geratech EGE-UHD-1042FS Manuale utente
EGE-UHD-1042FS
10x2 HDMI 4K UHD Matrix Fast Switching
EGE-UHD-1042FS
10x2 HDMI 4K UHD Matrix Fast Switching
3
DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate.
Geratech assumes no responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Geratech assumes no responsibility for any inaccuracies that may be contained in
this document. Geratech also makes no commitment to update or to keep current the
information contained in this document.
Geratech reserves the right to make improvements to this document and/or product at any
time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval
system, or any of its part translated into any language or computer le, in any form or by
any means - electronic, mechanical, magnetic, optical, chemical, manual, or otherwise -
without express written permission and consent from Geratech.
© Copyright 2014 by Geratech.
All Rights Reserved.
Version 1.0 November 2014
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be trademarks of the
companies with which they are associated.
EGE-UHD-1042FS
10x2 HDMI 4K UHD Matrix Fast Switching
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack or install or operate this
equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of re, electrical shock and
injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through module openings or empty
slots, as you may damage parts.
• Do not attach the power supply cabling to building surfaces.
• Do not allow anything to rest on the power cabling or allow it to be abused by persons
walking on it.
• To protect the equipment from overheating, do not block the slots and openings in the
module housing that provide ventilation.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 22/06/15 Preliminary Release
EGE-UHD-1042FS
10x2 HDMI 4K UHD Matrix Fast Switching
5
CONTENTS
1. Introduction.....................................................................................1
2. Applications ....................................................................................1
3. Package Contents ..........................................................................1
4. System Requirements....................................................................1
5. Features...........................................................................................2
6. Operation Controls and Functions ...............................................3
6.1 Front Panel..................................................................................3
6.2 Rear Panel...................................................................................5
6.3 Remote Control ...........................................................................6
6.4 OSD Menu...................................................................................8
6.5 RS-232 Protocols ......................................................................12
6.6 IR Pin Denitions.......................................................................12
6.7 IP Searching Software Application and Installation ...................13
6.8 Telnet & RS-232 Commands.....................................................14
6.9 Telnet Control ............................................................................16
6.10 WebGUI Control ......................................................................18
7. Connection Diagram ....................................................................20
8. Specications ..............................................................................21
EGE-UHD-1042FS
10x2 HDMI 4K UHD Matrix Fast Switching
1
1. INTRODUCTION
This 10 by 2 HDMI UHD Matrix is an advanced solution for switching up to 10 HDMI
inputs to two HDMI outputs. It provides high performance pass-through of video/audio
and is capable of receiving and transmitting 300MHz/9Gbps bandwidth rate with no data
loss. It’s Fast Switching technology can greatly reduce the time required to swap between
inputs. Supporting the latest features you can be assured of reliable and high quality HDMI
distribution.
2. APPLICATIONS
• Showroom display & control
• Educational demo
• Installation usage
• Advertising display
3. PACKAGE CONTENTS
• 10 By 2 HDMI Matrix Fast Switch
• 1 x IR Extender
• 1 x Remote Control with Battery
• 1 x 5V/2.6A Power Adaptor
• 1 x Left & Right Ear Racks
• Operational Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as DVD/Blu-ray player and output HD display/Monitor with
HDMI cables.
EGE-UHD-1042FS
10x2 HDMI 4K UHD Matrix Fast Switching
2
5. FEATURES
• Supports UHD resolutions up to 4K2K@24/25/30Hz & 4K2K YUV420@60Hz
• Supports HDTV resolutions up to 1080@60Hz, ‘Deep Color’ 36/30/24-bit and PC
resolutions up to WUXGA@60Hz(RB)
• Supports 3D
• Supports pass-through of audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH,
DTS 2~5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master
Audio
• Supports EDID selection function
• Supports control via IR, RS-232, Telnet and WebGUI controls
• Input port HDCP support Standard and Apple mode. The Apple mode selection to
guarantees the use of Apple devices.
• Compliant with DVI source
Note: Supporting HDMI to DVI conversion when HDMI sources is non- deep color and
color space RGB.
EGE-UHD-1042FS
10x2 HDMI 4K UHD Matrix Fast Switching
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
10X2 HDMI MATRIX FAST SWITCH
IN 6 IN 7IN 8IN 9IN 10 OUT BTAKE
IN 1IN 2IN 3IN 4IN 5OUT ACANCEL
ENTER
MENU
PRESET
ALL
MUTE
LOCK
+
-
7
6
9
8
11
12
13
14
10 1554321
1POWER Button
Press this button to switch On or set the device to standby mode.
2POWER LED
This LED will illuminate in green when the device is power On and if it is switched to
standby mode the LED will turn red.
3IR Window
This IR Receiver receives the remote control signal from the package included remote
control only.
4IN 1~10
Press these IN buttons to select an input from the 10 input sources.
5OUT A/B
Press these buttons once a time along with an IN buttons to select an input source for
an output display. i.e. OUTA →IN1 →TAKE or OUTB →IN10 →TAKE.
6CANCLE
Press this button to cancel the IN/OUT selection and during any selection under MENU.
7TAKE
Press this button to conrm the selection of an IN and an OUT button. If this button is
not pressed the IN & OUT selection will not be executed.
8MENU
Press to enter into the menu selection.
9ENTER
Press to conrm the selection.
10 +/-
Press these buttons to move up/down under menu selection.
11 PRESET
Press this button to recall the preset setting from 1~10. Press and select from IN1~10
then press TAKE to conrm the recall selection or press CANCEL to exit the selection.
To reset the Preset setting, enter into menu and select Preset setting from IN1~10 then
EGE-UHD-1042FS
10x2 HDMI 4K UHD Matrix Fast Switching
4
press OUTA and select an input from IN1~10 then press OUTB and select an input
from IN1~10 again and press ENTER to conrm the selection. eg. To preset 2’s gure,
MENU → ENTER → Matrix Preset →Enter→Preset2 →IN2 →OUTA →IN8 →OUTB →
IN7 →ENTER
12 ALL
Press this button to select all outputs to display with an input source. e.g. To select all
output with input source 3. ALL →IN3
13 MUTE
Press this button to mute video and audio on OUT A or B or on all output. e.g. To mute
output A OUTA →MUTE
14 LOCK
Press this button to lock all button functions on the panel to unlock, press the button and
hold for 3 seconds.
15 LCM
Displaying Input and Outputs selection and menu selection.
EGE-UHD-1042FS
10x2 HDMI 4K UHD Matrix Fast Switching
5
6.2 Rear Panel
CONTROLSERV.
HDMI IN HDMI OUT
12345678910A BRS232 IR IN DC 5V
7654321
1HDMI IN
Connect from source equipment such as Blu-ray/DVD/PS3 players, Set-Top-Box or any
HDMI equipped source device for input signal sending.
2HDMI OUT
Connect to HDMI TV/display or HD Amplier for output image and or audio display.
3SERV.
This slot is reserved for rmware update use only.
4CONTROL
Connect from PC/Laptop with active internet service for Telnet or WebGUI control with
RJ-45 terminated cable.
5RS-232
Connect from PC/Laptop for RS-232 command sending to control the device.
6IR IN
Connect the IR Receiver included in the package for IR signal receive from the included
remote control.
7DC 5V
Connect the adaptor included in the package and connect to AC wall outlet for power
supply.
Altri manuali per EGE-UHD-1042FS
1
Indice
Altri manuali geratech Interruttore
