Gefen EXT-DVIKA-HBT2 Manuale utente
EXT-DVIKA-HBT2
User Manual
Release A2
*Preferred
DVI KVM
HDBaseT Extender
w/ USB, RS-232, 2-way Audio, and POH
™
ii
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install or place this product near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. To reduce the risk of electric shock and/or damage to this product, never handle or
touch this unit or power cord if your hands are wet or damp. Do not expose this
product to rain or moisture.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15. Batteries that may be included with this product and/or accessories should never be
exposed to open ame or excessive heat. Always dispose of used batteries
according to the instructions.
Important Safety Instructions
Gefen warrants the equipment it manufactures to be free from defects in material and
workmanship.
If equipment fails because of such defects and Gefen is notied within two (2) years from
the date of shipment, Gefen will, at its option, repair or replace the equipment, provided
that the equipment has not been subjected to mechanical, electrical, or other abuse or
modications. Equipment that fails under conditions other than those covered will be
repaired at the current price of parts and labor in effect at the time of repair. Such repairs
are warranted for ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or tness for any particular purpose, all of
which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from Gefen.
3. Copper cables are limited to a 30 day warranty and cables must be in their original
condition.
The information in this manual has been carefully checked and is believed to be accurate.
However, Gefen assumes no responsibility for any inaccuracies that may be contained
in this manual. In no event will Gefen be liable for direct, indirect, special, incidental, or
consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. The technical information contained herein
regarding the features and specications is subject to change without notice.
For the latest warranty coverage information, refer to the Warranty and Return Policy under
the Support section of the Gefen Web site at www.gefen.com.
iii
Warranty Information
iv
Technical Support
(707) 283-5900 (800) 472-5555
8:00 AM to 5:00 PM Monday - Friday, Pacic Time
Email
Web
http://www.gefen.com
Mailing Address
Gefen
Core Brands, LLC
c/o Customer Service
1800 S McDowell Blvd
Petaluma, CA 94954 USA
Product Registration
Register your product here: http://www.gefen.com/kvm/Registry/Registration.jsp
iv
Contacting Gefen Technical Support
v
• Always make sure that this product is running the latest rmware. The Gefen
Syner-G™ Software Suite is a free downloadable application from Gefen that provides
automatic download and installation of rmware upgrades for this product.
Download the application here: http://www.gefen.com/synerg/
• This product is only compatible with Gefen Syner-G 2.1.x and later, in order to support
EDID management and rmware updates.
DVI KVM HDBaseT™ Extender w/ USB, RS-232, and POH is a trademark of Gefen, LLC.
© 2016 Core Brands, LLC. All Rights Reserved. All trademarks are the property of their respective owners.
Gefen, LLC reserves the right to make changes in the hardware, packaging, and any accompanying documentation
without prior written notice.
Operating Notes
This product uses UL listed or CE-compliant power supplies.
Pb
vi
Features and Packing List
Features
• Extends DVI, USB, RS-232, and 2-way Audio over a single CAT-5e
◦ 1080p Full HD (1920 x 1080 @ 60Hz, 4:4:4, 12-bit), up to 330 feet/100 meters
◦ 1080p Full HD (1920 x 1080 @ 60Hz, 4:4:4, 8-bit), up to 495 feet/150 meters
◦ WUXGA (1920 x 1200 @ 60Hz, 8-bit), up to 495 feet/150 meters
• Extends HDMI**, USB, RS-232, and 2-way Audio over a single CAT-5e
◦ 4K Ultra HD (3840 x 2160 @ 60Hz, 4:2:0, 8-bit), up to 330 feet/100 meters
◦ 4K Ultra HD (3840 x 2160 @ 30Hz, 4:4:4, 8-bit), up to 330 feet/100 meters
◦ 4K DCI-Cinema (4096 x 2160 @ 30Hz 4:4:4, 8-bit), up to 330 feet/100 meters
◦ 1080p Full HD (1920 x 1080 @ 60Hz, 4:4:4, 12-bit), up to 330 feet/100 meters
◦ 1080p Full HD (1920 x 1080 @ 60Hz, 4:4:4, 8-bit), up to 495 feet/150 meters
◦ WUXGA (1920 x 1200 @ 60Hz, 8-bit), up to 495 feet/150 meters
• HDMI Features Supported:
◦HDMI 2.0 up to 4K 60Hz, 4:2:0, 8-bit color
◦HDCP 2.2 and 1.4
◦12-bit Deep Color
◦ LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master
Audio™ pass-through
◦ 3DTV pass-through
◦ CEC pass-through
◦ Lip Sync pass-through
• Analog L/R Stereo Audio extension from Sender to Receiver and from Receiver to
Sender
• Receiver audio input accommodates a microphone or a line level audio source
• POH (Power Over HDBaseT™) feature provides power to Sender unit over the link
cable - only the Receiver needs external power
• Advanced EDID Management via Gefen Syner-G™ software
• Link Quality Monitoring via Gefen Syner-G™ software
• In-eld rmware update via USB, using Gefen Syner-G™ software
• Locking power connector
• 1U tall, half-rack-width enclosures can be:
◦ Surface-mounted
◦ Installed in a standard 19-inch rack using the EXT-RACK-1U-GRY rack tray
(available separately)
◦Placed on a shelf
** Use Gefen DVI to HDMI cables
vii
Packing List
The DVI KVM HDBaseT™ Extender w/ USB, RS-232, and POH ships with the items listed
below. The packing contents of the Sender and Receiver unit are listed below. If any of
these items are not present in the box when you rst open it, immediately contact your
dealer or Gefen.
