GBC FUSION 1000L Manuale utente

Fusion TM 1000L

A4 & A3 Laminators

A4 和A3 塑封机

Instruction Manual

使用说明书

www.accobrands.com

English

Contents 内容

中文

• Laminator Comparison Chart...............

• Lamination made simple........................

• Important Information

▶Safety instructions.................................

▶Points to note........................................

▶Service...................................................

▶Technical specifications........................

• Operation

▶Getting ready to laminate......................

▶Loading the pouch................................

▶Laminating.............................................

▶Cleaning................................................

• Certificate of Warranty...........................

• 塑封机性能对比........................................

• 塑封从此变得简单.....................................

• 安全警示

▶安全警示................................................

▶注意事项................................................

▶售后服务................................................

▶规格参数..............................................

• 塑封前的准备

▶简便设置................................................

▶放入塑封膜............................................

▶开始塑封................................................

▶清理清洁................................................

• 产品保修...................................................

&10

FUSION TM 1000L

A4 & A3 Laminator

A4 & A3 塑封机

Lamination Made Simple!

Points to Note

Safety Instructions

Welcome to the GBC Fusion

1000L laminator which is simple

to use with GBC lamination.

Perfectly designed for the

occasional users, at home or in

the small ofﬁce.

For best lamination results and

performance, use only GBC

branded pouches.

Please take a little time to study

these instructions to ensure

you get the best results out of

your machine.

• Use this unit only for its

intended use of laminating

documents

• Do not laminate an empty

pouch

• The unit must be

connected to a supply

voltage corresponding to

the electrical rating

shown on the unit

• Do not use a carrier with

this machine

• Ensure the machine is

clear of pouches prior to

starting the next pouch

• Clean the lamination

rollers on a regular basis

• Maximum A4 document

pouch 303mm x 210mm

on A4 GBC Fusion 1000L

laminator

• Maximum A3 document

pouch 426mm x 303mm

on A3 GBC Fusion 1000L

laminator

Your safety as well as the

safety of others is

important to ACCO®

Brands. In this instruction

manual and on the product

are important safety

messages. Read these

messages carefully.

The safety alert symbol

precedes each safety

message in this instruction

manual.This symbol

indicates a potential

personal safety hazard that

could hurt you or others, as

well as cause product

damage or property

damage.

The laminator complies

with protection class II: The

laminator is equipped

with dual protective

insulation and therefore

contains no touchable

metallic parts, which could

conduct voltage in the

event of a fault.

Only use the laminator in

indoor areas.

Technical Speciﬁcations

Electrical

Machine

Dimensions

Machine Weight

Maximum

Pouch Width

Maximum

Pouch Thickness

Maximum Thru-put

Thickness

Warm-Up Time

Speed

Fusion 1000L A4

220-240V~ 50/60Hz

400W / 1.8A

Fusion 1000L A3

220-240V~ 50/60Hz

520W / 2.4A

A4:

373.5x107.5x84.5mm

A3:

468.5x109x86mm

A4: 1.13 kg

A3: 1.56 kg

A4: 241 mm

A3: 303 mm

2 x 75 micron

(total 150)

0.7mm

Approximately

4 minutes

330 mm per minute

• Active anti jam feature

may not detect issue on

smaller items

• Failure to comply will

result in damage and

invalidate guarantee

Service

Do not attempt to service

or repair the pouch laminator

yourself. Unplug the unit

and contact an authorised

GBC service representative

for any required repairs.

Getting Ready to Laminate

Easy Set Up

1. Take the electrical plug and

place in an appropriate power

source, which is near the table you

intend to use.

2. To use the laminator move the

slider to the right from the ‘ ’ to

the ‘75 micron’ position. Below

the slider you will see a white

line, this indicates that you have

switched the laminator on.

NOTE: Only move slider to ‘ ’ for cold

lamination. Follow the instructions

included with your GBC self adhesive

laminate or other pressure sensitive, non

thermal laminating pouches.

Visual Ready Alert

3. The laminator will start to warm

up. When the laminator is ready

to use the green light next to the

‘tick ’ is illuminated.

NOTE: Your new laminator may emit a

slight odour during the initial operation.

Its is normal and will diminish after a few

hours of operation.

Cleaning

WARNING:UNPLUG

THIS PRODUCT BEFORE

CLEANING THE EXTERIOR.

WIPE EXTERIOR ONLY

WITH A DAMP CLOTH

AND DO NOT USE

DETERGENTS OR

SOLVENTS.

Regularly feed a cleaning

card or sheet of paper

through the laminator to

clean the rollers.

