GEPRC SMART16 Manuale utente
User Manual & Setup Guide
V1.0
SMART16
Contents
Overview:...................................................................................................................................................... 3
Specification:...................................................................................................................................... 3
Features: .............................................................................................................................................. 3
Warranty Policy: ......................................................................................................................................... 5
PS:.......................................................................................................................................................... 5
Bind TBS NanoRX: ..................................................................................................................................... 6
Bind AC900 Receiver: ............................................................................................................................... 7
Bind ELRS Receiver:................................................................................................................................... 8
Install Betaflight:.......................................................................................................................................10
Install Drivers:...................................................................................................................................10
OpenTX Transmitter: ..............................................................................................................................11
IRC Tramp (Analog): ...............................................................................................................................13
Install Propellers:......................................................................................................................................15
Install Battery:............................................................................................................................................16
Pre-flight check:.......................................................................................................................................17
Include:........................................................................................................................................................18
Contact:.......................................................................................................................................................18
3/ 18
Overview:
Introducing the new 1.6-inch GEPRC SMART16 mini-quadcopter, currently available in 5
versions: PNP, AC900 and TBS Nano, ELRS 915, ELRS 2.4G
SMART 16 continues the consistent lightweight design concept of the Phantom series. The
1.5mm carbon fiber arm, with a 1mm top plate allows it to be lightweight and tough at the
same time. We used 11000Kv 0803 brushless motors paired with 1610 props, so you can easily
freestyle in your favorite field or a bando. The quadcopter comes with a 3D printed battery
holder and will be powered by two 1S 380mAh batteries, making it weigh as little as 53.0g,
and providing you with 4 minutes of flight time.
We pursue lighter weight, better flying experience, and more functionality for all our products!
Specification:
Model: SMART16 Quadcopter
FC: STABLE F411 FC
ESC: STABLE BLheli_S 12A 4IN1 ESC
VTX: STABLE 5.8G 200mW VTX
Camera: Caddx Ant
Antenna: IPEX 5.8G 70mm Antenna
Motor: SPEEDX2 0803-11000KV
Propeller: 1610-2
Frame: GEP-ST16
Motor to Motor: 78mm
Weight: 33.8g (TBS NanoRX Version)
Receiver: PNP / Frsky R-XSR / TBS NanoRX / ELRS 915MHz / ELRS 2.4G
Features:
1. 1.6 inch tiny size + light weight, just 36.0g.
2. With 2S 380mAh battery with plenty of power output.
3. Equipped with 200mW 5.8G VTX, with 6 frequency bands and 8 frequency point selection.
4. Caddx Ant camera with high quality image. Clear and clean!
5. Independent battery compartment design, can be sticked on top or bottom, making it easy
and convenient to switch batteries.
6. The latest 0803 motor is matched with 1610-2 propeller proving maximum power and
4/ 18
efficiency.
7. Suitable for both freestyle and racing.
8. Includes a full set of high qualt 3D printed parts for superior flying experience.
5/ 18
Warranty Policy:
1. If the quadcopter is damaged or is having unknown issues, please contact GEPRC. We'll do
our best to get this taken care of as quick as possible.
2. Any impact damage, product liquid damage, high temperature damage, or other artificial
damage, not attributable to the quality of the product is not covered by warranty.
PS:
1. All components had been strictly inspected and tested before shipping.
2. If you have any problems, please cooperate with our engineers to figure out solutions. (E-
mail: support@geprc.com.)
6/ 18
Bind TBS NanoRX:
1. For Taranis X9D/X9D Plus/X9E and Taranis QX7, turn on the transmitter, go to the TOOLS
–CROSSFIRE SETUP –XF Micro TX, and select Bind.
2. Turn on the receiver while holding the bind button on the receiver, release the button
and see if the green light on and flashing. Then hold the button for about 8 second, and
release. The green light will turn off and the red light will start flashing, update micro RX？’
will appear on the transmitter screen. Select ‘ENTER’.
3. Wait for the update to complete. The green light will be on, indicating that the binding
was successful.
1
2
3
4
5
6
Bind Button
Binding
Binding Successful
7/ 18
Bind AC900 Receiver:
Before binding, update the firmware of the built-in module of the remote control to v1.1.3
(the built-in module firmware version of the remote controller needs to match with the
receiver's firmware version, otherwise the receiver cannot be bound).
1. Turn on the receiver while holding the bind button on the receiver, release the button
and wait for the green light flash.
2. For Taranis X9D/X9D Plus/X9E and Taranis QX7, turn on the transmitter, go to the MENU
–MODEL SETUP –PAGE 2, choose Internal RF, and select BIND.
3. When the green light is on, it indicates that the binding is successful. Turn off the receiver,
and then turn on the receiver. The green light on the receiver must be on, indicating that the
link is normal.
1
2
3
Binding Button
Binding
Binding Successful
8/ 18
Bind ELRS Receiver:
The binding methods for GEPRC ELRS 868mhz, ELRS 915MHz and ELRS 2.4G receivers are
exactly the same.
1. Turn the receiver on and off for three times (with an interval of 1 second), you'll be able
to see continuous blue light double flashes on the receiver, indicating that the receiver has
entered the binding mode.
2. For the X9D / X9D Plus / X9E and Taranis QX7 remote controller, turn on the remote
controller, long press the menu key to enter tools –ELRS, and select [Bind].
3. Wait until the blue light on the receiver changes from continuous double flashing to
constant on, indicating that the binding is successful. Turn the receiver off and turn it on
again. The blue light must be always on, indicating that the connection between the receiver
and the remote control is established.
1
2
Binding successful
Binding button
Binding
9/ 18
10 / 18
Install Betaflight:
Although your quadcopter comes from the factory nearly completely ready to fly, you still
need to install Betaflight to facilitate your subsequent use of Betaflight for debugging.
Installation package download link:
https://github.com/betaflight/betaflight-configurator/releases
Open the web page, pull to the bottom, and select the appropriate installation package to
download. File extensions for different OS. .exe - Windows system, .dmg - MacOS
system, .rpm / .deb - Linux system, .apk - Android system.
Install Drivers:
If you are on windows, you must install the drivers manually.
CP210x Drivers:
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-
drivers
STM USB VCP Drivers:
http://www.st.com/en/development-tools/stsw-stm32102.html
Zadig:
http://zadig.akeo.ie/
Indice
Altri manuali GEPRC Quadricottero
GEPRC
GEPRC Cinebot30 Manuale utente
GEPRC
GEPRC Pika Manuale di istruzioni
GEPRC
GEPRC Cygnet 3 Manuale di istruzioni
GEPRC
GEPRC Cinelog25 Manuale utente
GEPRC
GEPRC Phoenix Manuale di istruzioni
GEPRC
GEPRC Cinelog25 Manuale utente
GEPRC
GEPRC Sparrow Manuale di istruzioni
GEPRC
GEPRC Mark2 Manuale di istruzioni
GEPRC
GEPRC Crocodile5 Baby Manuale utente
GEPRC
GEPRC CineLog30 Manuale utente
