GEA VARIVENT Manuale utente

Hygienic valves

GEA VARIVENT® Valve Type B

Operating instruction (Translation from the original language)

430BAL008326EN_3

These Operating Instructions are the English translation of the original operating

instructions in the sense of the EU Machinery Directive. This document is

part, be copied, reproduced, translated or reduced to an electronic medium of

machine-readable form without the express permission of GEA Tuchenhagen

GmbH.

LEGAL NOTICE

Word marks

The designations VARIVENT® and T.VIS® are protected trademarks of GEA

Tuchenhagen GmbH.

430BAL008326EN_3

2 07.02.2022

TABLE OF CONTENTS

1 General Information 5

1.1 Information on the Document 5

1.1.1 Binding Character of These Operating Instructions 5

1.1.2 Notes on the Illustrations 5

1.1.3 Symbols and Highlighting 5

1.2 Manufacturer address 6

1.3 Contact 6

1.4 EU Declaration of Conformity in accordance with the EC Machinery Directive 2006/42/EC 7

1.5 Translated copy of the EU - Declaration of conformity in accordance with the Pressure Equipment Directive

2006/42/EU 8

2 Safety 9

2.1 Intended use 9

2.1.1 Requirements for operation 9

2.1.2 Pressure equipment directive 9

2.1.3 ATEX directive 9

2.1.4 Improper operating conditions 10

2.2 Operator’s Duty of Care 10

2.3 Subsequent changes 11

2.4 General safety instructions and dangers 11

2.4.1 Principles for safe operation 11

2.4.2 Environmental Protection 12

2.4.3 Electrical Equipment 12

2.5 Supplementary Regulations 12

2.6 Qualification of personnel 12

2.7 Safety equipment 14

2.7.1 Signage 14

2.8 Residual dangers 15

2.9 Hazard Areas 16

3 Description 18

3.1 Design 18

3.2 Functional description 20

3.2.1 Actuator Function 20

4 Transport and storage 21

4.1 Storage conditions 21

4.2 Transport 21

4.2.1 Scope of supply 22

5 Technical data 23

5.1 Type plate 23

5.2 Technical data 23

5.3 Cleaning connection 24

5.4 Resistance and permitted operating temperature of the sealing materials 25

5.5 Pipe ends - General table of measurements 27

5.6 Tools 28

5.7 Lubricants 28

5.8 Weights 28

6 Assembly and installation 30

6.1 Safety instructions 30

6.2 Notes on installation 30

6.3 Control head 30

6.4 Valve with Detachable Pipe Connection Elements 30

6.5 Valve with Welded Ends 31

6.6 Pneumatic connections 32

6.6.1 Air Requirement 32

6.6.2 Establishing Hose Connections 32

6.7 Electrical connection with T.VIS control top 33

7 Start-up 34

7.1 Safety instructions 34

7.2 Notes on commissioning 34

8 Operation and control 35

430BAL008326EN_3

07.02.2022 3

8.1 Safety instructions 35

9 Cleaning 36

9.1 Cleaning 36

9.1.1 Cleaning Process Examples 36

9.1.2 Cleaning effect 36

9.1.3 Cleaning the Leakage Cavity 37

9.2 Passivation 37

10 Maintenance 38

10.1 Safety instructions 38

10.2 Inspections 39

10.2.1 Product contact seals 39

10.2.2 Pneumatic connections 39

10.2.3 Electrical connections 39

10.2.4 Signs on the valve 40

10.3 Maintenance intervals 40

10.4 Prior to disassembly 40

10.5 Disassembling the Valve 41

10.5.1 Removing the Valve Insert 41

10.5.2 Separating the valve from the drive 42

10.5.3 Disassembly of the valve insert. 43

10.6 Maintenance 45

10.6.1 Cleaning the Valve 45

10.6.2 Replacing the V-Ring 46

10.6.3 Lubricating seals and threads 47

10.7 Installation 48

10.7.1 Spring 49

10.7.2 Cleaning hood 49

10.7.3 Place the seating ring between the housings 49

10.7.4 Installing the Valve in the Housing 49

10.7.5 Checking assembly 50

10.7.6 Reconnect the cleaning hose 50

10.7.7 Torques for the Clamps and Clamp Connections 52

10.7.8 Checking the function 52

11 Alarms 54

11.1 Malfunctions and remedies 54

12 Decommissioning 55

12.1 Safety instructions 55

12.2 Disposal 55

12.2.1 General notes 55

12.2.2 Valve Actuator Disposal 55

13 Spare parts list - mixproof valve B 56

14 Dimension sheet - VARIVENT® Double seat valve B 62

15 Appendix 64

15.1 Lists 64

15.1.1 Abbreviations and terms 64

430BAL008326EN_3

4 07.02.2022

1 General Information

1.1 Information on the Document

The present Operating Instructions are part of the user information for the

product. The Operating Instructions contain all the information you need to

transport, install, commission, operate and carry out maintenance for the product.

1.1.1 Binding Character of These Operating Instructions

These Operating Instructions contain the manufacturer's instructions to the