Before laminating

important or unique

documents, always run

a test pouch through the

laminator using a similar

type document.

Loading the Pouch

Laminating

1. Take your item to be laminated

and place in to the appropriate

sized laminating pouch, ensuring

it is ﬁrmly located along the sealed

edge. This is to help ensure that

you get optimal quality output.

NOTE: Do not cut pouches prior to

lamination.

1. On the front of the laminator

there are line indicators to help

you feed your pouch accurately.

Using the indicators feed the

sealed edge of the pouch, into the

laminator. The laminator will grip

the pouch and guide it through.

2. Upon exiting remove your

laminated item immediately and

lay on a ﬂat surface to ensure

SEALED EDGE

A3, A4, A5, etc. Irregular shaped item

SEALED EDGE

optimal quality.

3. When you are ﬁnished

laminating push the slider switch

back to the ‘ ’ position

and unplug.

Manual Release

NOTE: If the pouch does not appear at the

back of the laminator or you have mis-fed

the pouch - press and hold the release

button (indicated with the ) and pull the

pouch towards you out of the laminator.

Feed a cleaning card or sheet of paper

through the laminator to clean the rollers

before continuing.

FUSIONTM塑封机

性能对比

型号

最大塑封幅度

用户个人使用个人及多人使用多人使用

工作效率/速度

预热时间分钟分钟分钟分钟分钟分钟分钟分钟分钟

可塑封胶膜数

量/10分钟

塑封膜最大厚度

简便设置

工作指示灯

语音提示

手动反转

智能关机

触控操作

精准入纸导引

智能状态提示

智能反转

人机互动界面

智能选择胶膜

专业控制

菜单选择

偶尔使用每天使用频繁使用

塑封从此变得简单

注意事项

规格参数

安全警示

欢迎使用GBC Fusion 1000L塑封

机。GBC Fusion 1000L塑封机专为

在家里或小型办公室偶尔使用塑封

机的用户量身定制。

为取得最佳塑封效果，请使用GBC

品牌的塑封膜。

为确保机器的最佳工作效果，请先

花点时间阅读本使用说明。

本机仅适用于塑封文件。

• 请勿塑封空的塑封膜。

您和他人的安全对于爱珂品

牌公司非常重要。本使用说

明书内以及产品上有重要的

安全信息，务请仔细阅读。

警示标志会出现在本使用说

明书内每条安全信息之前。

这个警示标志表示潜在的对

您或他人的人身安全危险，

以及造成产品损坏或财产损

失的危险。

产品上有关于此警告的数国

语言。

本机符合二类绝缘标准：可

接触到的金属部分在机器故

障时有可能引发触电。本机

设计为双重绝缘保护，内无

可接触到的金属部分。

本机仅限室内使用。

电气规格

机器尺寸

机器重量

塑封膜最大幅度

塑封膜最大厚度

塑封件最大厚度

预热时间

塑封速度

A4: 220-240VAC/

50Hz /60Hz /1.0A/

250W

A3: 220-240VAC/

50Hz /60Hz /1.5A/

360W

A4:

370x107.5x80mm

A3:

465x109x81mm

A4: 1.3kg

A3: 1.64kg

A4: 241mm

A3: 303mm

2 x 70 mic

(共计 150 mic)

0.7 mm

约5分钟

330mm/分钟

• 请务必以塑封机铭牌上的

电源电压规格为准，将塑封

机通电。

• 请勿为本机搭配载体。

• 再次塑封之前，请确保机

器内没有塑封膜。

• 请定期清理辊轮。

• 1000L A4最大塑封尺寸：

303mm x 210mm

• 1000L A3最大塑封尺寸：

426mm x 303mm

• 如果不按以上要求操作，

将会造成机器损坏。此类

损坏不包含在产品保修范围

内。

售后服务

请勿尝试自行修理。如果机器需要

维修，请拔下电源插头，联系GBC

公司授权服务商。

塑封前的准备

开始塑封

放入塑封膜

简便设置

1. 将机器的电源插头插在一个就近

的插座上，并确保电源电压符合要

求。

2. 将开关从“ ”拨至”75 mic”

