General X5 Manuale utente

INSTRUCTION MANUAL

X5 Red Dot and Line Laser

Please read this instruction manual before operating this product.

Please store this instruction manual in the carry case for future reference.

CAUTION: Class 2 Laser Product

Do not stare directly into the laser beam from apertures.

Do not disassemble the instrument or attempt to perform any internal servicing

as this will void your warranty. No user serviceable parts included.

Only approved and authorised service technicians can carry out warranty repairs.

SAFETY

BatteriesCarry bag

Laser target Magnetic base

General X5

Please ensure the following items are included with your laser.

If anything is missing please contact your retailer.

ITEM CHECKLIST

INCHES CM

Vertical laser port (x1)

PRODUCT OVERVIEW

Horizontal laser port (x1)

Control panel

Power / locking switch Dot laser ports (x5)

CONTROL PANEL

Dot / line mode

Pulse mode

Pulse mode indicator

Battery indicator

MODE

DETECTOR CONTROL PANEL*

Sound on / off

Laser sensor

Power indicator

Coarse / fine mode indicator

Coarse / fine mode

Bubble vial

On/off button

Direction arrows

*The detector is an additional accessory which can be purchased from your retailer.

USING YOUR LASER

Setting Up

Power Supply

Operation

‣Select a place as close as practical to the work site.

Ensure the location is clear of traffic.

‣Place the laser on a level surface such as a bench or mount.

The X5 is powered by three AA alkaline batteries.

‣To turn the unit on slide the power switch to “on” position. Self

levelling will commence and all dot and line beams will appear.

‣If the unit is outside the self levelling range the unit will not

level causing the speaker to beep and the laser beam to turn off.

‣Press the dot / line mode button on the control panel to cycle

through the active beams.

Using Your Detector*

‣Press the pulse button on the control panel on top of the laser to

enter into pulse mode.

‣Switch the detector on and move it into the path of the laser beam.

‣Hold the detector upright for horizontal beams. Rotate the detector 90°

for vertical beams. The direction arrows will indicate the position of the

laser beam. The centre LED will indicate alignment with the beam.

MODE

*The detector is an additional accessory which can be purchased from your retailer.

CARE AND MAINTENANCE

‣Reflective surfaces such as glass may reflect the beam, causing

two beams to strike the detector at the same time. This may create

inaccurate reference points.

‣This is a precision instrument and should always be transported

within the carry case provided.

‣Always slide the on/off lock to “off” when transporting the unit.

‣Whenever possible, store the instrument in a dry, shady location.

‣The X5 should be calibrated every 6 months, if ongoing accurate

levelling is required or an impact has occurred.

‣The operator should check the X5 for accuracy before precision

levelling is attempted.

‣Clean the instrument with a dry, soft cloth after use in dusty, damp

or wet conditions before storing.

‣Smudges and fingerprints may be removed with a damp tissue or

a soft, lint-free cloth.

WARRANTY

The General X5 comes with a 3 year manufacturers warranty.

Our goods come with guarantees that cannot be excluded under the Australian

Consumer Law. You are entitled to a replacement or refund for a major failure

and for compensation for any other reasonably foreseeable loss or damage. You

are also entitled to have the goods repaired or replaced if the goods fail to be of

acceptable quality and the failure does not amount to a major failure.

Separate to the above Australia Consumer Law, Spot-on oers a global warranty.

Customer Support

To assist you with any queries or technical questions please contact the

customer support line: 1300 658 338

Operates 5 days a week: 8am - 5pm (EST)

30 Day Free Service

If your laser is out of calibration within the rst 30 days of purchase you

are entitled to a free calibration adjustment. For more information please

contact your retailer or Spot-on.

Indice

Altri manuali General Livello laser

General

General XL1 Manuale utente

General

General ML-3DG Manuale utente

General

General GML3DGSTDKT Manuale utente

General

General Titanium Series Manuale utente

General

General RL-20R Manuale utente

General

General X3G Manuale utente

General

General ML-3DR Manuale utente

General

General Titanium Series Manuale utente

General

General 3DG Manuale utente

General

General RL-20G Manuale utente

Manuali Livello laser popolari di altre marche

Nedo

Nedo ET-5 Manuale utente

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Manuale utente

LaserLiner

LaserLiner X2-Laser Manuale utente

Spectra

Spectra LL300N Manuale utente

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Manuale utente

Nedo

Nedo Crossliner 4 Manuale utente

Lasertec

Lasertec FX360G Manuale utente

Flex

Flex ALC 8 Manuale utente

Black & Decker

Black & Decker LZR5 Manuale utente

Johnson

Johnson 40-6692 Manuale utente

Cocraft

Cocraft HL 20-SG Manuale utente

Zircon

Zircon iLine Manuale utente

HWH

HWH 310 SERIES Manuale utente

Leica

Leica iCON robot 60 Manuale utente

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Manuale utente

LaserLiner

LaserLiner ActiveFinder XP Manuale utente

DeWalt

DeWalt DW082 Manuale utente

imex

imex EL20 Manuale utente