General Hearing Simplicity SmartTouch Manuale utente
General Hearing Instruments, Inc.
175 Brookhollow
Harahan, LA 70123
www.generalhearing.com
MADE in USA
OWNER’S MANUAL
Device Information
Left serial no.
Right serial no.
Purchase date:
CONGRATULATIONS
!
You have made a significant step toward improving your life by joining
thousands of satisfied customers currently using advanced hearing aids
from General Hearing Instruments.
The Simplicity is a digital device that has been specifically developed for
those who have difficulty understanding speech in the presence of back-
ground noise. You will find speech not just louder, but clearer and easier to
understand.
Please review the DVD and manual carefully.
They contain valuable information that will help you achieve maximum
benefit from your new hearing aid and how to properly care for it.
Be patient with your new hearing system. Learning to use the device will
require a period of adjustment. It may take a little time to become totally
familiar with the operation of the device and hearing certain sounds again.
Use of a hearing aid is only part of hearing habilitation and may need to be
supplemented by auditory training and instruction in lipreading.
22
Simplicity Warranty Policy
This “Limited Warranty” as dened in the Consumer Product Warranty
and Federal Trade Commission Improvement Act gives you specic legal
rights. You may have additional rights which vary from state to state.
Service Labor: For a period of 1 year from the consumer’s original
purchase date, General Hearing will service your hearing device at no
charge as a result of defective parts or workmanship.
Parts: Defective parts will be replaced at no charge with new or
equivalent parts for 1 year from the consumer’s original purchase date.
Any replacement parts are warranted for the remaining portion of the
original warranty period.
21
TABLE OF CONTENTS
Device Reference ..................... 1
Color Code Reference ............... 2
Battery Insertion ........................ 3
Testing The Device ................... 4
Device Insertion ........................ 5
Operation of Device .................. 6
Memory Selection ..................... 7
Battery Information ................... 8
Daily Maintenance ..................... 9
PolyTube Removal .................... 10
PolTube Cleaning ...................... 11
Troubleshooting ........................ 12
Precautions ............................... 13
Important Notice........................ 14
Important Notice Con’t .............. 15
Warning to Dispensers............... 16
About Your Hearing Device ........ 17
Performance Data ..................... 18
Performance Data con’t ............. 19
Performance Data con’t ............. 20
Repair Service ........................... 21
Warranty Coverage ................... 22
REPAIR SERVICE
If you have viewed the Quick-Start DVD and reviewed the troubleshooting
section of this manual and you are still experiencing difficulty with your
Simplicity device, servicing of the device may be required.
All Simplicity device repairs are handled through the ReadyWearExpress
Service Center. There is a processing fee for repairs during the warranty
period. The processing fee includes inspection, cleaning, preventive main-
tenance, and return shipping and handling. Our web site offers complete
information regarding repairs service: www.readywearexpress.com
ReadyWear Express Service Center
PMB #144
5860 Citrus Blvd. Suite D
River Ridge, LA 70123
Call: (504) 729-6185 (customer service)
E-mail: service@readywearexpress.com
Visit: www.readywearexpress.com
20 1
DEVICE REFERENCE
Microphone port
Memory Select Button
Battery Door
Sound port with
dome ex-tip
Red or Blue color
indicator
Retention cord
Battery
compartment
Ear hook
100
90
80
70
60
5060708090
(dbSPL)
MAX OSPL90 : 106.3 dB
AT........................800 Hz.
HF AVG ............... 100.6 dB
HF AVF F.O.G. .....10.1 dB
Reference Test Gain
Target: ................. 23.6 dB
Measured: ...........18.2 dB
Response Limit: 45.3 dB
F1 = ....................200 Hz
F2 = ....................7,500 Hz
Eq. Input Noise 25.7 dB
Battery (1.3V)....... 0.82 mA
Averaging Frequencies
1000 Hz
1,600 Hz
2,500 Hz
THD FREQ SRC
0.2% 500 Hz. 70 dB
0.1% 800 Hz 70 dB
0.3% 1,600 Hz 65 dB
Freq.................2000 Hz
Attack..............52 mS
Release ...........90 mS
PERFORMANCE DATA Continued
2 19
COLOR CODE REFERENCE
Simplicity devices have been color coded to
help distinguish a left device from a right one.
Look closely at the base of the Sound Port
Dome. It will be imprinted with either red or
blue stamp. The red color indicates the right
ear and blue for the left. For future reference
the devices themselves are made for either
ear, only the poly-tubes are ear-specific.
It is recommended that you change the poly-
tube approximately every three months or
sooner if they crack or become discolored.
Refer to pages 8 and 9 for proper cleaning and
replacement instructions.
Red or Blue
color stamp
120
110
100
90
80
70
60
50
(dB)
OSPL 90 Curve RESP Curve
PERFORMANCE DATA Continued
The multi-curve analysis shown on the
left reects typical Smart Touch perfor-
mance at each of the four memories.
The data were gathered using a stan-
dard 2cc coupler. Note that the curves
were obtained with an input signal of
composite noise with an intensity of
65 dBSPL.
The curve with the least amount
of overall gain (Composite Curve)
represents Memory 1. Curve 3, with
the most amount of overall gain,
represents Memory 4. The overall
frequency response remains constant
across memories, and that gain is the
only variable.
18 3
BATTERY INSERTION AND REMOVAL
Your new Simplicity uses a zinc-air #10
battery. Do not remove the air activa-
tion tab until you are ready to install the
battery.
To open the battery door, place your
thumbnail under the lip of the door and
gently lift. Note: The battery has two
distinct sides. The positive side (+) is
flat and the negative side (-) is rounded.
