Gardena 1739 Manuale utente

DGebrauchsanweisung

Elektronischer Druckschalter

GB Operating Instructions

Electronic Pressure Switch

FMode d’emploi

Interrupteur manométrique électronique

NL Gebruiksaanwijzing

Elektronische drukschakelaar

SBruksanvisning

Elektronisk tryckströmställare

IIstruzioni per l’uso

Pressostato elettronico

EManual de instrucciones

Interruptor electrónico de presión

PInstruções de utilização

Interruptor electrónico de pressão

DK Brugsanvisning

Elektronisk manometer

Art. 1739

DGBFNLS

www.devicemanuals.eu

Warning! Electric shock!

Risk of injury due to electric shock.

➔Always unplug your Garden Pump before

filling, after operation, when trouble-

shooting and before carrying out any

maintenance work.

Location

Warning: Using a pump converted with the elec-

tronic pressure switch on swimming pools, gar-

den ponds and similar locations is only permis-

2. For Your Safety

Please read the Instructions for Use carefully and follow the

instructions contained in them. Get to know the Electronic

Pressure Switch, its correct use and the safety instructions with

the assistance of these Instructions for Use.

For safety reasons, children and young persons under the age of

16 and people who have not read these Instructions for Use

should not use this Electronic Pressure Switch.

➔Please keep these instructions in a safe place.

Contens 1. Area of Application of Your GARDENA

Electronic Pressure Switch . . . . . . . . . . . . . . . . . . . . . . . . 10

2. For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3. Function and Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4. Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5. Putting into operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

6. Operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

7. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

8. Trouble-Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

9. After Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

10. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

11. Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

12. Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

1. Area of Application of Your GARDENA Electronic

Pressure Switch

Intended use The GARDENA Electronic Pressure Switch is used for converting

garden pumps into automatic domestic water system for private

use in domestic gardens and allotments.

Please note The pump used must reach a pressure of at least 2.5 bar at

the intake for the Electronic Pressure Switch.

GARDENA Electronic Pressure Switch

Welcome to the Garden of GARDENA ...

sible if the pump is operated via a fault current

circuit-breaker (FI-switch) (DIN VDE 0100-702

and 0100-738). In addition, the pump must be

set up so that it is stable and cannot be flooded

and must be protected to prevent it falling. An

approved RCD powerbreaker can be used as an

additional safety device.

➔Please ask your electrician for his advice.

Take care that the site is firm and solid, in order

to ensure safe location of the pump.

➔Locate the pump at safe distance of the

liquid.

www.devicemanuals.eu

Extension cables

The Electronic Pressure Switch may only be

operated with 230 V / 50 Hz.

➔ Note mains voltage.

Pursuant to DIN VDE 0620, power cable as

well as extension cables must not have a

smaller diameter than rubber sheathed cables

described with letter symbols H07 RNF.

➔

Ensure that the plug and socket connections

are arranged in an area which cannot flood.

In Austria

In Austria, the electrical connections must be

made according to ÖVE-EM 42, T2 (2000)/1979

§ 22 based on § 2022. Pursuant to this regula-

tion it’s imperative to operate pumps for swim-

ming pools and garden ponds exclusively via

an isolating transformer.

➔Please ask your electrician.

In Switzerland

In Switzerland mobile appliances which are

used outdoors, must be connected via a resi-

dual-current device.

Visual check

➔ Always inspect before use to ensure that the

equipment, especially the plug and the

cable, are not damaged.

A damaged unit must not be used.

➔ If damaged, have the Electronic Pressure

Switch checked by GARDENA Service or an

authorised electrician.

3. Function and Display

The Electronic Manometric Switch is equipped with an electronic

control unit with fixed programs. The electronic control unit is acti-

vated by pulses from the manometric switch and the flow recogni-

tion of the dry-running safety feature.

The manometric switch is set at the factory to a switching pressu-

re of approx. 2.2 bar. This setting cannot be changed. The dry-

running safety mechanism protects the pump against damage and

controls the time the pump continues to run against the closed

delivery side.

Explanation of terms

Normal operation

The pump has reached the maximum pump pressure and switches

off automatically.

Suction cycle The pump attempts to resume normal operation after 4 minutes.