operator of the product and to all persons who work on or use the product

regarding the procedures to follow.

Carefully read these Operating Instructions before starting any work on or using

the product. Your personal safety and the safety of the product can only be

ensured if you act as described in the Operating Instructions.

Store the Operating Instructions in such a way that they are accessible to the

operator and the operating staff during the entire life cycle of the product. When

the location is changed or the product is sold make sure you also provide the

Operating Instructions.

1.1.2 Notes on the Illustrations

The illustrations in these Operating Instructions show the product in a simplified

form. The actual design of the product can differ from the illustration. For detailed

views and dimensions of the product please refer to the design documents.

1.1.3 Symbols and Highlighting

In these Operating Instructions, important information is highlighted by symbols

or special formatting. The following examples illustrate the most important types

of highlighting.

Danger

Warning: Fatal Injuries

Failure to observe the warning can result in serious damage to health, or

even death.

► The arrow identifies a precautionary measure you have to take to avoid

the hazard.

Warning: Explosions

Failure to observe the warning can result in severe explosions.

► The arrow identifies a precautionary measure you have to take to avoid

the hazard.

General Information

Information on the Document

430BAL008326EN_3

07.02.2022 5

Warning!

Warning: Serious Injuries

Failure to observe the warning can result in serious damage to health.

► The arrow identifies a precautionary measure you have to take to avoid

the hazard.

Caution!

Warning: Injuries

Failure to observe the warning can result in minor or moderate damage to

health.

► The arrow identifies a precautionary measure you have to take to avoid

the hazard.

Notice

Warning: Damage to Property

Failure to observe the warning can result in serious damage to the

component or in the vicinity of the component.

► The arrow identifies a precautionary measure you have to take to avoid

the hazard.

Carry out the following steps: = Start of a set of instructions.

1. First step in a sequence of operations.

2. Second step in a sequence of operations.

®Result of the previous operation.

®The operation is complete, the goal has been achieved.

Hint!

Further useful information.

1.2 Manufacturer address

GEA Tuchenhagen GmbH

Am Industriepark 2-10

21514 Büchen

1.3 Contact

Tel.:+49 4155 49-0

Fax:+49 4155 49-2035

[email protected]

www.gea.com

General Information

Manufacturer address

430BAL008326EN_3

6 07.02.2022

1.4 EU Declaration of Conformity in accordance with the EC Machinery Directive

2006/42/EC

General Information

EU Declaration of Conformity in accordance with the EC Machinery Directive 2006/42/EC

430BAL008326EN_3

07.02.2022 7

1.5 Translated copy of the EU - Declaration of conformity in accordance with the

Pressure Equipment Directive 2006/42/EU

Manufacturer: GEA Tuchenhagen GmbH

Am Industriepark 2-10

21514 Büchen

We hereby declare that the machine named below

Designation: Valve with actuator

Type: VARIVENT®

due to its design and construction as well as in the versions sold by us, meet the basic safety and health requirements of the following

guideline:

Relevant EC directives: 2006/42/EC EC Machinery Directive

Applicable harmonized standards, in

particular:

EN ISO 12100: 2010

Remarks: •This declaration will become invalid if any alterations are

made to the machine which have not been agreed with us

•We also declare that the relevant technical documentation for

this machine has been prepared in accordance with Annex

VII, Part A, and agree to submit the documentation on

justified request of national authorities on a data carrier

Person authorised for compilation and handover of technical

documentation:

GEA Tuchenhagen GmbH

CE Documentation Officer

Am Industriepark 2-10

21514 Buchen, Germany

Büchen, 24 January 2020

Franz Bürmann

Managing Director i.V. Matthias Südel

Head of Engineering

General Information

Translated copy of the EU - Declaration of conformity in accordance with the Pressure Equipment Directive 2006/42/EU

430BAL008326EN_3

8 07.02.2022

2 Safety

2.1 Intended use

Double-seat valve B is used for the mix-proof separation of incompatible media at

flow path intersections in pipe systems.