Insert the round side first into the bat-
tery door. If properly seated, the flat
side should be flush with the top of the
battery door. The battery door should easily snap shut. Do not use force to
close the door, damage to the device may result.
To remove the battery, open the door and push the battery up and away
from the lipped side of the door or use the magnetic end of the utility brush
to easily lift out the battery.
50
40
30
20
10
0
-10
-20
(dB)
Composite Curve 1
Curve 2 Curve 3
Composite (memory 1)
Source.........................65.0 dB
Peak............................12.9 dB
Peak Frequency...........3,100 Hz
RMS Out .....................72.5 dB
Noise Reduction..........0.0 dB
Curve 1 (memory 2)
Source.....................65 dB
Peak........................16.7 dB
Peak Frequency......1,000 Hz
RMS Out .................75.7 dB
Noise Reduction........0.0 dB
Curve 2 (memory 3)
Source.....................65 dB
Peak........................20.6 dB
Peak Frequency..3,100.0 Hz
RMS Out .................79.8 dB
Noise Reduction........0.0 dB
Curve 3 (memory 4)
Source.....................65.0 dB
Peak........................24.8 dB
Peak Frequency..3,100.0 Hz
RMS Out .................83.8 dB
Noise Reduction........0.0 dB
SIMPLICITY PERFORMANCE DATA
Use magnetic tool
to insert and remove
battery.
4 17
TESTING THE DEVICE
To ensure your Simplicity device is functioning
properly, perform the following sound test.
Insert a fresh battery into device and close the
door. The device will automatically start in program
one. Cup the device in your hand and hold it close
to your ear. You should hear a high-pitched sound
called feedback. If you don’t hear anything, check
to ensure the battery is correctly installed and the
door is fully closed. You may need to press the
Memory Select button to change the memory to a
higher volume setting. If you still don’t hear any
whistling, then try a fresh battery.
If you continue to experience silence from the device, technical sup-
port is available at www.readywearexpress.com (see page 18 for contact
info).
ABOUT YOUR HEARING AID...
Try to wear your hearing aid daily. Occasional use will not allow you to at-
tain full benefit from your hearing aid. Allow for a period of adjustment in
your routine listening environment. It will take a period of time to become
fully adjusted to hearing certain sounds again.
If you have purchased a single aid, we suggest that you consider purchas-
ing a device for your other ear. Amplification for both ears provides a sense
of hearing balance and allows you to reduce the amount of volume needed by
a single aid.
Hearing aids will not restore normal hearing and will not prevent or improve
a hearing impairment.
Discontinue use of your aids(s) and consult with your physician if you
notice any of the following symptoms:
•skin irritation
•increased production of earwax
•any pain associated with the ear
16 5
Ensure that you have the correct device: red is for right and blue for left.
Place the Simplicity on top of the ear with the ear hook hanging over the
front of the ear (Fig. 1). The earmold should be oriented so that the tubing
is facing toward the opening of the ear canal. Gently push in the tip (red or
blue) of the tubing into your ear canal (Fig. 2).
After inserting the tip of the earmold tubing into the ear canal, seat the
retention cord into the bottom bowl of ear (Fig. 3).
Fig. 1 Fig. 2 Fig. 3
DEVICE INSERTION AND REMOVAL
WARNING TO HEARING AID DISPENSERS
A hearing aid dispenser should advise a prospective hearing aid user to
consult promptly with a licensed (preferably an ear specialist) before
dispensing a hearing aid if the hearing aid dispenser determines through
inquiry, actual observation, or review of any other available information
concerning the prospective user, that the prospective user has any of the
following conditions:
• Visible congenital or traumatic deformity of the ear.
• History of active drainage from the ear within the previous 90 days.
• History of sudden or rapidly progressive hearing loss within the previous 90 days.
• Acute or chronic dizziness.
• Unilateral hearing loss of sudden or recent onset within the previous 90 days.
• Audio metric air-bone gap equal to or greater than 15 decibels at 500 hertz (Hz),
1,000 Hz, and 2,000 Hz.
• Visible evidence of signicant cerumen accumulation or a foreign body in the ear
canal.
• Pain or discomfort in the ear.
6 15
OPERATION OF DEVICE
To turn your device on:
Insert the battery into the battery door and
close the door. The instrument will be activated
once the battery door is closed and will always
begin operation in Memory 1. Do not force the
door to close, damage may occur.
To turn your device off:
Open the battery door so that the battery is no
longer making contact with the device.
Note: If you detect a high pitched
whistling sound coming from the device,
check the positioning of the sound tube in
your ear.
*Open battery door when device is not in
use to extend battery life.
IMPORTANT NOTICE TO PROSPECTIVE HEARING AID USERS (continued)
If you have reservations about your ability to adapt to amplification, you
should inquire about the availability of a trial-rental or purchase option
program. Many hearing aid dispensers now offer programs that permit
you to wear a hearing aid for a period of time for a nominal fee after
which you may decide if you want to purchase the hearing aid.
Federal law restricts the sale of hearing aids to those individuals who have
obtained a medical evaluation from a licensed physician. Federal law per-
mits a fully informed adult to sign a waiver statement declining the medical
evaluation for religious or personal beliefs that preclude consultation with a
physician. The exercise of such a waiver is not in your best health interest
and its use is strongly discouraged.
Children with a hearing loss. In addition to seeing a physician for a
medical evaluation, a child with a hearing loss should be directed to an
audiologist for evaluation and rehabilitation since hearing loss may cause
problems in language development and the educational and social growth
of a child. An audiologist is qualified by training and experience to assist
in the evaluation and rehabilitation of a child with a hearing loss.
Indice
Altri manuali General Hearing Apparecchio acustico
