Gantom JUNI DMX GP285 Manuale utente

Gantom Juni DMX User Guide Version 1.0 –3/25/2021

GANTOM JUNI DMX USER GUIDE

At less than 130mm (5 inches) in length, the Juni is the smallest framing projector on the market.

Gantom has responded to overwhelming demand from top lighting designers around the world to

produce a compact and versatile fixture that can disappear into the environment. Gantom's Juni

features 25-40 degree optics with framing shutters in a DMX fixture the size of a salt shaker! With it's

hyper-efficient optical and cooling systems, the Juni delivers crisp and clean illumination from a fixture

less than half the size of its competition.

The Juni has a black anodized aluminum finish, with silver available by custom quotation. It is available

in a non-dimming version or a DMX controlled version. There are 3 available mounting options: screw-

mount yoke, recessed canopy, and track mounting.

Features

oUltra-compact design < 130mm (5 inches) long

oClass 2, low-voltage 12-24VDC input (DO NOT HOT PLUG)

o25-40° beam angle with adjustable zoom and focus lenses

o3000K 90CRI LED source

oTri-plane shutter system

oAccepts 19mm steel or glass gobo (up to 2mm thick)

oNon-dimming and DMX dimming options

oMachined aluminum body in silver or black finishes

oTrack adapter and canopy mount available

Available Models:

Item Number

Item Description

GP285

Gantom Juni DMX - Cool White - Black Finish - Pro Cable Connector

GP286

Gantom Juni DMX –Warm White - Black Finish - Pro Cable Connector

TL285

Gantom Juni DMX - Cool White - Black Finish –Eutrac Low Voltage Adapter

TL286

Gantom Juni DMX –Warm White - Black Finish - Eutrac Low Voltage Adapter

Gantom Juni DMX User Guide Version 1.0 –3/25/2021

POWER AND WIRING REQUIREMENTS

The Gantom Juni DMX has a maximum wattage of 11W and an operating voltage range of 12-24VDC.

The Gantom Juni DMX includes a single locking connector which combines both power and data into

one compact cable. This connector is compatible with our Gantom Pro Cable System, including our G8

Power/Data Distribution Box. A single cable for power and data greatly simplifies installation and the

locking connector gives a secure connection for long term use. This makes the Gantom Pro Cable

System ideal for permanent installations. For more information on this system, please visit

https://www.gantom.com/accessories/gantom-pro-cable/

Note: all fixtures must be installed with the low voltage supply power OFF. Hot

plugging (connecting to a live power supply) is not supported.

Hot plugging a fixture into a system with a running power supply will increase the load on the power

supply, which can generate voltage spikes that more than double of the standard input voltage. This

causes an out-of-spec and out-of-warranty voltage condition which may result in damage to the fixture.

While Gantom fixtures have internal protections against voltage spikes, it is recommended that

installers handle them with care to prevent these spikes from happening in the first place.

Installing all fixtures in the system before turning on power to the low voltage

power supply assures that the power supply has a “soft start” which is free from

harmful voltage spikes.

BARE WIRE PINOUT

Power

RED

BLUE

DMX signal

D+

GREEN

D-

YELLOW

COM

BLACK

Gantom Juni DMX User Guide Version 1.0 –3/25/2021

Safety and Operation notes:

Please carefully review the following safety notes regarding the Gantom Juni micro gobo projector.

These notes are important for safe installation and usage of the product.

Do not look directly at the light source while the fixture is powered on.

Inspect all power cables for damage or crimped cable before use.

Make sure that your circuit is properly grounded and all electrical safety precautions have been

taken to prevent electric shock.

Be aware that the fixture will become HOT to the touch when it is left on.

Allow several minutes for the light to cool before touching it after extended periods of on time.

Ensure that there are no flammable materials close to or in contact with the light fixture.

Never touch the lenses within the fixtures. If the lenses must be cleaned, use a microfiber cloth

and glasses cleaning solution.

Make sure that the locking cable connectors are fully tightened when the product is installed.

Check the voltage of the power line before connecting the fixture to ensure that it is within the

required range for the fixture.

In the event of a serious operating problem, cut power to the fixture and cease operation

immediately.

For technical support, please contact [email protected]om or call 1-855-GANTOM1 (1-855-

426-8661).

MOUNTING INSTRUCTIONS

The Gantom Juni micro framing projector comes with an aluminum mounting yoke pre-installed. It is

meant to be used with ¼” size hardware, but please note that mounting hardware is not included with

the fixture. The yoke has a center hole (1) and a curved slot (2). Install a screw in the center hole first,

then loosely screw down a second screw through the curved slot. Rotate the fixture to the appropriate

angle and then finally tighten down both screws all the way to lock the fixture in place.

Gantom Juni DMX User Guide Version 1.0 –3/25/2021

AIMING INSTRUCTIONS

Once the fixture has been mounted, you can complete the aiming of the fixture. The fixture is adjustable

in the following ways:

When you have the light pointed in the correct orientation, tighten the locking screws in the indicated

locations.

Gantom Juni DMX User Guide Version 1.0 –3/25/2021

FOCAL ADJUSTMENT

First, loosen the three set screws on the lens tube cover and remove the lens tube cover.

Power on the fixture. Be sure to never look directly at the LED while the fixture is on.

Now, move the primary optic as close to the LED as possible and the secondary optic as far from the LED

as possible on the optic slider rails. Slowly begin sliding the secondary optic toward the LED until the

projected image comes into focus. This will be the narrowest focused beam the fixture can achieve.