Automatic After a fault, the pump’s electronic control unit makes three auto-

self-priming mode matic self-priming attempts at different time intervals (after 1 hour,

(yellow ALARM LED flashes) after 5 hours and after 20 hours) to restore normal operation. The

priming cycle (see above) is used for each of these attempts.

RESET key: You can switch the pump on again prematurely at any time by

pressing the RESET key. If the warning LED is flashing, however,

the pump can only be turned on again by unplugging the mains

plug and then plugging the plug back in again.

Electronic control display

RESET key:

Resets the pump after a fault occurs.

Red POWER LED:

Indicates that the pump is connected to the mains power supply.

Green Pump ON LED:

Indicates that the pump is pumping.

Yellow ALARM (No Water) LED:

Indicates a fault.









www.devicemanuals.eu

Operating states

Red POWER LED is on The pump is operating in the normal operating mode.

Green Pump ON LED The pump is pumping.

Once the pump has reached the max pump

is on pressure, the pump switches off (the green Pump ON LED

extin-

guishes) and the pump functions in the normal operating mode

Green Pump ON LED The delivery rate is too low at the delivery side (less than 90 l / h).

flashes slowly (1 x per second.)

The pump continues to pump for a moment then switches off. The

pump switches on again as soon as the pressure reaches the

switching pressure of approx. 2.2 bar (e.g. if there is a leak) - or-

the pump is about to switch off after you have finished drawing off

water.

Green Pump ON LED The flow rate on the inlet side is too low (below 300 l / h).

lashes quickly (4 x per second.)

The pump continues to run for approx. 40 seconds. If normal ope-

ration is not achieved during this time, the pump switches off and

the control unit changes to the “automatic selfpriming mode”.

Yellow ALARM LED The amount of water is too low when restarting the pump.

flashes slowly (1 x per second.)

The pump runs through the first “priming cycle”. If the normal

operating mode is not achieved, the pump switches off and the

control unit changes to the “automatic selfpriming mode”.

Yellow ALARM LED Alarm which indicates if the amount of water is too low when the

lashes quickly (4 x per second.)

pump is operating in the normal mode. The control unit changes

to the “automatic self-priming mode”.

Yellow ALARM LED is on The “automatic self-priming mode” is no longer active and the

unit is no longer supplying water (e.g. no water in the container or

borse or the filter is dirty).

Green Pump ON LED and Warning: There is a leak in the pipe system. The pump switches

yellow ALARM LED flash on and off because of a leak. If the pump switches on and off

alternately more than 7 times within 2 minutes, the control unit issues a war-

ning via flashing LEDs and the motor switches itself off.

4. Assembly

Fit pressure switch The Electronic Pressure Switch provided with a 33.3 mm (G 1)

on the pump: external thread on the input side .

1. For GARDENA pumps: art.1422/1429/1432/1434/1438/1442

screw adapter on to the pump and screw sealing cap on

the side pressure connection.

2. Place pressure switch on the pump.

3. Hold the pressure switch with

one hand and screw the lower

rotating part into the pump

as far as the stop.

4. When you reach the stop, turn

the non-return valve anti-

clockwise (max. 1 turn) to the

position required.

5. Plug mains plug of the pump

into the socket of the pressu-

re switch



(behind the display).

















www.devicemanuals.eu

5. Putting into operation

Connect the hose to the

Don’t use any hose connection system fittings on the suction side!

suction side: A vacuum-resistant suction hose must be used

• e.g. GARDENA Suction Unit, Art. no. 1411.

To shorten the time required for suction to start again, we recom-

mend the use e.g. of the GARDENA suction filter with backflow

preventer, Art. 1728, combined with the GARDENA suction hose,

Art. 1412, which prevents the suction hose emptying automatical-

ly when the automatic domestic water systems are shut down.

➔ Remove the flat gasket of the suction hose and replace it with

the dirt filter provided.

Alternatively, you can also use the GARDENA Pump

Preliminary Filter, Art. no. 1730/1731.

It is important to filter the water to prevent contaminating the

manometric switch.

Connect the hose to the The 33.3 mm (G1) inner thread at the outlet of the Electronic

delivery side: Manometric Switch can be modified if necessary to an outer thre-

ad by using the GARDENA Pump Fitting, Art. No. 1745, which

can be fitted to the GARDENA Water Hose Connection System.

