Garfield SWB08 Manuale utente
Models
SWB08
SWB09
DOZER BLADE OPERATOR MANUAL
Part Number
4350-2160-03
SWB
SWB
READ THIS MANUAL carefully to learn how to operate and service your machine
correctly. Failure to do so could result in personal injury or equipment damage.
THIS MANUAL MUST BE CONSIDERED a permanent part of your machine and
should remain with the machine when you sell it.
MEASUREMENTS in this manual are given in both metric and customary U.S. unit
equivalents. Use only correct replacements and fasteners.
LEFT and RIGHT SIDE is determined looking at the direction of the machine.
INTRODUCTION
4350-2160-03 (Rev. 21/08/20)
TO OUR CUSTOMERS:
®
Congratulations for acquiring a Garfield product .
We are confident in your excellent decision to purchase Garfield equipment, and are
honored to have you as our valued customer.
Your dealership shall make the technical pre-delivery of your equipment, and a
trained technician shall provide you maintenance and operation instructions
contained in this manual. Get in contact with your dealership representative if you
have questions regarding your equipment or need specialized help.
We recommend that you read this manual before operating this equipment.
Therefore, the time you take to learn about all maintenance features, adjustments
and recommendations will result in the long and efficient life of your equipment.
This equipment is covered by a warranty duration provided by your Garfield
authorized dealer at the purchase or technical delivery of the same.
®
Garfield is a Brand of Tecnomec Agrícola, S.A. de C.V., Aguascalientes, México.
The Dozer Blade, Consists of a blade connected to a pivot/main frame assembly.
Typically, this assembly mounts to a front hanger bracket along with side or rear axle
brackets that are bolted securely onto the frame of your Skid Steer.
The blade is attachable/detachable with a simple HQT (Hydraulic Quick-Tach)
mounting system and hydraulic hook-up. The Dozer Blade has three hydraulically
controlled ranges of motion: lift, angle & tilt.
GENERAL INDEX
INTRODUCTION
GENERAL INFORMATION
SPECIFICATIONS
SAFETY RULES
SAFETY DECALS
OPERATION
MAINTENANCE
RECOMMENDATIONS
SOLUTIONS FOR CERTAIN SETBACKS
ASSEMBLY
PARTS INDEX
BOLT TORQUE CHART
WARRANTY
!!
01
06
07
12
17
25
28
30
31
38
47
50
GENERAL INFORMATION
OPERATOR’S MANUAL
If this manual is lost or destroyed, a new copy can be requested to:
TECNOMEC AGRICOLA S.A. DE C.V.
Carr. a Paso Blanco, Km 2 No. 400
Col. Vista Hermosa, Jesús María
Aguascalientes, México. C.P. 20905
Tel. 01 (449) 922 47 66, 922 47 60
Fax 01 (449) 922 47 67
Dozer Blades SWB08 and SWB09, are designed to work safely, nevertheless,
please consider the following:
Read this manual carefully to understand proper handling and maintenance of your
Dozer Blade.
Write down its serial number in the warranty section to recover the machine in case of
theft.
Keep this manual in a safe place. Do not keep it in the machine.
A careful operator is the best guarantee against any accident since improper operation
of this machinery may cause serious injuries or, even, death.
Before operating please make sure there are no individuals around the Dozer Blade.
Be careful when making adjustments and prevent accidents when handling the
components of the Dozer Blade.
To achieve a more efficient and higher-quality fallow, it's important to read and execute
the adjustment & operation instructions of your Dozer Blade, since: a well lubricated
implement, with the appropriate adjustments, saves time, labor and fuel.
Once finishing your work, clean and inspect your disc Dozer Blade to detect any possible flaw.
1
GENERAL INFORMATION
2
Tecnomec Agrícola offers original spare parts through authorized dealers. Our
trained personnel, is well versed on methods to service your equipment. If you need
additional information or custom assistance, please contact your Bison authorized
dealership or directly to TECNOMEC AGRÍCOLA S.A. DE C.V.
