German pool KTT-209 Manuale utente
P.1
KTT-209Stainless Steel Travel Kettle
Please read these instructions and warranty information carefully
before use and keep them handyfor future reference.
Online Warranty Registration
USER MANUA L
P.2
請即進行保用登記﹗
有關保用條款細則，請看本說明書最後一頁。
Please register your warranty information now!
For Warranty Terms & Conditions,
please refer to the last page of this user manual.
P.3
Content
Safety Instruction
Product Structure
Operating Instructions
Cleaning and Maintenance
Troubleshooting
Specications
Warranty
04
05
06
09
10
10
19
P.4
Safety Instruction
This User Manual contains safety instructions for the correct use of this product. Therefore, please
read the Manual carefully before use to avoid damage and danger caused by improper use. All safety
instructions are designed for your safety.
1. Thisproductcomplieswiththeelectricalproducttechnicalcerticationcodeandrelatedsafety
regulations.
2. Before use, check whether the rated voltage on the product rating plate is consistent with the
voltage you use.
3. Please use a grounded power supply to ensure personal safety.
4. When using this product, place it on a stable platform and out of reach of children.
5. Check the plug and power cord carefully. If any damage is found, please have it repaired or
replaced by a professional.
6. Don’t use this product on (or near) the surface of heat-liable objects such as carpets, plastics, etc.
Objects that are susceptible to steam should not be placed above the product.
7. When the product is used, a large amount of steam will be ejected from the steam port. Beware
for the steam.
8. Please keep the surface of the heating plate of the machine clean. After using for a period of time,
the dirt on the surface of the heating plate must be cleaned in time.
9. Don’timmersetheproductinwaterorallowanyliquidtoowintotheproductduringcleaningto
avoid danger.
10. If the power cord is damaged, it must be replaced by a professional from the manufacturer, or its
service department or similar department to avoid danger.
11. If there is no water in the kettle body, please do not heat it. Otherwise it will affect the service life of
the product.
12. The product must be attended to during the process of boiling water. Please keep children away
and do not let children pull the power cord.
13. Don’t immerse the power cord, plug, machine, etc. in water or other liquids to prevent damage to
the product and electric shock.
14.Ifyoundthatthebody,baseorotherpartsaredamaged,don’tuseitandreturnittothe
manufacturer for repair.
15. When adding water to the body, do not exceed the maximum water mark. If too much water is
added,thewaterwilloverowwhenitisboiling.
16. During the work, please do not touch the body with your hands to avoid being burnt.
17. When pulling out the power cord from the socket, please hold on to the plug. Do not forcibly pull the
power cord. Otherwise, it may cause electric shock or short circuit.
18. Don’t plug or unplug the power cord with wet hands. Otherwise, it may cause a short circuit or
electric shock.
19. Anyone except for professional repair technicians shouldn’t disassemble, repair or modify the
machine.Otherwiseitmaycausereandelectricleakage.
20.Ifthekettleislledtobetoofull,boilingwatermaybeejected.
21. Note: In order to avoid the danger of accidental resetting of the thermal circuit breaker, the
appliance cannot be powered by an external switching device, such as a timer or connected to a
circuit that is on and off periodically by the common components.
P.5
Product Structure
1. Lid
2. Pot Mouth
3. Spout
4. Stainless Steel Body
1. Boiling Indication Light
2. Heat indication Light
3. Tea Indication Light
4. Noodle Indication Light
5. Hotpot Indication Light
6. Keep Warm Indication Light
7. Time/Temperature Setting Button
8. Function/Cancel Button
9. LED Display
5. Handle Ring
6. Extendable Handle
7. Kettle Base
8. Control Panel
9. Bottom Cover
10. Power Cord Outlet (Back)
11. Plastic Bowl
Main Body
Control Panel
1.
6.
11.
2.
3.
4.
5.
7.
8.
1. 4.
2. 5.
3.
7. 8.
9.
6.
9.
10.
P.6
Operating Instructions
How to Assemble the Product:
1. Rotate to separate the Plastic Bowl and the Stainless Steel Body.
2. Remove the Lid and take out the Kettle Base from the Stainless Steel Body.
3. Screw the Kettle Base into the Stainless Steel Body until the triangle reach
the indicator.
4. Make sure all components are securely fastened.
How to Store the Product:
1. Rotate to separate the Kettle Base and the Stainless Steel Body.
2. Remove the Lid and put the Kettle Base inside the Stainless Steel Body. Put the Lid in place.
3. Screw the Plastic Bowl into the Stainless Steel Body.
4. Make sure all components are securely fastened.
Watch the video clip
1. 2. 3.
1. 2. 3.
P.7
Operating Instructions
How to Boil Water
1. Add an appropriate amount of water into the Stainless Steel Body not exceeding the maximum
scaleof0.5L(toavoidboilingwateroverowingfromthespoutduringtheboilingprocess).
2. Select the “Boil” function and the Control Panel shows water temperature by default; the “Boil
FunctionIndicatorLight”ashesandtheproductenterstheworkingmodeafter5seconds,“Boil
Function Indicator Light” is always on.
3. When the work is completed, the buzzer gives a beep sound and then enters the “Keep Warm”
function to keep warm.