For pumps fitted with an horizontal 33.3 mm (G 1) outer thread we

recommend the use of the GARDENA Brass Angle with inner thre-

ad, Art. No. 7281. The connections have to be sealed with com-

mercial agents.

6. Operation

Switch on Electronic Warning ! Electric shock !

Pressure Switch: Risk of injury due to electric shock.

➔Disconnect the Electronic Pressure Switch from

the mains before filling it.

1. Turn rotary switch of the non-return valve to position 2.

(valve opened).

2. Open filler pipe of pump (to vent it).

3. Fill with liquid to be pumped via the outlet pipe until it

reaches the overflow.

4. Open any shut-off devices in the delivery line (watering acces-

sories, water stop, etc.) so that air can escape before the pri-

ming procedure begins.

5. Drain remaining water in pressure hose so that air can escape

during the suction process.

The mains plug of the pump must be plugged into the

manometric switch!

6. Switch ON/OFF switch of pump (if present) to "ON".

Plug the pump into a 230 V/50 Hz alternating current socket



Warning: The pump will start immediately!

8. When the pump has begun pumping, turn the rotary switch 

of the return valve to position 1 (normal operating mode).

➔If the pump does not deliver liquid after 7 minutes,

unplug the manometric switch (see “8. Trouble

Shooting“).









www.devicemanuals.eu

It is advantageous to fill the suction hose as well if the pump has

to overcome a large self-priming suction height, or if the suction

hose has a diameter ≥1” (25.4 mm).

7. Maintenance

Warning ! Electric shock !

Risk of injury due to electric shock.

➔Disconnect the Electronic Pressure Switch from

the mains before undertaking any maintenance.

1. Reduce the pressure (e. g. by opening a valve).

Loosen the pressure hose and fill the manometric switch  with

water containing vinegar or a household decalcifying product.

3. Rinse the manometric switch



thoroughly after decalcifying.

8. Trouble Shooting

Warning ! Electric shock !

Risk of injury due to electric shock.

➔Disconnect the Electronic Pressure Switch from the mains

before undertaking any work to rectify faults.

Problem

Warning flashing

(green Pump ON LED and yellow

ALARM LED flash alternately)

➔See 3. Function and Display

Pump switches on and off

continuously if liquid is drawn

at a rate greater than 400 l / h.

Probable cause

Faulty or leaking back-flow pre-

venter at the end of the

suction hose

Pump and suction hose are not

filled up with the liquid to be

pumped

Backflow valve switch set to

position 2 and was not set to

position 1 once the pump

began pumping

Suction hose end is not sub-

merged into the liquid

Outlet too low

Suction hose or connections are

not water-tight

Suction filter clogged

Air cannot escape on delivery

side since release points are

closed etc.

Delivery pipe or consumer are

not water-tight

Dirt has collected on the

manometric switch.

Remedy

Unplug the manometric switch.

2. Rectify the fault.

3. Plug the manometric switch

back in again.

Shouldn’t the pump start prim-

ing, although you have repeat-

edly pressed the RESET button,

please contact one of our

GARDENA Service Centres

(addresses you will find on the

rear side).

1. Remove manometric switch

from pump.

Return valve set to position 2.

3. Rinse manometric switch.

Decalcifying the electronic

manometric switch:



www.devicemanuals.eu

Pump doesn’t start or

suddenly stops during

operation.

Pump constantly cuts in and

out without drawing water.

Note: Even the smallest leak

(loss of a few mls) can cause the

pressure in the pump to drop.

The cause of this is often small

leaks at taps and toilet flushing

cisterns.

Pump does cut out.

Pump doesn’t start working.

No power.

Electronic Manometric Switch

calcified.

Leak on the pressure side.

There being deposits of dirt in in

Electronic Manometric Switch.

Rotary switch / non-return valve

is set to position 2.

Non-return valve of the

Electronic Manometric Switch is

blocked.

Larger leaks on the pressure

side.

Outlet end (e.g. water accesso-

ry)is closed. There is sufficient

water pressure in the pressure

line.

➔Check fuses an electric

connections.

➔Decalcify the Electronic

Manometric Switch.

1. Check the pressure line and

connected consumers for

leaks.

2. The non-return valve shall be

at position 1 when localising

faults.

Loosen the Electronic Mano-

metric Switch from the pump.

2. Turn the non-return valve to

position 2.