YOUR AUTHORIZED DISTRIBUITOR
TECNOMEC AGRÍCOLA, S.A. DE C.V.
IT IS THE POLICY OF TECNOMEC AGRÍCOLA TO CONTINUOUSLY IMPROVE
ITS PRODUCTS AND RESERVES THE RIGHT TO MAKE CHANGES TO ITS
SPECIFICATIONS OR DESIGN WITHOUT INCURRING IN THE OBLIGATION TO
APPLY THEM TO UNITS ALREADY SOLD.
CURRENT MODELS MAY VARY IN SOME DETAILS GIVEN CONTINUOUS
IMPROVEMENT TO WHICH OUR PRODUCTS ARE SUBJECT.
*Some pictures show equipment that is not necessarily included as part of the
standard machine.
INSPECTION LIST
PRE-DELIVERY INSPECTION MADE BY BISON DEALERSHIP
Once the Dozer Blade has been adjusted completely, check and ensure that it is ready for
proper operation prior to deliver to customer. The following checklist is a reminder of
checkpoints. Verify that each point is satisfactory and recheck, once all proper adjustments
have been made.
Make sure the Dozer blade has been assembled correctly.
The bolts are properly tightened. Other hardware has been tightened to the
recommended torque.
Lubricate the points where required.
The Dozer Blade reverses correctly on both sides.
The hydraulic cylinder´s are positioned correctly.
Make sure all decals are set correctly. Replace them if necessary.
Assembly Date_________ Technician Name and Signature ________________________
3
INSPECTION LIST
DELIVERY BY BISON DEALERSHIP
The following list is an important reminder to be transmitted directly to the customer at the
moment the dozer blade is delivered.
Check each point once it was duly explained to the customer.
Point out to the Customer that useful life of this or any other machine is dependent of
proper lubrication as described on its Operator's Manual.
Hand your Customer the Operator's Manual and fully explain all operations, lubrication
and maintenance adjustments.
Explain the importance of a proper and safe operation of the machine. Stress the
importance of labels, since those prevent the operator from hazards due to unsafe
operation procedures and conditions.
Notify the Customer of accessories and options available.
When the Dozer Blade is transported on roads or highways during the day or night, you
should use lights or safety devices to alert other vehicle drivers. Advise the Customer
about the local town traffic local rules. We recommend using slow-moving vehicle
emblem (SMV).
Show the Customer how to mount the implement.
Explain to the Customer the serial number registration of the Dozer Blade, in the blank
space provided at the end of the Operator's Manual.
Fill out the Delivery and Warranty forms, listing the serial number of the implement.
Explain the Warranty, and perform a release form where the Customer and Distributor
agree upon.
The machine has been delivered ready to use, the customer has been informed about all
the operation and care of it.
Delivery Date_______________Name and signature___________________________
4
OWNER’S REGISTRATION
Name
City
State
Serial Number
Model Number
Purchase Date
INSPECTION LIST
POST-SALES INSPECTION
It's advised that the following items are constantly checked during first hours of operation.
Fully check the machinery and certify there are no damaged parts. Repair or change if
necessary.
Check there are no loose or missing screws.
If possible, operate the hammer mill to verify it is functioning properly.
Check the Operator's Manual in full with your Customer; emphasize the importance of
a regular and proper lubrication, as well as safety precautions.
Inspection Date ____________ Name and Signature___________________________
INSPECTION BEFORE EACH OPERATION
Lubricate the points that are required daily and those that are required to lubricate at a
recommended time.
Make sure the hardware is not loose and that there are no damaged or missing parts.
Verify that the stop screws have the same working length.
Verify Skid Steer hitch is secure.
SEASONAL INSPECTION
Make sure the recommended lubrication has been done.
Make sure that proper operation adjustments are made in the Dozer Blade for best
results.
Make sure the hydraulic sistem and cylinder are working properly.
5
Questo manuale è adatto per i seguenti modelli
1
Indice