How to Adjust Time
1. Press the “Function/Cancel” button to select “Tea”, “Noodle” or “Hotpot” function, and the Control
Panelshowsthedefaulttimeofselectedfunction;theindicatorlightashes.
2. Press the “Time/Temperature” button to adjust the heating time with the range of 5-120 minutes.
Each press of button will have time increasing by 5 minutes, and the long press leads to fast
increase by 10 minutes.
3. After 5 seconds, the product automatically enters the working mode and the indicator light is
always on.
4. When the work is completed, the buzzer gives a beep sound and then enters the “Keep Warm”
function.
How to Use the Control Panel
Power on the product and the buzzer gives a beep sound to enter Standby Mode. The Control Panel is
always lit and shows “OFF”. Press the “Function/Cancel” Button to select the functions: Boiling, Heat,
Tea, Noodle, Hotpot, and Keep Warm.
24
.
C
0.
15
OFF
P.8
Operating Instructions
How to Adjust Keep Warm Temperature
1. Press the “Function/Cancel” Button to select the “Warm” function and the Control Panel shows the
currenttemperaturebydefault;the“KeepWarmIndicationLight”ashes.
2. The default keep warm temperature is 60°C. Press the “Time/Temperature” Button to adjust the
temperature with the range of 30-90°C. Each press of the button will increase temperature by
1°C, and the long press leads to increase by 5°C.
3. After 5 seconds, the product automatically enters working mode and the “Keep Warm Indication
Light” is always on. The defaulted keep warm time is 24 hours.
Note: Please keep the lid open when cooking food tends to foam up.
List of Function Default Parameter
Function Default Working
Time
Heating
Temperature
Default
Keep-Warm
Temperature
Working Time
Adjustable
Range
Keep-Warm
Temperature
Adjustable
Range
Boil / 100°C 60°C / 30-90°C
Heat 5 minutes 100°C 60°C / 30-90°C
Tea 15 minutes 100°C 60°C 5-120 minutes 30-90°C
Noodle 10 minutes 100°C 60°C 5-30minutes /
Hotpot 90 minutes 100°C 60°C 30-120minutes /
Keep
Warm 24hours 60°C 60°C / 30-90°C
60
.
C
P.9
Regular Cleaning
˙ Wash immediately after each use.
˙ Thoroughly clean the inside of the kettle, the spout and the lid with a little neutral detergent and a
non-abrasive sponge.
˙ Thekettlebasecannotbeushedorsplashed.Wipethebodyandbasewithaslightlydampcloth
and dry with a dry cloth.
˙ Please wait until the inside and outside of the kettle are completely dry before folding.
Descaling
1. Pour 0.2L edible white vinegar into the product and let it soak for more than 1 hour in the kettle.
2. Pour the solution out of the kettle and wipe off the remaining sediment with a damp cloth.
3. Add water, bring it to a boil and discard the water in the kettle. Rinse it with water for 4-5 times. The
kettle can be used again.
4. Repeat the above steps if necessary.
5. Wipe the exterior of the kettle with a damp cloth wrung out.
Cleaning and Maintenance
1. In order to extend the service life of the product, the mineral deposits in the
kettle should be cleaned regularly.
2. Unplug the power cord and allow the kettle to cool down before cleaning.
3. Don’t use steel balls and any chemical or abrasive powder cleaner to clean
the exterior surface of the kettle.
Watch the video clip
P.10
Troubleshooting
Note: If the problem was not solved by the above troubleshooting, please contact our Customer
Service. It is strictly forbidden for non-professionals to disassemble this machine.
Specicationsaresubjecttochangewithpriornotice.
If there is any inconsistency or ambiguity between the English and the Chinese version, the Chinese
Version shall prevail.
Refer to www.germanpool.com for the most updated version of the User Manual.
Specications
Malfunction Probable Cause Solution
Kettle does not start
Switchdoesnotipafterwater
is boiled
Switchippedbeforewater
is boiled
Kettle does not heat
Not plugged in properly
Function not yet selected Choose appropriate function
Thermostat failure
Thermostat failure
Water scale too thick
Circuit failure
Descale kette
Check the power connection
Contact Customer Service and Repair Center
Contact Customer Service and Repair Center
Contact Customer Service and Repair Center
Contact Customer Service and Repair Center
Contact Customer Service and Repair Center
Contact Customer Service and Repair Center
Contact Customer Service and Repair Center
Circuit failure
Base heating plate failure
Circuit failure
Circuit failure
Model KTT-209
Voltage 100-240V
Power 230W-600W
Product Dimensions Unfolded: (H)165 x (W)115 x (D)115 mm
Folded: (H)110 x (W)115 x (D)115 mm
Net Weight 0.75 kg
Capacity 500ml
Indice
Altri manuali German pool Bollitore
German pool
German pool KTF-218 Manuale utente
German pool
German pool ECO-15 Manuale utente
German pool
German pool KTT-109 Manuale utente
German pool
German pool KTG-120 Manuale utente
German pool
German pool KTT-009 Manuale utente
German pool
German pool KTV-215 Manuale utente
German pool
German pool KTM-104 Manuale utente
German pool
German pool KTF-212 Manuale utente
German pool
German pool KTW-115-SC Manuale utente
German pool
German pool BLG-310 Manuale utente
