geratech EGE-UHD2-642FS Manuale utente
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate.
Geratech assumes no responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Geratech assumes no responsibility for any inaccuracies that may be contained in
this document. Geratech also makes no commitment to update or to keep current the
information contained in this document.
Geratech reserves the right to make improvements to this document and/or product at any
time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval
system, or any of its part translated into any language or computer file, in any form or by
any means - electronic, mechanical, magnetic, optical, chemical, manual, or otherwise -
without express written permission and consent from Geratech.
© Copyright 2015 by Geratech.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be trademarks of the
companies with which they are associated.
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack or install or operate this
equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of fire, electrical shock and
injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots
in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed
upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit
housing that provide ventilation and allow for sufficient space for air to circulate around
the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 21/12/15 Preliminary Release
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
CONTENTS
1. Introduction.........................................................................1
2. Applications ........................................................................1
3. Package Contents...............................................................1
4. System Requirements........................................................1
5. Features...............................................................................2
6. Operation Controls and Functions ...................................3
6.1 Front Panel.......................................................................3
6.2 Rear Panel .......................................................................4
6.3 Remote Control ................................................................5
6.4 IR Pin Definitions..............................................................6
6.5 OSD Menu .......................................................................6
6.6 RS-232 Protocols .......................................................... 12
6.7 Telnet and RS-232 Commands..................................... 12
6.8 Telnet Control ................................................................ 17
6.9 Web GUI Control........................................................... 19
7. Connection Diagram.........................................................22
8. Specifications ...................................................................23
1
1
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
1
1. INTRODUCTION
The 6 by 2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switch which allows HDMI
signal from any of its 6 sources to be routed to and displayed on any of its 2 connected
HDMI displays simultaneously with View All Mode and Picture-in-picture (PIP) supported.
Fast switching technology can greatly eliminate the time required by swapping or turning
ON/OFF the connected displays. It supports 4Kx2K, 3D, 30-bit Deep Color, Hi-Def audio
and other features defined by HDMI specifications.
The management of source/sink scenarios can be operated easily through on-panel
buttons, IR remote control, RS-232 or Ethernet protocol.
2. APPLICATIONS
• Entertainment Room / Home Theater
• Show Room / Demo Room
• Lecture Room/Hall Presentation
• Show Room/Demo Room
• Public Commercial Display
• Information Board
3. PACKAGE CONTENTS
• 6 by 2 HDMI 4K UHD Matrix with HDCP2.2 and Fast Switching
• Remote Control with Battery
• Left & Right Rack Ears
• 5V/2.6A DC Power Adaptor
• IR Receiver Cable
• Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as Blu-ray/DVD/PS3 player or Set-Top-Box and output HDMI
TV/Display and or audio amplifier with connection cables.
2
2
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
2
5. FEATURES
• HDMI with 3D & 4Kx2K supported, HDCP 2.2 and DVI compliant
• Supports 6 HDMI inputs and 2 HDMI outputs
• Displays any of 6 High-Definition sources on 2 HDTV displays simultaneously with fast
switch
• When in Preview mode, the system will be treated as Switcher (2 HDMI output same
images at the same time)
• In Preview mode, it support View All (1 Main video source and 5 Sub video sources) and
PIP (1 Main video source and 1 Sub video source). 3D and 4K2K sources inputs are not
supported
• Note: View All is TDM (Time Division Multiplexing display)
• 3DTV Pass-Through
• Supports HDTV resolutions up to 4Kx2K (3840x2160@24/25/30 & 4096x2160 @30Hz)
• Supports Optical audio extraction
• Supports Optical audio sampling rate output up to 192kHz
• Supports data rate from 300Mbps to 3Gbps and Deep Color up to 1080p 30-bit
• Supports individual EDID or common EDID
• Supports LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH (Pass through),
Dolby TrueHD and DTS-HD Master Audio
• Supports 6 sets of Matrix preset functions for input/output setting
• Input port HDCP support Standard and Apple mode. The Apple mode selection to
guarantees the use of Apple devices
• Compliant with DVI source (Not supporting Deep color and Color space YCbCr 422/444)
• Supports OSD on output B under Preview Mode
3
3
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1POWER & LED: PRESS THE POWER KEY TO TURN ON THE DEVICE AND THE
LED WILL ILLUMINATED.
2IR WINDOW: IR RECEIVER RECEIVES REMOTE CONTROL SIGNAL FROM THE
REMOTE CONTROL INCLUDED IN THE PACKAGE.
3OUTPUT A ~ B: PRESS THESE OUT BUTTONS ONCE ALONG WITH ONE IN
BUTTONS TO SELECT INPUT SOURCE FOR SELECT OUTPUT DISPLAY.
4IN 1~6: PRESS THESE IN BUTTONS TO SELECT AN INPUT FROM 6 INPUT
SOURCES.
5MUTE: PRESS TO MUTE AUDIO SOURCE.
6TAKE: PRESS THIS BUTTON TO CONFIRM IN AND OUT SELECTION.
7CANCEL: PRESS THIS BUTTON TO CANCEL IN AND OUT SELECTION.
8ENTER: PRESS THIS BUTTON TO CONFIRM SELECTION.
9MENU: PRESS TO ENTER MENU OPTIONS.
10 +/-: PRESS TO MOVE UP / DOWN UNDER MENU OPTIONS.
11 ALL: PRESS TO SELECT ALL OUTPUTS TO DISPLAY WITH ONE INPUT SOURCE.
12 PRESET: PRESS THIS BUTTON, THE OLED MENU WILL SHOW PRESET, THEN
SELECT IN 1~6, PRESS “TAKE” TO CONFIRM THE SELECTION OR PRESS
“CANCEL” TO DESELECT.
13 LOCK: PRESS TO LOCK ALL BUTTON FUNCTIONS ON THE PANEL, PRESS AND
HOLD 5 SECONDS TO RESCISSION LOCK MODE.
14 MODE: TAKE MODE / REAL TIME MODE SWITCH.
15 LCM: DISPLAY INPUT AND OUTPUT SELECTION AND MENU OPTIONS.
6X2 HDMI MATRIX FAST SWITCH
IN 1IN 2IN 3IN 4IN 5IN 6 MUTE
OUT A OUT B
POWER
TAKE
CANCEL
ENTER
MENU
PRESET
ALL
MODE
LOCK
+
-
1 2 4 5
3
6 7 8 10 14112 115
9 11 13
4
4
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
4
6.2 Rear Panel
1HDMI IN: Connect from source equipment such as Blu-ray / DVD / PS3 player, Set-Top
Box or any HDMI equipped source device for input signal sending.
2HDMI OUT: Connect to HDMI TV / display or HD amplifier for output image and audio
or audio display.
3S/PDIF OUT: Connect to Audio sound system or Amplifier for digital output sound.
4SERVICE: This is reserved for firmware update use only.
5CONTROL: Connect to PC / Laptop with active internet service for Telnet / Web GUI
control with RJ-45 terminated cable.
6RS232: Connect to PC / Laptop to control the device.
7IR IN: Connect the IR receiver which contented in the package for receive IR signal
from the remote control.
8DC 5V: Connect the adapter with power cord which included in the package and
connect to AC wall outlet for power supply.
CONTROLSERVICE
HDMI IN HDMI OUT S/PDIF OUT
AB
123456AB RS232 IR IN DC 5V
1 2 3 4 5 6 7 8
5
5
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
EGE-UHD2-642FS
6×2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switching
5
6.3 REMOTE CONTROL
1POWER: PRESS POWER KEY TO TURN ON THE
DEVICE OR SET TO STANDBY MODE.
2OUT A~B: PRESS THESE OUT BUTTONS ONCE
THEN TO SELECT AN INPUT SOURCE FOR AN
OUTPUT DISPLAY.
3TAKE: PRESS THIS BUTTON TO CONFIRM IN AND
OUT SELECTION.
4MODE: PRESS TO SWITCH TO MATRIX OR
PREVIEW MODE.
MATRIX MODE: PRESS OUT A OR OUT B OR BOTH
THEN SELECT FROM INPUT 1~6 OR MUTE TO
SELECT INPUT SOURCES, PRESS TAKE AFTER
SELECTION TO CONFIRM OR PRESS CANCEL TO
UNDO.
PREVIEW MODE: SELECT VIEW ALL OR PIP MODE
BY ENTERING MENU PAGE.
SELECT TO VIEW ALL: PRESS FROM INPUT 1~6
OR MUTE TO SELECT INPUT SOURCES FOR MAIN
CHANNEL.
SELECT TO PIP MODE: PRESS FROM OUT A~B THEN PRESS FROM INPUT 1~6
OR MUTE TO SELECT INPUT AS MAIN OR SUB VIDEO SOURCES, PRESS ALL OR
SWAP TO SWITCH FROM MAIN OR SUB VIDEO SOURCES.
5PV DISP.: PRESS TO SWITCH PREVIEW DISPLAY ON AND OFF.
6SWAP: WHILE IN PIP MODE, PRESS TO SWAP MAIN OR SUB VIDEO SOURCE.
7MENU: PRESS TO ENTER MENU OPTIONS.
8ENTER: PRESS THIS BUTTON TO CONFIRM SELECTION.
9+/-: PRESS TO MOVE UP AND DOWN UNDER MENU OPTIONS.
10 ALL: PRESS TO SELECT ALL OUTPUTS TO DISPLAY WITH ONE INPUT SOURCE.
11 IN 1~6: PRESS THESE IN BUTTONS TO SELECT AN INPUT FROM 6 INPUT
SOURCES.
12 CANCEL: PRESS THIS BUTTON TO CANCEL IN AND OUT SELECTION.
13 PRESET: PRESS THIS BUTTON, THE OLED MENU WILL SHOW PRESET, THEN
SELECT IN 1~6, PRESS “TAKE” TO CONFIRM THE SELECTION OR PRESS
“CANCEL” TO DESELECT.
IN 3
IN 5
MUTEENTER -
OUT A
OUT B
MODE
PV DISP. PRESET IN 4
SWAP LOCK
ALLIN 1
TAKE IN 2
CANCEL
+MENU IN 6
CR-136
1
15
12
2
3
4
5
6
7
8
9
13
10
14
11
Indice
Altri manuali geratech Commutatore a matrice
