Genie WNVR18P5AI Manuale utente

Quick Start Guide

Please read these instructions carefully before operating the unit

and keep for further reference.

PoE 8 Channel H.265 8MP

NVR with 1HDD Bay and Facial

Recognition

WNVR18P5AI

Intro Section

Please read this instruction carefully before operating the product and keep it for further

reference. All examples and pictures used here are for reference only.

The contents of this manual are subject to change without notice.

CAUTION:

• Please check the device and the accessories after getting the device. If there are any

damages, shortages or defects, please contact your dealer immediately.

Contents

iii

1.0 Introduction..........................................................................................................4

1.1 Product Features...........................................................................................4

1.2 Product Dimensions.....................................................................................4

1.3 Speciﬁcation.................................................................................................5

2.0 HDD Installation...................................................................................................6

3.0 Rear Panel Instruction..........................................................................................7

4.0 Start Up and Shut Down......................................................................................8

5.0 Login ....................................................................................................................9

6.0 Conﬁgurations and Connections ........................................................................10

6.1 Network Conﬁguration & Adding IP Camera...............................................10

7.0 UPnP .....................................................................................................................12

8.0 NAT.......................................................................................................................13

9.0 Manual Recording and Playback .........................................................................14

9.1 Manual Recording.........................................................................................14

9.2 Playback.......................................................................................................14

The Genie WNVR18P5AI is an 8 channel PoE H.265 8MP NVR with 1 HDD bay and facial

recognition. The NVR supports 8 channel 8MP, 6MP, 5MP, 4MP, 3MP, 1080p, 1280 × 1024,

960p, 720p, 960H, D1 and CIF IP video input as well as 8 channel simultaneous playback.

1.1 Product Features

• Supports 8 CH 8MP, 6MP, 5MP, 4MP, 3MP, 1080p, 1280×1024, 960p, 720p, 960H, D1, CIF

IP video input

• Standard H.265 high proﬁle compression format to get high-quality video at much

lower bit rate

• Intuitive and user-friendly Graphic User Interface (GUI), Windows style operation by

mouse

• Multi-mode recording: Manual / Timer / Motion / Sensor / Smart events

• Playback : 8CH simultaneous playback

• Supports face detection and comparison

• Search : Time slice, time, event, tag, smart and face database search

• Multi-user online simultaneously

• Authorisation management, log view and device status view

• Supports multiple VCA (Video Content Analytics) events, such as object abandoned/

missing, region intrusion, tripwire, video tampering, etc.

• Supports POS information overlay on live view and playback

• Express and ﬂexible backup via USB, network and so on.

• Pentaplex : Preview, record, playback, backup and remote access

• DHCP, DDNS, PPPoE network protocol

• Remote control via Web Client or CMS : Preview, playback, backup, PTZ and

conﬁguration

• 8 PoE network ports, PoE power supply supported

• Dual stream technology for local storage with high deﬁnition, remote network

transmission and remote surveillance with mobile device

• 4K output, true high resolution display

• Supports PTZ preset and auto cruise, up to 255 presets and 8 cruises

• Supports NAT function and QR code scanning by mobile phones

• Powerful mobile surveillance by smart phones with iOS and Android OS

• P2P ready for hassle free remote access

1.2 Product Dimensions

1.0 Introduction

300mm

249mm

45mm

Quick Start Guide PoE 8 Channel H.265 8MP NVR with 1HDD Bay and Facial Recognition

1.3 Speciﬁcation

Model WNVR18P5AI

System OS Embedded Linux

Video

Input 8CH IPC input

Incoming Bandwidth 80Mbps

Output

HDMI x 1 : 3840×2160 @60fps / 3840×2160 @ 30fps / 1920×1080 / 1280×1024 / 1024×768

VGA 1 : 1920×1080 / 1280×1024 / 1024×768

Resolution 8MP / 6MP / 5MP / 4MP / 3MP / 1080p / 1280×1024 / 960p / 720p / 960H / D1 / CIF

Compression Standard H.265/H.264

Audio

Input 8 CH IPC audio input

Output RCA x1

Two-Way Audio RCA x1

Compression G.711 (A/U)

Record

Record Stream Dual stream recording

Resolution 8MP / 6MP / 5MP / 4MP / 3MP / 1080p / 1280×1024 / 960p / 720p / 960H / D1 / CIF

Frame Rate NTSC: 30fps, PAL: 25fps

Mode Manual, Timer, Motion, Sensor, Smart events

Face

Recognition

Channel 8CH

Face Picture Database 32 libraries, 5000 face pictures

Computing Capability 180 pictures / minute

Face Picture Search Search by picture is supported

Database Management Add, modify, delete and search face pictures

Face Picture Adding Add face pictures through App, Web and external import

External Face Picture Enrolment Resolution: 128×128, 1920×1080, Size: ≤ 70KB, Format: jpg&jpeg

Face Picture Comparison Supports allow list and block list alarm

Face Track Yes

Map of Face Track Resolution: 2560×1920, Size: ≤ 512KB, Format: jpg&jpeg

Statistic Graph of Face Information Bar graph

Statistic Mode of Face Information Statistics by day, week, month, quarter as well as customised time period

Mobile Device OS iOS, Android

Storage HDD SATA x1, max 8TB per HDD

Playback

Playback Maximum 8CH (Simultaneous)

Search Time slice / Time / Event / Tag search

Smart Search Highlighted colour to display the camera record in a certain period of time, different colours refers to different record

events.

