Galaxy Digital HD Satellite Receiver Manuale utente
1
User’s Manual
Digital HD Satellite Receiver
Galaxy
2
PREFACE
1- OVERVIEW
1. WHAT IS THIS PRODUCT FOR? 3
2. WHAT FEATURE DOES THIS PRODUCT OFFER? 3
3. FOR YOUR SAFETY 4
4. PLEASE CHECK THE FOLLOWING ACCERSSORIES ARE ENCLOSED 4
5. HOW TO USE THE REMOTE CONTROL KEY 5
6.FRONTPANEL 6
7.REARPANEL 6
8. CONNECTION DIAGRAM 7
2- OPERATING
1.StartUp 8
2. Installation 8
3. Edit Channel 13
4. User Setup 16
5. System Tools 20
6.Game 22
7. HDD (PVR) 23
8.PVR 25
9. Channel List 27
10. Program Guide 28
11. Audio change 28
12. Multi Pictures 29
13. Recall the Favorite channel 29
3- SPECIFICATION
4- TROUBLE SHOOTING
3
1- OVERVIEW
1. WHAT IS THIS PRODUCT FOR?
This manual describes how to setup and operate Your STB.
Only qualified personnel should handle any problems beyond this manual.
This product is designed for using Digital Satellite and allows you to enjoy a lot of broadcasting whenever you want
to watch it anytime. By simply pressing the button of the remote control unit, the vivid picture and life –like sound of
digital broadcasting that your TV portrays through this product, allows you to watch whatever channel you wish of the
digital broadcasting.
Through this manual you will notice that the operation is easy to use.
This manual will help you get the most from this product and guide you through Installation, channel selection and
many other functions.
In case you experience any difficulties to use this product, please consult the relevant section of this manual.
From now on, enjoy digital broadcasting with digital satellite receiver!!!
2. WHAT FEATURE DOES THIS PRODUCT OFFER?
< General Features >
▪Full Compliant of MPEG Digital & DVB broadcasting
▪Standard Definition / High Definition contents ( MPEG2 and support MPEG4 AVC/H.264)
▪High Definition Video output : HDMI and Component(YPbPr)
▪Audio Decoding : ISO/IEC 13818-3(MPEG-2 audio/MUSICAM), Dolby AC-3
▪USB PVR ready ( File System(FAT16/FAT32/NTFS) , Format function, Recording, Playback, EPG Time record,
Time shifted recording)
▪USB 2.0 Interface - Firmware Update , Media Play, PVR Recording
▪Media Supporting : JPG( JEPG decoding accelerator), BMP, MP3 , OGG , WMA
▪Video output resolution : 576i, 576p , 720p, 1080i
▪User selectable output resolution
▪Integrated USB2.0 (Host), Support to USB Storage (HDD, Memory Stick)
▪10days EPG (Electronic Program Guide)
▪950-2150MHz Input Frequency (IF Loop Throughout)
▪Variable Input Symbol Rate (1-45Msps)
▪Multi Language OSD
▪Automatic PAL/NTSC Conversion
▪Fast Channel Change & Scan
▪5,000 Channel TV & Radio Program
▪Flexible reception of SCPC & MCPC from C/Ku-Band Satellites
▪Timer Function (Automatic Turn On/Off by Setting Function)
▪8 Bit Colors GUI(Graphic User Interface)
▪PIG (Picture In Graphic), Zoom function
4
▪8 Favorite Group List
▪Powerful Channel Editing Function
Sorting: Alphabetic, FTA/Scramble, Parental Lock and with default option
Move, Delete, Favorite Edit
Parental Lock, Channel Rename, Channel Skip
▪Manual PID/Satellite & TP/Network Scan
▪Blind Scan
▪Multi Satellite Scan – Simultaneous Scan with various Satellites
▪DiSEqC 1.0, 1.1, 1.2 & USALS Compatible
▪Comparable of Setting the Frequency for SMATV System
▪Software Upgrade via USB Storage or RS232C (Receiver to Receiver, PC to Receiver)
▪1 TVl SCART (Video, TV RGB out,Audio-L/R) ,1 VCR SCART(Video ,Audio L/R), HDMI , Composite Video/Audio ,
Componenet Video , S/PDIF(Optical) , Ethernet support
3. FOR YOUR SAFETY
▪Do not open the cover. It may cause malfunction or electric shock.
▪When you do not use the product for a long time, please pull the power cord out from the outlet.
Also do not use a damaged power cord that may cause fire or electric shock.
▪Do not use install the product in a humid area.
▪Do not cover the product or place anything heavy on the product, Keep clear space around the product for
sufficient ventilation.
▪Avoid using spray or liquid materials around the product. Don’t make other materials come into the inside the
product.
▪Do not connect to modify cables when the product is plugged in.
▪Socket-outlet shall be installed near the equipment and shall be easily accessible.
▪Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases
shall be placed on the apparatus.
4. PLEASE CHECK THE FOLLOWING ACCRSSORIES ARE ENCLOSED
▪User manual 1 set
▪Remote Control Unit 1 Set
▪Batteries (AAA Type) 2EA
▪A/V Cable (SCART to RCA), HDMI cable
Note !
If any of the accessories listed above are missing, Please contact the sales outlet where this product was initially
purchased.
