GE 94906 Manuale utente
Universal
Remote Control
RM94906
INSTRUCTION
MANUAL
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 1
1
Table Of Contents
Button Description . . . . . . . . . . . . . . . . . . 1-2
Battery Installation. . . . . . . . . . . . . . . . . . . . 2
Programming for TV. . . . . . . . . . . . . . . . . . . 4
Programming for VCR . . . . . . . . . . . . . . . . . 5
Programming for Cable Box or Satellite . . . 6
DVD or AUX Button . . . . . . . . . . . . . . . . . . . 7
Code Search. . . . . . . . . . . . . . . . . . . . . . . . . 8
Retrieving Codes . . . . . . . . . . . . . . . . . . . . . 9
Television Menu Function . . . . . . . . . . . 10-11
DBS Menu Function . . . . . . . . . . . . . . . 12-13
Sleep Feature. . . . . . . . . . . . . . . . . . . . . . . 14
Trouble Shooting . . . . . . . . . . . . . . . . . 15-16
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Instructions in Spanish . . . . . . . . . . . . . 17-31
Device Codes. . . . . . . . . . . . . . . . . . . . . 32-36
Button Description
INDIC ATOR LIGHT
The Indicator Light flashes to show that the remote
is working.
ON•OFF
The ON•OFF button operates the same as your
original remote (note: some RCA, GE and ProScan
models require you to press the device key to turn
the device on and the ON•OFF key to turn the
device off).
CODE SEARCH
Used to program the remote or to search through
codes.
TV, VCR, D VD•A UX, CBL•S AT
TheTV,VCR, DVD•AUX and CBL•SAT buttons are
used to select the device you want to control.
REVERSE, PLA Y, FOR WARD , REC ORD , STOP,
PAUSE
The REVERSE, PLAY, FORWARD, RECORD, STOP
and PAUSE buttons operate the same as on your
originalVCR remote.You must press the RECORD
button twice to begin recording. Buttons also con-
trol similiar functions for DVD and CD Player.
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 2
TV•V CR
The TV•VCR button operates the TV•VCR function of
yourVCR.
ENTER
The ENTER button is used to complete channel
selection for some brands of TV. It is also used to
complete the code entry process.
VOL & CHAN
TheVOL (Volume) and CH (Channel) buttons
increase or decrease the channel numbers or vol-
ume. The Channel buttons also control DVD SKIP
functions.
MUTE
To MUTE the volume on the TV.
PREV CH
PREV CH allows you to go to the previous channel
you selected. Operates the same as Last Channel,
Go Back or Recall button on your original remote.
0-9
The number buttons operate the same as on your
original remote, and are used for entering device
codes or channel numbers.
MENU
The MENU button calls up the TV, DBS and DVD set
up menus.
SLEEP
The SLEEP button allows you to set a time to turn
off the TV automatically.
Battery Installation
Your Universal Remote requires two (2) new
AAA alkaline batteries.To install the batteries:
1. On the back of the remote, push and slide
the cover off.
2.Match the batteries to the + and - marks
inside the battery case, then insert the bat-
teries.
2
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 3
3. Press and slide the battery cover back into
place.
Note: Programmed codes will remain in
memory for a short period of time allowing
for battery replacement. If batteries have
been dead for a prolonged period of time,
reprogramming may be required.
Button Description
3
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 4
Programming For TV
1. Manually turn on the TV.
2. Press and hold the
SETUP button until
the INDICATOR LIGHT
lights, then release
the SETUP button.
3. Press and release the
TV button (the
INDICATOR LIGHT
will blink then
remain lit).
4. Find the three digit
code for your TV in
the TV code list, and
enter it using the
Number Buttons.
After your code is
entered, the
INDICATOR LIGHT
will turn off.
5. Aim the remote at your
TV and press the
ON•OFF button.Your
TV should turn off.
Note: If your TV does not
respond, try all the codes
for your brand. If the codes
do not work, or your brand
is not listed, try the Code
Search method on page 7.
6. With your TV on, press
CH+. If the TV responds,
no further program-
ming is required.
7. Enter your code here
for easy reference.
BLINK
INDICATOR
LIGHT
TV CODE
OFF
SETUP
4
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 5
Programming For VCR
1. Manually turn
on the VCR.
2. Press and hold
the SETUP button
until the INDICATOR
LIGHT lights, then
release the SETUP
button.
3. Press and release
theVCR button (the
INDICATOR LIGHT
will blink then
remain lit).
4. Find the three digit
code for your VCR
in the code list and
enter it using the
Number Buttons.
After your code is
entered, the INDICATOR
LIGHT will turn off.
5. Aim the remote at
yourVCR and press
the ON•OFF button.