To widen the beam move the primary optic forward about 1 mm, and then move the secondary object

backward along the optic slider rails toward the LED until the beam comes back into focus. Repeat this

process until you have your desired projection size. At the maximum beam size, the primary and

secondary optics will be touching each other at about 1/3rd of the length of the optic slider rails.

When you have finished focusing the lenses, replace the lens tube cover and tighten the set screws back

down to hold the lens tube in place.

Gantom Juni DMX User Guide Version 1.0 –3/25/2021

GOBO INSTALLATION

A gobo can be a great way to add texture and dimension to your application. The Gantom Juni DMX

micro framing projector accepts glass and stainless steel gobos with an outer diameter of 19mm. The

maximum image size for patterns is 15mm and the maximum image size for text is 10mm. Both stainless

steel and full color glass gobos are available to fit the Gantom Juni DMX. Custom stainless steel and full

color glass gobos are available through Rosco. Please see http://www.rosco.com/gobos/ for more

information on how you can order your own.

To install a gobo slide, first make sure that your fixture is powered off. Loosen the three set screws on

the lens tube cover and remove the lens tube cover.

Next, remove the lens tube by unscrewing it from the fixture.

Gantom Juni DMX User Guide Version 1.0 –3/25/2021

Unscrew the gobo retainer from the gobo holder ring.

Insert your gobo slide into the gobo retention hole, it should rest easily on a ledge that is inside the hole.

Next, screw the gobo retention ring back into the hole until it is firmly seated and holding the gobo in

place.

Once the gobo is in place within the retainer system, reattach the lens tube, focus your optics to your

desired effect, then reattach the lens tube cover.

Gantom Juni DMX User Guide Version 1.0 –3/25/2021

SHUTTER ADJUSTMENT AND LOCKING

The Gantom Juni DMX features 4 independently adjustable framing shutters which are perfect for

creating rectangles, triangle, trapezoids, slits, or irregular shapes for selective lighting. This gives you the

ability to add a crisp angular edge to your beam. This feature is perfect for highlighting a table or piece

of art with minimal light spill.

With the light powered on, use the handles to adjust the placement of the shutters. Note that the side

which is being adjusted will be mirrored and inverted on the light output. This means that when you

adjust the shutter on the RIGHT side of the fixture, the image will be adjusted on the LEFT side. When

you adjust the shutter on the TOP side of the fixture, the image will be adjusted on the BOTTOM side.

Once the shutters are adjusted, you can lock them in place by tightening one of the highlighted set

screws. Note that there are 3 set screws around the fixture, but only one needs to be tightened to lock

the shutters in place.

Gantom Juni DMX User Guide Version 1.0 –3/25/2021

INSTALLING ACCESSORIES

The Gantom Juni DMX has a retention ring on the front for holding a polycarbonate lens shield, an

angled cutaway snoot, or a top hat accessory for shielding the light source from view is available for the

Gantom Juni (FA38 –fixture accessory pack).

Installing the accessory: An accessory can be installed by first unscrewing the front retaining ring shown

below.

Once the retaining ring is removed, the accessory can be inserted. Place the accessory in the desired

orientation, then tighten down the retaining ring.

Gantom Juni DMX User Guide Version 1.0 –3/25/2021

CONFIGURING THE GANTOM JUNI DMX

Due to its compact size, the Gantom Juni DMX cannot use a physical

DIP switch for addressing. Instead, the Gantom Juni DMX is

programmed using the DMX Programmer App by Gantom or by using

the DarkBox Programmer V2 programming device (part# DB32,

pictured right). In addition to setting the DMX starting address for the

fixture, this will allow you to save a default color and brightness for the

fixture if the application does not require any DMX control.

Configuring light fixtures with the DarkBox Programmer V2 Device:

For details on how to configure your fixture using the DarkBox

Programmer V2, please consult the user guide for that product. The

DarkBox Programmer V2 device is the easiest and most reliable way to

configure Gantom fixtures and is the preferred option when available.

Configuring the light fixture with the DMX Programmer App:

When the DarkBox Programmer V2 standalone programming device is unavailable, it is also possible to

configure the settings of the device using our free app for iOS and Android devices.

What you need:

oA CB107 Pro Cable Programming Adapter

oAn Android or iOS device for running the Gantom Programmer app. Please note that a

headphone port is required to connect to the device to the fixture. The iPhone7 does work

with, but you will need to use the headphone port adapter that is included with the phone.

oA male-to-male 3.5mm audio 3.5mm cable. This is the same type of cable that you would use to

connect your Android or iOS device to headphones or to an AUX port.

oPower supply for the fixture. All Gantom fixtures accept 12v DC power. We recommend using

one of our PowerPak Mini units if you are just going to power a single fixture.

oThe free DMX Programmer app by Gantom. This can be found by searching “Gantom” in iTunes

for an Apple device or Google Play for an Android device

First, open the DMX Programmer app by Gantom. The app will open to the screen you see here.

From this screen, select Generic Console. (note: a Gantom Juni DMX menu option

may be added to the app at a later date)

The app will then provide you instructions on how to connect the light fixture to

the tablet or smartphone. Please note the order in which the cables should be

connected. First connect the headphone cable to the light fixture and to the

tablet/smartphone. Next, connect the power to the fixture. When prompted by

the app, tap the “Next” button and you will be taken to the control screen.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Gantom Proiettore

Gantom

Gantom iQ Manuale utente

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Toshiba

Toshiba TLP-791U Manuale utente

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

InFocus

InFocus LitePro 560 Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente