Geneq F100 Manuale utente
1/ 26
GENEQ F100
User Manual
2/ 26
Statement
Please read carefully:
The final interpretation of this user manual belongs to GENEQ INC.
Thank you very much for your purchase. For directions on how to use the
product, please be sure to read the user manual.
This user manual is only for your receiver. If your receiver does not match the
case in user manual, the actual situation of the receiver shall prevail.
Information in this document is subject to change without notice; GENEQ INC.
reserves the right to change or improve its products and to make changes in
the content without obligation to notify any person or organization of such
changes or improvements. If you have any questions, please contact customer
service center, or contact our authorized dealers.
Customer safety is important. Please carefully read the notes and instructions
in User Manual. In order to avoid unexpected damage, you should only use
original supplied parts. If you do not use the system with the correct procedure
or connect incompatible accessories, cause the equipment damage, and may
even endanger other person and your safety. In this regard, the company does
not assume any responsibility.
3/ 26
Contents
1. Product overview__________________________________________________________7
2. Technical Specification__________________________________________________ 10
2.1. GNSS _______________________________________________________________________10
2.2. System configuration ______________________________________________________11
2.3. Tilt Survey __________________________________________________________________11
2.4. Weight and Measurement_________________________________________________11
2.5. Environmental _____________________________________________________________12
2.6. Electrical____________________________________________________________________12
2.7. Data interface ______________________________________________________________12
2.8. User interface ______________________________________________________________12
3. WEB UI___________________________________________________________________ 13
3.1. Status ______________________________________________________________________13
3.1..1. Position __________________________________________________________________________ 13
3.1..2. Datalink __________________________________________________________________________ 14
3.1.3. Satellites _________________________________________________________________________ 15
3.1.4. Information ______________________________________________________________________ 16
4/ 26
3.2. Settings ____________________________________________________________________17
3.2.1. Working Mode___________________________________________________________________ 17
3.2.2. Satellite Settings _________________________________________________________________ 18
3.2.3. Device Configuration ____________________________________________________________ 19
3.2.4. NMEA Message __________________________________________________________________ 20
3.2.5. View Logs________________________________________________________________________ 20
3.2.6. Configuration Set ________________________________________________________________ 21
3.3. Download __________________________________________________________________21
3.3.1. Raw Data ________________________________________________________________________ 21
3.3.2. Backup Data _____________________________________________________________________ 22
3.4. Management_______________________________________________________________22
4. Pannel Settings__________________________________________________________ 23
4.1. Power on/off _______________________________________________________________23
4.2. Working Status interface __________________________________________________23
4.2.1. Base Station Mode _______________________________________________________________ 23
4.2.2. Rover Station Mode______________________________________________________________ 23
4.2.3. Static Mode ______________________________________________________________________ 23
4.3. Data Link ___________________________________________________________________24
4.3.1. Radio ____________________________________________________________________________ 24
4.3.2. GPRS_____________________________________________________________________________ 24
4.3.3. External __________________________________________________________________________ 24
4.4. Differential _________________________________________________________________25
4.5. System Settings ____________________________________________________________25
5. Tilt calibration instructions _____________________________________________ 25
5.1. Magnetic calibration_______________________________________________________25
5/ 26
5.2. MEMS Calibration__________________________________________________________26
5.3. Pole Calibration ____________________________________________________________27
6. Accessories ______________________________________________________________ 28
First, thank you very much for purchasing Geneq F100 geodesic GNSS receiver
(hereinafter referred to as F100). F100 is a GNSS receiver with strong performance
and constant strength. It takes LINUX system as the development platform, stable
and reliable, support secondary development, it can play well in different fields.
Product Features:
● 5W Receive/Transmit full protocol radio
● Super capacity smart battery
●Capsule design 2.0
●Smart Color touch screen
●Combined antenna
●Tilt Survey 3.0
●Intelligent base
●Type-C port
The next I will show you the excellent performance and usage of F100
6/ 26
1. Product Overview
❶
Satellite indicator light
Extinguish: No receiving satellites；
Blink red:Satellites received, but not positioning success；
Blink green: Positioning success, but not fixed；
Green light on: Fixed solution；
Red/Green lights flicker alternately: GNSS motherboard dysfunction;
7/ 26
❷
Datalink indicator light
Green light on: Datalink setup success；
Blink green: Data transmission；
Blink blue: Blue light flashes according to the set static sampling interval;
❸
Bluetooth indicator light
Extinguish: No Bluetooth connection；
Blue light on: Bluetooth connection with device;
❹
Power indicator light
Green light on：Electric quantity: 30%-100%；
Blink green：Electric quantity: 10%-30%；
Blink red：Electric quantity:＜10%，beeping sound: interval per second.
Red light on when charging，green light on after charging;
❺Power button
Power button, used to start and close devices
❻
Display
1.45-inch color touch screen, used for interface display and settings;
❶5pin To connect external power supply and external radio
❷Type-C For charging and data transfer
❸SIM NANO SIM Card
8/ 26
2. Technical Specification
2.1. GNSS
● Channels：336
● Signal tracking
Satellite Navigation System Signals
GPS
L1 C/A, L2E, L2C, L5
GLONASS
L1 C/A, L2 C/A, L3 CDMA
BDS
B1, B2, B3
Galileo
E1, E5A, E5B, E5AltBOC, E6
NAVIC
L5
SBAS
L1 C/A, L5
QZSS
L1 C/A, L1 SAIF,L1C, L2C, L5
● Position accuracy
Position Mode
Plane Precision
Elevation
Static
±（2.5+0.1×10
-6
D）mm ±（5+0.4×10
-6
D）mm
RTK
±（8+1×10
-6
D）mm ±（15+1×10
-6
D）mm
● Initialization time: ＜10s
● Initialization reliability: ＞99.9%
9/ 26
● Update rate: up to 50Hz
2.2. System configuration
Operation system Linux
Internal Storage
Bluetooth
32G
BT5.0, BLE
WIFI
Radio
Network (EG25-G)
802.11b, g, n Hotspot / client mode
RX/TX, Power:5W, Frequency: 403-470MHz
Mode
Frequency
LTE FDD B1/B2/B3/B4/B5/B7/B8/B12/B18/B19/B20/B25/B26/B28
LTE TDD
UMTS
B38/B39/B40/B41
B1/B2/B4/B5/B6/B8/B19
GSM
B2/B3/B5/B8
2.3. Tilt Survey
Horizontal precision
30°Rod tip accuracy
60°Rod tip accuracy
0.6mm/⁰Tilt
Within 2cm
Within 5cm
10 / 26
2.4. Weight and Measurement
Weight 1.55KGS
Measurement 154mm x 154mm x 76mm
2.5. Environmental
Work temperature -30℃~+65℃
Stock temperature -40℃~+80℃
Humidity 100% Condensing
Ingress protection IP67
Shock & Vibration
Withstand 2m along with rod drop onto hardwood
floor, 1.2m drop without pole
2.6. Electrical
Power 9-28V DC，2A
Battery
Internal battery，7.2V, 13600mAH,97.92Wh
2.7. Data Interface
5Pin To connect external power supply and external radio
Indice
Altri manuali Geneq Ricevitore