The medium should preferably flow in the opening direction of the valve disk to

avoid pipe hammers when the valve is opened or closed.

If the valve is used in the opposite direction (valve closing), a damping cylinder

can be used to avoid pressure drops.

Do not install the valve in spring-opening, as this will open when there is a current

or air failure and leads to product mixing.

In a closed pipe system, hydraulic pressure build-up may occur when the valve

switches and result in seal damage.

The valve is resistant to pressure surges in its closed state.

Hint!

The manufacturer will not accept any liability for damage resulting

from any use of the valve which is not in accordance with the

designated use of the valve. The risk of such misuse lies entirely with

the operator of the facility.

2.1.1 Requirements for operation

The prerequisite for reliable and safe operation of the component is proper

transportation and storage as well as professional installation and assembly.

Operating the unit within the limits of its designated use also involves adhering to

the operating, inspection and maintenance instructions.

2.1.2 Pressure equipment directive

The component is a piece of pressure equipment (without safety function) in the

sense of the pressure equipment directive 2014/68/EU. Classified according to

Annex II in category 1.

According to the scope of directive 2014/34/EC, article 1, paragraph 2, f, the

exception of the directive applies, due to conformity with the machine directive

2006/42/EU.

The nominal diameters smaller than DN 25 are subject to article 4, paragraph 3

of the Pressure Equipment Directive which specifies sound engineering practice.

Nominal diameters ≥ IPS 4“; DN 125 valid for the fluid group II.

In the event of any deviations, GEA Tuchenhagen GmbH will supply a specific

Declaration of Conformity.

2.1.3 ATEX directive

In areas with an explosive atmosphere, only valves suitable for use in such areas

may be used.

Safety

Intended use

430BAL008326EN_3

07.02.2022 9

Refer to and observe the additional operating instructions “ATEX version valves”.

For details regarding the marking of valves for potentially hazardous areas also

refer to the additional operating instructions “ATEX version valves”.

If these valves are used in areas with a potentially explosive atmosphere, you

must absolutely comply with directive 2014/34/EC with respect to all ignition

hazards.

2.1.4 Improper operating conditions

The operational safety of the component can not be guaranteed under improper

operating conditions. Therefore avoid improper operating conditions.

The operation of the component is not permitted if:

•Persons or objects are in the danger zone.

•Safety devices are not working or were removed.

•Malfunctions have been detected on the component.

•Damage to the component has been detected.

•Maintenance intervals have been exceeded.

2.2 Operator’s Duty of Care

The operating company of the component has a special responsibility for the

proper and safe handling of the component within their company. Only use the

component when it is in perfect operating condition in order to prevent danger to

persons and property.

This operating manual contains information that you and your employees need

for safe operation over the life of the component. Be sure to read these Operating

Instructions carefully and ensure that the measures described here are observed.

The operator's duty of care includes planning the necessary safety measures and

monitoring that these measures are observed. The following principles apply:

•Only qualified personnel may work on the component.

•The operating company must authorize personnel to carry out the relevant

tasks.

•Order and cleanliness must be maintained at the work stations and in the

entire area surrounding the component.

•Personnel must wear suitable work clothing and personal protective

equipment. As the operating company must ensure that work clothing and

personal protective equipment are used.

•Inform personnel regarding any properties of the product which might pose a

health risk and the preventative measures to be taken.

•Have a qualified first-aid representative on call during the operation. This

person must be able to initiate any necessary first-aid measures in case of an

emergency.

Safety

Operator’s Duty of Care

430BAL008326EN_3

10 07.02.2022

Altri manuali per VARIVENT

Indice

Altri manuali GEA Unità di controllo

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente

Flyron

Flyron FN-BC04 Manuale utente