3. Clean the non-return valve,

e.g. by flushing in the direc-

tion of flow.

➔Set the rotary switch to

position 1.

➔Clean the non-return valve,

e.g. by flushing in the

direction of flow.

➔Rectify leaks.

➔Open the outlet end.

In addition to this, please observe the notes on use given in the operating instructions for the

applicable garden pump.

If you have any other problem with your Garden Pump, please contact our Customer Service.

9. After Operation

Wintering / Storage ➔ Drain the pump and the Electronic Manometric Switch before

the frost period sets in. Store them protected from frost.

10. Accessories

GARDENA Suction Filter To equip suction hoses with Backflow •

Art. no. 1726/1727/1728

Preventer sold by the metre.

GARDENA Recommended for pumping • Art. no. 1730 / 1731

Pump Preliminary Filter sandy liquids.

GARDENA For vacuum-resistant connection of • Art. no. 1729

Bore Hole Suction Hose the pump to boreholes or pipe net-

works. Length 0.5 m. With 33.3 mm

(G1) female thread at both ends.

www.devicemanuals.eu

11. Technical Data

Typ Art. 1739

Cut-in pressure after pressure drop 2,2 ± 0,2 bar

Max. pressure 6 bar

Max. rate of flow 8400 l/h

Min. flow regulated at pressure side 90 l/h

Min. flow regulated at suction side 300 l/h

Max. ambient temperature 35 °C

Voltage/Frequency 230 V AC / 50 Hz

Max. current 8 A

Degree of protection/Protection class IP 44 / I

12. Service

Warranty GARDENA guarantees this product for 2 years (from date of

purchase).

This guarantee covers all serious defects of the unit that can be

proved to be material or manufacturing faults. Under warranty we

will either replace the unit or repair it free of charge if the following

conditions apply:

• The unit must have been handled properly and in keeping with

the requirements of the operating instructions.

• Neither the purchaser or a non-authorised third party have

attempted to repair the unit.

This manufacturer’s guarantee does not affect the user’s existing

warranty claims against the dealer/seller.

If a fault occurs with your Garden Pump, please return the faulty

unit together with a copy of the receipt and a description of the

fault, with postage paid to one of the GARDENA Service Centres

listed on the back of these operating instructions.

www.devicemanuals.eu

Produkthaftung Wir weisen ausdrücklich darauf hin, dass wir nach dem Produkthaftungs-

gesetz nicht für durch unsere Geräte hervorgerufene Schäden einzustehen

haben, sofern diese durch unsachgemäße Reparatur verursacht oder bei

einem Teileaustausch nicht unsere originale GARDENA Teile oder von uns

freigegebene Teile verwendet wurden und die Reparatur nicht vom

GARDENA Service oder dem autorisierten Fachmann durchgeführt wird.

Entsprechendes gilt für Ergänzungsteile und Zubehör.

Product Liability We expressly point out that, in accordance with the product liability law,

we are not liable for any damage caused by our units if it is due to im-

proper repair or if parts exchanged are not original GARDENA parts

or parts approved by us, and, if the repairs were not carried out by a

GARDENA Service Centre or an authorised specialist. The same applies

to spare parts and accessories.

Responsabilité Nous vous signalons expressément que GARDENA n’est pas respon-

sable des dommages causés par ses appareils, dans la mesure où ces

dommages seraient causés suite à une réparation non conforme, dans la

mesure où, lors d’un échange de pièces, les pièces d’origine GARDENA

n’auraient pas été utilisées, ou si la réparation n’a pas été effectuée par

le Service Après-Vente GARDENA ou l’un des Centres SAV agréés

GARDENA. Ceci est également valable pour tout ajout de pièces et

d’accessoires autres que ceux préconisés par GARDENA.

Productaansprakelijkheid Wij wijzen er nadrukkelijk op, dat wij op grond van de wet aansprakelijk-

heid voor producten niet aansprakelijk zijn voor schade ontstaan door onze

apparaten, indien deze door onvakkundige reparatie veroorzaakt zijn, of er

bij het uitwisselen van onderdelen geen gebruik gemaakt werd van onze

originele GARDENA onderdelen of door ons vrijgegeven onderdelen en de

reparatie niet door de GARDENA technische dienst of de bevoegde vak-

man uitgevoerd werd. Ditzelfde geldt voor extra-onderdelen en accessoires.

