Gentner Digital-6 Manuale utente
The most common
problems with the
Digital-6:
Reset the presets if the
batteries die.
Please see the following
pages to re-setup your
Digital-6
6 Digital-6 User’s Guide
Tuning
Changing Preset Selection:
The Digital-6’s six presets come factory set to
frequencies across the Assistive Listening Band
selected for best overall performance:
Preset Factory Setting Frequency
1 Channel 2 72.1 MHz
2 Channel 10 72.5 MHz
3 Channel 19 72.95 MHz
4 Channel 21 74.7 MHz
5 Channel 28 75.5 MHz
6 Channel 36 75.9 MHz
You may change the presets by following the
step-by-stepinstructionsonthenextthreepages.
See page 10 for frequencies corresponding to
other channels.The Digital-6 receiver is digitally
tuned. Once a channel is selected, no further
adjustments are necessary.
Digital-6 User’s Guide 7
❑ Step 1
Remove the battery cover from the back of the
receiver.
❑ Step 2
RemovethetwoPhillipscasescrewsandremove
the back panel.
Battery
Cover
Digital-6 (back)
8 Digital-6 User’s Guide
Tuning
❑Step 3
Turn the preset selector wheel to the desired
preset (1-6).
❑ Step 4
Using a small, flathead screwdriver, turn the
channel setting rotary switches to the desired
channel number. The left-hand switch indicates
the“ones”place. The right-hand switchindicates
the “tens” place. The example below shows the
setting for channel 19.
❑ Step 5
Push the memory button to save the channel
setting to the current preset. Repeat steps three
through five for each preset.
1
2
4
3
5
6
7
8
9
0
0
1
2
3
Ones
Place Tens
Place
Memory
Button
Digital-6 User’s Guide 9
PB Board
1
2
4
3
5
6
7
890
0
1
2
3
1
90
Channel Setting
Rotary Switches
Memory
Button
Preset
Selector
✰ Note
Before changing batteries, wait one minute after
turning off the receiver. This allows the CPU to
switch from active mode to standby mode.
Otherwise memory will be lost and the presets
will return to the factory settings. Also, units
withoutpower(duetono/deadbatteries)formore
than one hour will revert to the factory presets.
10 Digital-6 User’s Guide
Frequency Chart
Channel *Frequency Channel *Frequency
01 72.05 20 74.65
02 72.10 21 74.70
03 72.15 22 74.75
04 72.20 23 75.25
05 72.25 24 75.30
06 72.30 25 75.35
07 72.35 26 75.40
08 72.40 27 75.45
09 72.45 28 75.50
10 72.50 29 75.55
11 72.55 30 75.60
12 72.60 31 75.65
13 72.65 32 75.70
14 72.70 33 75.75
15 72.75 34 75.80
16 72.80 35 75.85
17 72.85 36 75.90
18 72.90 37 75.95
19 72.95 *Frequencies are in MHz
Altri manuali per Digital-6
1
Indice
Altri manuali Gentner Ricevitore