• 1 x DVI KVM HDBaseT™ Extender w/ USB, RS-232, and POH - Sender unit
• 1 x DVI KVM HDBaseT™ Extender w/ USB, RS-232, and POH - Receiver unit
• 1 x 6 ft. DVI cable (M-M)
• 2 x 6 ft. 3.5mm mini-stereo cable (M-M)
• 1 x 6 ft. Dual-Link DVI cable (M-M)
• 1 x 6 ft. USB A-B cable (M-M)
• 8 x Self-Adhesive Rubber Feet
• 4 x L-Shaped Surface-Mounting Brackets
• 8 x 6mm M3 Phillips at head machine screws, 0.5mm pitch, for use with
EXT-MP-C01
• 4 x 5mm 6-32 Phillips at head machine screws, for use with EXT-RACK-1U
• 1 x 48V/1A DC power supply with locking plug
• 1 x IEC AC power cord with interchangeable connectors (US, UK, EU, AU)
• 1 x Quick-Start Guide
Features and Packing List
1080P
®
®
™
™
HDCP
2.2
4K
CINEMA
DCI, 4096 x 2160, 30Hz
4K
CINEMA
DCI, 4096 x 2160, 30Hz
60Hz, 4:2:0
60Hz, 4:2:0
Deep Color Support
viii
Table of Contents
1 Getting Started
Introduction............................................................................................................ 2
Sender Unit ................................................................................................... 2
Receiver Unit................................................................................................. 4
Installation ............................................................................................................. 7
Connection Instructions................................................................................. 7
Application Diagram ...................................................................................... 8
2 Basic Operation
LED Status .......................................................................................................... 12
Audio Connections .............................................................................................. 13
DIP Switch Conguration .................................................................................... 15
EDID Management...................................................................................... 16
EDID Lock ................................................................................................... 17
HDCP .......................................................................................................... 17
Long-Reach Mode....................................................................................... 18
RS-232 Interface ................................................................................................. 19
RS-232 Interface ......................................................................................... 19
3 Advanced Operation
Using Syner-G™ ................................................................................................. 24
Verifying the USB Driver ............................................................................. 24
Downloading an EDID................................................................................. 26
Uploading an EDID ..................................................................................... 29
Copying an EDID ........................................................................................ 31
Viewing an EDID ......................................................................................... 33
4 Appendix
Default Settings................................................................................................... 40
Sender Unit DIP Switches........................................................................... 40
Receiver Unit DIP Switches ........................................................................ 40
Updating the Firmware........................................................................................ 41
Network Cable Diagram ...................................................................................... 47
Rack Tray Installation .......................................................................................... 48
Specications ...................................................................................................... 49
Index.................................................................................................................... 51
This page left intentionally blank.
This page left intentionally blank.
Indice
Altri manuali Gefen Estensione
Gefen
Gefen USB 2.0 SR Manuale utente
Gefen
Gefen DVI-FM1000 Manuale utente
Gefen
Gefen USB-500 Manuale utente
Gefen
Gefen EXT-VGAAUD-CAT5-142 Manuale utente
Gefen
Gefen EXT-3GSDI-F0-141 Manuale utente
Gefen
Gefen EXT-WRS232 Manuale utente
Gefen
Gefen USB 2.0 LR Extender EXT-USB2.0-LR Manuale utente
Gefen
Gefen DVI-1500HD Manuale utente
Gefen
Gefen DVI CAT-5 Extreme Manuale utente
Gefen
Gefen CAT5-3000 Manuale utente
Gefen
Gefen EXT-VGA-141LR Manuale utente
Gefen
Gefen EXT-DVI-EDIDP Manuale utente
Gefen
Gefen CAT5-4000 Manuale utente
Gefen
Gefen GTV-WHDMI Manuale utente
Gefen
Gefen Toolbox GTB-HDMI-3DTV Manuale utente
Gefen
Gefen PS2-100 Manuale utente
Gefen
Gefen EXT-DP-CP-FM10 Manuale utente
Gefen
Gefen EXT-HDKVM-LAN Manuale utente
Gefen
Gefen USB-MINI Manuale utente
Gefen
Gefen CAT5-5000HD Manuale utente