Produktansvar Tillverkaren är inte ansvarig för skada som orsakats av produkten om

skadan beror på att produkten har reparerats felaktigt eller om, vid repa-

ration eller utbyte, andra än Original GARDENA reservdelar har använts.

Samma sak gäller för kompletteringsdelar och tillbehör.

Responsabilità Si rende espressamente noto che, conformemente alla legislazione sulla

del prodotto responsabilità del prodotto, non si risponde di danni causati da nostri arti-

coli se originati da riparazioni eseguite non correttamente o da sostituzioni

di parti effettuate con materiale non originale GARDENA o comunque da

noi non approvato e, in ogni caso, qualora l’intervento non venga eseguito

da un centro assistenza GARDENA o da personale specializzato autoriz-

zato. Lo stesso vale per le parti complementari e gli accessori.

Responsabilidad Advertimos que conforme a la ley de responsabilidad de productos no nos

de productos responsabilizamos de daños causados por nuestros aparatos, siempre y

cuando dichos daños hayan sido originados por arreglos o reparaciones

indebidas, por recambios con piezas que no sean piezas originales

GARDENA o bien piezas no autorizadas por nosotros, así como en aquellos

casos en que la reparación no haya sido efectuada por un Servicio Téc-

nico GARDENA o por un técnico autorizado. Lo mismo es aplicable para

las piezas complementarias y accesorios.

Responsabilidade Queremos salientar que segundo a lei da responsabilidade do fabricante,

sobre o produto nós não nos responsabilizaremos por danos causados pelo nosso equipa-

mento, quando estes ocorram em decorrência de reparações inadequadas

ou da substituição de peças por peças não originais da GARDENA, ou pe-

ças não autorizadas. A responsabilidade tornar-se-à nula também depois

de reparações realizadas por oficinas não autorizadas pela GARDENA.

Esta restrição valerá também para peças adicionais e acessórios.

Produktansvar Vi gør udtrykkeligt opmærksom på at i henhold til produktansvarsloven

er vi ikke ansvarlige for skader forårsaget af vores udstyr, hvis det er på

grund af uautoriserede reparationer eller hvis dele er skiftet ud og der ikke

er anvendt originale GARDENA dele eller dele godkendt af os, eller hvis

reparationerne ikke er udført af GARDENA-service eller en autoriseret

fagmand. Det samme gælder for ekstra udstyr og tilbehør.

www.devicemanuals.eu

EU-Konformitätserklärung

MaschinenVerordnung (9. GSGVO) / EMVG / Niedersp. RL

Der Unterzeichnete GARDENA Kress + Kastner GmbH · Hans-Lorenser-Straße

40 · D-89079 Ulm bestätigt, dass die nachfolgend bezeichneten Geräte in der

von uns in Verkehr gebrachten Ausführung die Anforderungen der harmonisier-

ten EU-Richtlinien, EU-Sicherheitsstandards und produktspezifischen Standards

erfüllen. Bei einer nicht mit uns abgestimmten Änderung der Geräte verliert

diese Erklärung ihre Gültigkeit.

EU Certificate of Conformity

The undersigned GARDENA Kress + Kastner GmbH · Hans-Lorenser-Str. 40 ·

D-89079 Ulm hereby certifies that, when leaving our factory, the units indica-

ted below are in accordance with the harmonised EU guidelines, EU standards

of safety and product specific standards. This certificate becomes void if the

units are modified without our approval.

Certificat de conformité aux directives européennes

Le constructeur, soussigné : GARDENA Kress + Kastner GmbH · Hans-

Lorenser-Str. 40 · D-89079 Ulm déclare qu’à la sortie de ses usines le maté-

riel neuf désigné ci-dessous était conforme aux prescriptions des directives

européennes énoncées ci-après et conforme aux règles de sécurité et autres

règles qui lui sont applicables dans le cadre de l’Union européenne. Toute

modification portée sur ce produit sans l’accord express de GARDENA suppri-

me la validité de ce certificat.

EU-overeenstemmingsverklaring

Ondergetekende GARDENA Kress + Kastner GmbH · Hans-Lorenser-Str. 40 ·

D-89079 Ulm bevestigt, dat de volgende genoemde apparaten in de door ons

in de handel gebrachte uitvoering voldoen aan de eis van, en in overeenstem-

ming zijn met de EU-richtlijnen, de EU-veiligheidsstandaard en de voor het

product specifieke standaard. Bij een niet met ons afgestemde verandering

aan de apparaten verliest deze verklaring haar geldigheid.