Function Play, Pause, FF, FB, Digital zoom, etc.

Alarm

Mode Manual, Sensor, Motion, Exception, Smart events

Input 8 CH local alarm input, supports IPC alarm input

Output 4 CH

Triggering Record, Snap, Preset, E-mail, etc.

Network

Interface RJ45 1000Mbps x 1

Protocol TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP

PoE Port RJ45 × 8 (IEEE802.3af, output power: ≤80W)

Remote

Monitoring

Immix Compatible with Immix via RTSP only (2-way audio not supported)

Sentinel Yes, Firmware 1.1.0 or later

Backup & Storage

Local Backup USB stick, USB mobile HDD

Network Backup Yes

Storage HDD: SATA x1, max 8TB per HDD

Port

RS485 Yes (Full-duplex), Connect to PTZ or keyboard

USB USB 2.0 × 1, USB 3.0 × 1

Remote Controller Optional

Others

Power Supply DC48V/2.5A

Consumption ≤ 15W (Without HDD and PoE power supply)

Working Environment -10~50°C, 10%~90% (Humidity)

Dimensions 300 × 249 × 45 mm

This series of the product supports 1 SATA hard drive. Please make sure that the device is

powered off before the installation. The pictures of the installation are for reference only.

1. Loosen the screws to open the cover.

2. Screw the screws into the HDD but do not tighten them.

3. Place the HDD onto the bottom of the machine.

4. Turn over the machine and secure the HDD with the screws.

5. Connect the power and data cables.

6. Install back the cover and secure it with the screws.

Note: Please check the inside structure of the device and make sure that the cables are

connected well before installing the cover back. Please format the HDD before using.

2.0 HDD Installation

The interfaces of the rear panel are for reference only.

3.0 Rear Panel Instruction

Name Description

DC48V Connector for power input

PoE Ports PoE network ports, connect to PoE IP camera

LAN Network port

VGA Connect to monitor

HDMI Connect to high deﬁnition display device

USB Connect to USB storage device or USB mouse

AUDIO OUT Audio output

AUDIO IN Audio input

P/Z P/Z; Connector for PTZ

K/B K/B; Connector for keyboard

ALARM IN Alarm input, connectors for sensors

ALARM OUT Alarm inutput

GND Ground

Startup

1. Connect the monitor and the power.

2. The device will boot and the power indicator will display blue.

3. A wizard window will pop up.

Shutdown

Click “Start” and then select “Shutdown” icon. This will bring up a shutdown window. The

device will shut down by clicking “OK” button. Then disconnect the power.

4.0 Start Up and Shut Down

The default username is admin and the default password is 123456. You must conﬁgure the

wizard if you start the NVR for the ﬁrst time and you may change the password when you

conﬁgure the wizard for the ﬁrst time. You can skip the settings wizard next time.

Click “Start” and select “Login”. This will take you to see a login box. Enter the default

username and password you set. Then you will see the live image.

5.0 Login

6.1 Network Conﬁguration & Adding IP Camera

After you ﬁnish adding IP cameras, you can see the live images through the monitor of the

NVR. The following will mainly introduce how to add the IP cameras via LAN/WAN.

LAN

1. Set the network of the NVR. Go to Start → Settings → Network → TCP/IP. Enter IP

address, subnet mask, gateway, etc. If using DHCP, please enable DHCP in both the

NVR and the router.

2. Go to Start → Settings → Network → Port. Enter HTTP port (the default value is 80),

server port (the default port is 6036).

3. The internal ethernet port is the port which connects all the PoE ports with the NVR

system. The PoE ports are available if the internal ethernet port is online. If it is ofﬂine,

all the PoE ports will be unavailable. The IP address and subnet mask of the internal

ethernet port can be changed to make the port in the same network segment with the

IP cameras which directly connect to the PoE ports of the NVR.

4. Go to Start → Settings → Camera → Add Camera. The NVR will automatically refresh the

cameras searched. The IPC which supports the Onvif protocol may be added manually.

If the IPC searched is not in the same local network as the NVR, you should select the

device and click to modify the IP address.

6.0 Conﬁgurations and Connections

Indice

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente