Get Packed 2-GPCS-133SD Manuale utente
1
SEMI-AUTOMATIC
CARTON SEALING MACHINE
2020-04-30
OPERATION MANUAL
2-GPCS-133SD
3
1GENERAL SAFETY INSTRUCTIONS
1.1 Basic Operation ..................................................................................................................5
1.2 Basic Safety Precautions ....................................................................................................5
1.3 Safety Instructions Governing Specific Operational Phases ..............................................6
1.4 Warning of Electrical Dangers ............................................................................................7
1.5 Grounding Instructions Shall Include the Following ..........................................................8
1.6 Before Operating ................................................................................................................9
1.7 During Operation ...............................................................................................................9
1.8 After operating ...................................................................................................................9
1.9 Signs .................................................................................................................................10
2MACHINE INFORMATION
2.1 Areas of Application .........................................................................................................11
2.2 Environmental Information .............................................................................................11
2.3 Machine Description ........................................................................................................12
2.4 Safety Devices ..................................................................................................................12
2.5 Technical Specification .....................................................................................................14
2.6 Identification Data of the Machine ..................................................................................16
3BEFORE OPERATING THE MACHINE
3.1 Shipping ............................................................................................................................17
3.2 Transportation & Unload Machine from Pallet ...............................................................17
3.3 Operation Space ...............................................................................................................18
3.4 Construction and Units ....................................................................................................19
3.5 Control Panel ....................................................................................................................19
3.6 Tape Threading ................................................................................................................21
4
4Adjustments
4.1 Change Tape - Upper .......................................................................................................22
4.2 Change Tape - Lower ........................................................................................................23
4.3 Table Height Adjustment .................................................................................................23
4.4 Box Height Adjustment ....................................................................................................24
4.5 Box Width Adjustment .....................................................................................................24
4.6 Squeezer Roller Adjustment...............................................................................................25
5TROUBLE SHOOTING…………………………………………………………………………………………… 26
6MAINTENANCE…………………………………………………………………………….…………………………. 27
7ELECTRIC WIRING DIAGRAM & PART………………………………………..…………… 29
8PART LIST……………………………………………..……………………………………………………………………… 33
5
1. GENERAL SAFETY INSTRUCTIONS
1.1 Basic Operation
The manual and the safety remarks are to be read before use. The operator manual
should be kept with the machine at all times. Intervals for maintenance and
inspections are to be adhered to.
This machine was built with state of the art technology and rigid adherence to safety
standards.
Unless used properly, it can cause injury to operators or persons in close proximity to
the machine. In addition, improper use can cause damage to the machine or property
around the machine.
1.2 Basic Safety Precautions
The user is to be instructed in all other generally applicable legal and other mandatory
regulations relevant to accident prevention and environmental protection in addition
to the operating instructions.
For safety reasons, long hair must be tied back or otherwise secured, garments must
be close fitting and no jewelry may be worn.
Use protective equipment whenever required by circumstances or by law.
Carefully observe all safety instructions and warnings attached to the machine and
make sure that they are always complete and perfectly legible.
Always make certain that persons being trained and instructed in working on or with
the machine are permanently supervised by an experienced person.
Work on the electrical system and equipment of the machine is only to be carried out
by a skilled electrician or by persons under the supervision and guidance of a skilled
electrician and in accordance with the rules and regulations of electrical engineering.
6
1.3 Safety Instructions Governing Specific Operational Phases
Avoid any operation mode that might be unsafe.
All necessary precautions to ensure that the machine is only used being in a safe and
reliable state are to be taken. The machine is only to be operated if all protective and
safety devices, including removable safety devices, emergency shut-off equipment,
noise-protection elements and exhaust systems are in right place and fully functional.
The machine is to be checked for damage and defects at least once per work shift. Any
changes including the working behavior of the machine are to be reported to
competent persons immediately. If necessary, the machine is to be stopped and
locked immediately.
In case of any malfunction the machine must be stopped and locked until the defect
has been eliminated.
Generally make sure that nobody is at risk before starting up the machine.
All personnel that will be operating this machine should be thoroughly trained in all
phases of operation and safety.
Always tighten unscrewed connections after maintenance and repair.
After completing maintenance and repair all safety devices removed for setting up or
repairing the machine must be reinstalled and checked for functionality prior to
putting the machine back into service.
To minimize the environmental impact all consumables and replaced parts must be
disposed of safely.
Before starting the machine check that the accessories have been stowed away safely.
Do not attempt any operation that may be a risk to the stability of the machine.
7
1.4 Warning of Electrical Dangers
Immediately remove power to the machine in case of trouble in the electrical system.
Replace a fuse with one with the same style and ratings; pay particular attention to
matching the specified current.
Any electrical work performed on the equipment must be conducted by a skilled
electrician or under the supervision of a skilled electrician. All work must be observed
good electrical engineering practice and follow safety rules and local wiring standards.
Inspect the electrical equipment of the machine at regular intervals. Tighten any loose
connections. Check wiring for scorch marks; replace scorched wiring and determine
and correct the reason for the overheating.
When working on live equipment, ensure that a second person is available to cut
power in case of an emergency. When appropriate, secure the working area with
safety tape and a warning sign. Use insulated tools for electrical work.
Before working on high-voltage assemblies, turn off the power supply. Carefully
discharge the supply cable and short-circuit any energy-storage components such as
capacitors.
If the equipment was moved, carefully refit and refasten all parts removed for
transport before reapplying power.
Before moving the machine, remember to disconnect the power cable.
8
1.5 Grounding Instructions Shall Include the Following
This product must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock. This product is equipped with a cord that has a
grounding wire and an appropriate grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
If repair or replacement of the cord or plug is necessary, connect the ground wire to
the ground terminal of the plug. The wire with green insulation (with or without
yellow stripes) is the grounding wire.
Check with a qualified electrician or service person if the grounding instructions are
not clear or if in doubt about the proper grounding of the machine. Do not modify the
plug provided; if it will not fit the power outlet, have the proper outlet installed by a
qualified electrician.
This product is designed for use on a nominal AC circuit and has a grounding plug.
DANGER!
Improper installation of the grounding can result in electrocution.
9
1.6 Before Operating
Verify that the power line voltage is correct.
The machine must be properly grounded to avoid a shock hazard. All wiring must be in
accordance with local wiring standards.
The Carton Sealing machine can only be operated with OPP tape.
1.7 During Operation
The size of the package should be under dimension in specification list.
While running, check the unit for any unusual sounds or smoke emissions.
Keep away from the moving part like belt and blade of tape head. Do not put your
hands or body around belt or blade of tape head when the machine is running.
1.8 After operating
Remove dust and dirt from the unit
Turn off the power when the machine is not in use.
10
1.9 Signs
Caution!
Electric Shock Hazard.
Caution!
Hot Surface.
Caution!
Moving Parts Can Crush Hand.
Caution!
Pinch Point Entanglement
Caution! Blade.
Cutting of Fingers or Hand
Wear Eye Protection
Refer to Operator Manual
11
2. MACHINE INFORMATION
2.1 Areas of Application
Packaging Limitation
It’s not possible to pack:
Products larger or heavier than that allowed.
Wet Products
Flammable products
Explosive products
Agri-foodstuffs
Pharmaceuticals
Hazardous products
2.2 Environmental Information
The strapping machine shall be installed in the following conditions:
Supply voltage: +-10% nominal supply voltage
Source frequency: +-10% nominal frequency
Ambient temperature: 5°C - 40°C (41℉-104℉).
Relative humidity: not exceed 35~85%RH
Please provide a suitable illumination around the machine for safety operation.
Conditions For Use
Make sure there is room for easy application and maintenance
The machine must be installed in a closed, well-ventilated area where there are no
explosions or fire hazards Position the machine in a place free of humidity, flammable
materials, gas or explosives. Make sure that it is level.
Please do not spray water or wet wipe machine body.
Noise - characteristic values
Indice
Altri manuali Get Packed Attrezzature per l'imballaggio