EU Tillverkarintyg

Undertecknad firma GARDENA Kress + Kastner GmbH · Hans-Lorenser-Straße

40 · D-89079 Ulm intygar härmed att nedan nämnda produkter överensstäm-

mer med EU:s direktiv, EU:s säkerhetsstandard och produktspecifikation. Detta

intyg upphör att gälla om produkten ändras utan vårt tillstånd.

Dichiarazione di conformità alle norme UE

La sottoscritta GARDENA Kress + Kastner GmbH · Hans-Lorenser-Str. 40 ·

D-89079 Ulm certifica che il prodotto qui di seguito indicato, nei modelli da

noi commercializzati, è conforme alle direttive armonizzate UE nonché agli

standard di sicurezza e agli standard specifici di prodotto. Qualunque modifica

apportata al prodotto senza nostra specifica autorizzazione invalida la presen-

te dichiarazione.

Declaración de conformidad de la UE

El que subscribe GARDENA Kress + Kastner GmbH · Hans-Lorenser-Str. 40 ·

D-89079 Ulm declara que la presente mercancía, objeto de la presente decla-

ración, cumple con todas las normas de la UE, en lo que a normas técnicas, de

homologación y de seguridad se refiere. En caso de realizar cualquier modifi-

cación en la presente mercancía sin nuestra previa autorización, esta declara-

ción pierde su validez.

Certificado de conformidade da UE

Os abaixo mencionados GARDENA Kress + Kastner GmbH · Hans-Lorenser-

Str. 40 · D-89079 Ulm Por este meio certificam que ao sair da fábrica os apa-

relhos abaixo mencionados estão de acordo com as directrizes harmonizadas

da UE, padrões de segurança e de produtos específicos. Este certificado fica-

rá nulo se as unidades forem modificadas sem a nossa aprovação.

EU Overensstemmelse certificat

Undertegnede GARDENA Kress + Kastner GmbH · Hans-Lorenser-Str. 40 ·

D-89079 Ulm bekræfter hermed, at enheder listet herunder, ved afsendelse fra

fabrikken, er i overensstemmelse med harmoniserede EU retningslinier, EU

sikkerheds standarder og produkt specifikations standarder. Dette certifikat

træder ud af kraft hvis enhederne er ændret uden vor godkendelse.

Bezeichnung des Gerätes: Elektronischer Druckschalter

Description of the unit: Electronic Pressure Switch

Désignation du matériel : Interrupteur manométrique

électronique

Omschrijving van het apparaat: Elektronische drukschakelaar

Produktbeskrivning: Elektronisk tryckströmställare

Descrizione del prodotto: Pressostato elettronico

Descripción de la mercancía: Interruptor electrónico de presión

Descrição do aparelho: Interruptor electrónico de

pressão

Beskrivelse af enhederne: Elektronisk manometer

EU-Richtlinien:

EU directives:

Directives européennes : 89/336/EG

EU-richtlijnen:

EU direktiv: 73/23/EG

Direttive UE:

Normativa UE: 93/68/EG

Directrizes da UE:

EU Retningslinier:

Anbringungsjahr der CE-Kennzeichnung:

Year of CE marking:

Date d’apposition du marquage CE :

Installatiejaar van de CE-aanduiding:

CE-Märkningsår: 1997

Anno di rilascio della certificazione CE:

Colocación del distintivo CE:

Ano de marcação pela CE:

CE-Mærkningsår:

Thomas Heinl

Ulm, den 1.12.1999 Technische Leitung

Ulm, 1.12.1999 Technical Dept. Manager

Fait à Ulm, le 1.12.1999 Direction technique

Ulm, 1-12-1999 Hoofd technische dienst

Ulm, 1999.12.1 Technical Director

Ulm, 1.12.1999 Direzione Tecnica

Ulm, 1.12.1999 Dirección Técnica

Ulm, 1.12.1999 Director Técnico

Ulm, 1.12.1999 Teknisk direktør

www.devicemanuals.eu

Indice

Altri manuali Gardena Interruttore

Gardena

Gardena 1735 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente