprinter Bed System Flarespace Manuale utente
FVC
FVC SP1001B Manuale utente
FVC
FVC TR0201B Manuale utente
FVC
FVC SPRINTER SP1123B Manuale utente
FVC
FVC SP0206B Manuale utente
FVC
FVC TR1105B Manuale utente
FVC
FVC Low Pro Roof Rack 148 HR Manuale utente
FVC
FVC SP0203B Manuale utente
FVC
FVC SP0105B Manuale utente