5
5. HOW TO USE THE REMOTE CONTROL KEY
key Function
\
Turns the equipment on/off
Sounds Off/On
PAUSE Holds the picture or release the pause
INFO Shows detail channel information
AUDIO Selects audio mode, Select audio language
LAST Returns to previous program
MENU Enters main menu screen. Or exits menu screen
EXIT Moves to upper menu
Execute page down function in the menu
Execute page up function in the menu
FIND Find Channel
EPG Shows program information
FAV Enter favorite program or Exit from Favorite Program
SAT Enter programmed satellite list
SIG Shows signal / quality level
TIME Shows current Time , setting Time
Fast rewind recorded file while playing
Fast forward recorded file while playing
Plays recorded pvr file
Stop recording or playing
Slow rewind recorded file while playing
Slow forward recorded file while playing
Pause recorded file while playing
Starts a direct recording
HDD Enter Hard Disk (Record) menu
PVRi Information about PVR
ZOOM Zoom Screen
SLEEP Sleep timer
TTX Teletext Fucntcion
SubT Subtitile Function
V.MODE Current video out resolution and change
OK Shows Channel list. Confirms selection
TV/RADIO Toggles between TV and Radio operation
Change the value of a selected line, volume up/down
6
6. FRONT PANEL
No Name Fuction
1 CH DOWN To move down in menus, To change channels
2 POWER To Put Power in and out of standby
3 CH UP To move up in menus, To change channels
4 DISPLAY Display Segment LED
5 IR IR Receiver
6 USB Connection USB Port ( switch Front/Rear )
7 SMART CARD Smart Card Slot
7. REAR PANEL
No Name Function
1 IF Input / Output IF INPUT From LNB to receiver / IF Loop-through output to 2nd receiver
2 Scart VCR Scart / TV Scart (Video, RGB Signal output.)
3 S/PDIF For Digital Audio Output
4 HDMI HDMI Digital Video/Audio Output
5 USB Connection USB Port ( switch Front/Rear )
6 RS232 Serial port used for software upgrade
7 VIDEO / AUDIO Composite Video Output / Left-Right Audio Output
8 COMPONENT VIDEO Component Video Output ( Y , Pb, Pr )
9 POWER Power switch
7
8. CONNECTION DIAGRAM
Connect the cable from the satellite dish to the LNB Input socket on the receiver.
The SCART connect the TV set.
8
2 - OPERATING
1. Start Up
Please follow the brief procedure below and watch the satellite programs.
Select the User Setup and confirm Language
Select the Installation and antenna setup
Adjust LNB configuration per each satellite
Execute scanning to find program
Exit from installation after all programs are searched.
Language
When the receiver is turned on for the first time, main menu is appeared as below photo.
You can find desired menu by using◀▶▲▼key and select desired menu by press [OK] key.
Select the user setup and press [OK] or ▶to enter Language menu as below photo and can select the desired
language by using ◀▶or [OK] key to confirm it.
* This Receiver supports 11 languages.
English, French, German, Italian, Spanish, Portuguese, Russian, Turkish, Polish, Arabic and Persian.
2. Installation
Press the [OK] or ▶key to enter Installation menu as below photo. Press the [OK] key on Antenna setup menu and
it is appeared on screen as below second photo.
2.1 Antenna Connection ( This can be adopted by Two Tuner Model)
You can fix “Antenna Connection Type” through ◀▶Keys.
9
2.2 Satellite List
When you enter to Satellite List menu, there will display the screen.
• Press [Red] key to enter Edit Satellite where you can
edit Satellite name and longitude
• Press [Green key to enter Add Satellite menu
• Press [Blue] key, you will be asked “Are you sure to
delete?”. Select “yes” to delete the Satellite that
highlight focus on. Select “No” to cancel the operation
10
2.3 Antenna Setup
In this section you could know how to operate Antenna Setup.
2.3.1 Tuner
Press ◀▶keys to fix Tuner LNB1 or LNB2.
2.3.2 Satellite
Press ◀▶keys to fix Satellite or [OK] key to select Satellite list.
2.3.3 LNB Frequency
Select LNB type using ◀▶keys and ▲▼ keys. And confirm it by [OK] key.
Option is 5150 / 5750 / 5950 / 9750 / 10000 / 10050 / 10450 / 10600 / 10700 / 10750 / 11250 / 11300 / 5150-5750 /
5750-5150 / Universal (9750-10600)
2.3.4 Transponder
Select a specific transponder by using ◀▶keys or [OK] key and confirm it by [OK] key.
2.3.5 DiSEqC 1.0 or 1.1
Select a specific setting for DiSEqC 1.0 or 1.1 by using ◀▶keys or [OK] key and confirm it by [OK] key.
Option is Disable / LNB1 / LNB2 / LNB3 / LNB4 at DiSEqC 1.0.
Option is Disable / LBN1 to LNB16 at DiSEqC 1.1.
2.3.6 22Khz
In case you are using a Dual LNB or two antennas connected to a 22KHz tone switch box, make 22KHz tone switch
“ON” or “OFF” to select a LNB or an antenna.
2.3.7 Polarity
Select Polarity
2.3.8 Motor DiSEqC
It is used to set the DiSEqC 1.2 motor & USALS
If you have no positioner equipment, select “Disable”.
Indice
Altri manuali Galaxy Ricevitore