Your VCR should turn off.
Note: If your VCR does
not respond, try all
the codes for your
brand. If the codes
do not work, or your
brand is not listed,
try the Code Search
method on page 7.
6. With your VCR on,
press CH+. If the
VCR responds,
no further
programming
is required.
7. Enter your code
here for easy reference.
BLINK
INDICATOR
LIGHT
VCR CODE
OFF
SETUP
5
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 6
Programming For Cable Box or
Satellite Receiver
The CAB • SAT button is defaulted to
RCA/GE/ProScan DBS systems, however other DBS
systems can be programmed to this button.
1. Manually turn on the cable
box or satellite receiver.
2. Press and hold the
SETUP button until
the INDICATOR LIGHT
lights, then release
the SETUP button.
3. Press and release
the CBL•SAT button
(the INDICATOR
LIGHT will blink
then remain lit).
4. Find the three digit
code for your Cable
Box or Satellite Receiver
in the code list
and enter it using
the Number Buttons.
After your code is
entered, the
INDICATOR LIGHT
will turn off.
5. Aim the remote at
your Cable Box and
press the ON•OFF
button.Your Cable Box
should turn off.
Note: If your Cable Box
does not respond, try all
the codes for your brand.
If the codes do not work,
or your brand is not
listed, try the Code
Search method on
page 7.
6. With your Cable Box
on, press CH+. If the
Cable Box responds,
no further program-
ming is required.
7. Enter your code here
for easy reference.
BLINK
INDICATOR
LIGHT
CBL or SAT CODE
OFF
SETUP
CBL•SAT
6
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 7
7
Programming for DVD•AUX
The DVD•AUX button can be used for a DVD play-
er. It can also be assigned to any other type of
device (another TV, VCR, DVD, CD Player, or audio
receiver).
1. Manually turn on the
the device you wish
to assign to the
DVD•AUX button
(TV, VCR or Cable
Box or DVD Player).
2. Press and hold the
SETUP button until
the INDICATOR LIGHT
lights, then release
the SETUP button.
3. Press and release the
DVD•AUX button. The
INDICATOR LIGHT
will blink.
4. Find the three digit code
for the device you wish
to program in the code list
Enter the code using the
Number Buttons.
After your code is
entered, the INDICATOR
LIGHT will turn off.
5. Aim the remote at your
device and press the
ON•OFF button.Your
device should turn off.
Note: If your device
does not respond, try
all the codes for your
brand. If the codes do
not work, or your brand
is not listed, try the
Code Search method
on page 7.
6. With your device on,
press CH+. If the
device responds,
no further program-
ming is required.
7. Enter your code here
for easy reference.
BLINK
INDICATOR
LIGHT
DVD or AUX CODE
OFF
SETUP
DVD•AUX
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 8
8
Programming With Code Search
If your TV, VCR, DVD Player, cable box or satel-
lite receiver does not respond after you have
tried all the codes for your brand, or if your
brand is not listed, try searching for your code
by following the steps below.
1. Turn on the device
you wish to program.
2. Press and hold SETUP
until the INDICATOR
LIGHT lights, then
release SETUP.
3. Press and release the
device button for the
device you are
programming.The
INDICATOR LIGHT
will blink once then
remain lit.
For Auxillary device,
press DVD•AUX then
the device button you
are assigning to AUX.
4. Press and release
ON•OFF until your
device turns off.
Important: You may
have to press ON•OFF
up to 200 times.
5. When your device
turns off, press the
ENTER button, the
INDICATOR LIGHT
will go off.
BLINK
INDICATOR
LIGHT
SETUP
DVD•AUX CBL•SAT
OFF
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 9
Retrieving Codes
If you need to find the three-digit code for your
TV, VCR, DVD Player, DBS Receiver, or Cable
Box after your device is set-up using Code
Search, use this procedure.
1. Press and hold SETUP
until the INDICATOR
LIGHT lights, then
release SETUP.
2. Press and release the
device button for the
device’s code you are
retrieving .The
INDICATOR LIGHT
will blink once then
remain lit. For
DVD•AUX, press
DVD•AUX then
the device button for
the code you are
retrieving.
3. Press and release
SETUP.The
INDICATOR LIGHT
will turn off.
4. Starting with 0 on the
keypad, press the
number buttons in
order (0-9) until the
INDICATOR LIGHT
blinks.
5. The number which
causes the INDICATOR
LIGHT to blink is the
first digit of your code.
6. Repeat step 4 until you
have retrieved all three
numbers in the code.
BLINK
INDICATOR
LIGHT
SETUP
DVD•AUX CBL•SAT
SETUP
OFF
.....
9
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 10
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali GE Telecomando