，当您能看到滑动开关下方的白

线，就代表开关已经处于开机档位

了。

注意：仅可使用 75mic/80mic规格的塑封

膜工作指示灯

3. 塑封机开始预热，当预热完成

后，“ ”符号右方的工作指示

灯亮起。

注意：新机在最初使用时可能会有一点气

味，这是正常的现象，气味会在机器使用

数小时后消失。

1. 塑封入口处的白色辅助线可以

协助您放入符合规格尺寸的塑封文

件。放入塑封膜时，请确保塑封膜

的封边在前。塑封机将完成剩下的

塑封步骤。

2. 塑封一旦完成，请将塑封品拿出

并放置于平坦的表面，这样可以取

得最佳塑封效果。

3. 如果不再塑封，请将开关拨至

“ ”，然后拔下电源插头。

注意：如果塑封件没有从塑封出口出来或

者您放错了塑封膜，请按下堵卡清除键

（指示灯显示为）的同时在塑封入口处

把塑封件拉出来。用一张清洁卡片或一张

白纸来清理辊轮。清理完毕后再继续使用。

1. 将文件用塑封膜装好：上下方向

同塑封膜的封边齐平，左右方向同

塑封膜的两端对齐。这将有助于取

得最佳塑封效果。

注意：塑封前请勿裁剪塑封膜。

在塑封重要文件之前，请用类似尺寸

/材质的文件先试机。

SEALED EDGE

A3, A4, A5, etc. Irregular shaped item

SEALED EDGE

清理清洁

警告：清洁塑封机外壳前，

请务必先拔掉塑封机的电源

插头。仅可使用湿布擦拭外

壳，请勿使用洗涤剂或其它

溶剂。

请定期使用一张清洁卡片

或者一张白纸，模拟塑

封过程，以达到清理辊轮

的目的。清洁卡产品代

码：EK50000。

产品保修

本机在正常使用的前提下，自购

买之日起，保修一年。在保修期

内，ACCO品牌公司将自行决定

或是维修机器或是免费换新。因错

误操作或不当应用而造成的质量

问题不在此保修范围内。保修时

需要出具购买日期的证明。未经

ACCO授权的售后人员对本产品

的维修或改装将导致产品保修条款

的失效。我们的目标是确保我们产

品的使用效果与规格参数相符。本

保修条款不与符合法规的消费者合

法权益相冲突。

Altri manuali per FUSION 1000L

Indice

Altri manuali GBC Plastificatrice

GBC

GBC HeatSeal H600PRO Manuale utente

GBC

GBC fusion 1100L Come usare

GBC

GBC OORCA-III Manuale utente

GBC

GBC AutoUltima Pro Manuale utente

GBC

GBC 54C Manuale utente

GBC

GBC FUSION 3000L Manuale di istruzioni

GBC

GBC RollSeal Ultima 35 EZ load Manuale utente

GBC

GBC FUSION 3000L Manuale utente

GBC

GBC Discovery 50 Manuale utente

GBC

GBC Inspire Manuale utente

GBC

GBC HEATSEAL H220 Manuale utente

GBC

GBC Talon 44 CE Manuale utente

GBC

GBC HeatSeal H65 Manuale utente

GBC

GBC 4500 Pro series Manuale utente

GBC

GBC Arctic Titan 165 Manuale utente

GBC

GBC GBC CLA303H Manuale utente

GBC

GBC 13 PRO Manuale utente

GBC

GBC HeatSeal H425 Manuale utente

GBC

GBC Docuseal 2700 Manuale utente

GBC

GBC FUSION 6000L Manuale utente

GBC

GBC HeatSeal Sprint H950 Manuale utente

GBC

GBC Inspire A4 Manuale di istruzioni

GBC

GBC 80-99 Manuale di installazione e funzionamento

GBC

GBC Falcon 60+ (-1) Manuale utente

Manuali Plastificatrice popolari di altre marche

Renz

Renz HT 330 L Manuale utente

Gfp

Gfp 44TH Manuale utente

Lapis

Lapis Lamina006 Manuale utente

Hama

Hama L44B Manuale utente

PAVO

PAVO FLORIDA Manuale utente

M-Triangel

M-Triangel MT-102 Manuale utente

Akiles

Akiles PROLAM 230 Manuale utente

D&K

D&K Masterpiece 550 Manuale utente

Falcon

Falcon F-40 Manuale utente

LEITZ

LEITZ EasyLaminator A4 Manuale utente

LEITZ

LEITZ coldLAM CS9 Manuale utente

kala

kala Starter 1080 Manuale utente

Fellowes

Fellowes Venus A3 Manuale utente

Qomolangma

Qomolangma FMJ-1400-WA-PLUS Manuale utente

Opus

Opus Coverator 330 Manuale utente

ALDI

ALDI OL 250-L Manuale utente

Phoenix

Phoenix 2700-DH Manuale utente

acropaq

acropaq AL-3400 Manuale utente