Get Packed GPPW-1500B Manuale utente
PALLET STRETCH WRAPPING MACHINE
MODEL: TMD-P26B
OPERATION MANUAL
20220406 ERP part no.
GPPW-1500B
OPERATION MANUAL
TABLE OF CONTENT
1. GENERAL.................................................................................................1
1.1 NOTICE OF INSTALLATION......................................................1
1.2 NOTICE OF OPERATION..........................................................2
2. SPECIFICATION ......................................................................................3
2.1 SPECIFICATION TABLE............................................................3
2.2 MACHINE DIMENSION..............................................................4
2.3 MACHINE DESCRIPTION .........................................................5
3. OPERATION DESCRIPTION ...................................................................6
3.1 INSTALLATION ..........................................................................6
3.2 REMINDER OF INSTALLATION ................................................8
3.3 OPERATION OF CONTROL PANEL..........................................9
3.4 OPERATION DESCRIPTION...................................................10
3.5 OPERATION CYCLE………………………………………………12
4. ELETRICAL............................................................................................15
4.1 ELECTRIC CAPACITY.............................................................15
4.2 ELECTRIC DIAGRAM..............................................................16
5. TROUBLE SHOOTING...........................................................................20
5.1 GENERALADJUSTMENT........................................................21
5.2 TROUBLE SHOOTING ............................................................22
6. PART LIST..............................................................................................23
6.1 SEAT........................................................................................23
6.2 TOWER....................................................................................25
6.3 ELEVATOR...............................................................................27
6.4 CONTROL BOX .......................................................................30
1
1. GENERAL
1.1 NOTICE OF INSTALLATION
To make sure a safe and correct operation, please check conditions below
before install the machine:
1) Power source capacity must be equal of the machine need.
2) Machine standard power is AC110v/230v (+- 10%)
3) Machine standard power Hertz is 50/60 Hz. (+- 2%)
4) Machine is workable under the temperature between 0℃- 45℃
5) Make sure the wire is tidy on the ground.
6) There should not have vibration beside the machine during the
installation, and make sure to ground is flat.
7) Read and follow the instruction of the installation.
2
1.2 NOTICE OF OPERATION
To have good protection for the operator, please make sure the following
conditions:
1) Before operating, please read the machine operational manual carefully.
2) Make sure there is no object put on the power cable.
3) Make sure there is no object put on the upper elevator unit.
4) Avoid any damp object or water around the electric parts.
5) Avoid film winded into the turntable.
6) Do not stand on or across the machine during operation.
7) When the problem occurs, please check the section of 5 Trouble shooting
3
2. SPECIFICATION
2.1 SPECIFICATION TABLE
Model
TMD-P26B
Turntable Speed
10 RPM
Turntable dia.
1500mm
Max. Wrapping height
2200mm
Max. Wrapping size
1050x1050mm
Max. Loading weight
1200Kg
Film stretch (%)
Infinite/manual adjust
Max. film spec.
∮250x500mm
Turntable height
76mm
Ramp (slope) spec.
1165x1000mm
Machine size
2300x1500x2346 mm
Machine net weight
335Kg
Standard option:
▪1.65 meters turntable dia. (Max Loading Weight 1650kg).
▪2.6 meters wrapping height
▪3.0 meters wrapping height
▪Ramp
4
2.2 MACHINE DIMENSION
5
2.3 Machine Description
6
3. OPERATION DESCRIPTION
3.1 INSTALLATION
1) Apart the wooden package. Avoid damaging the machine.
2) a) Loosing 4 screws at the end of masters。(Do not unscrew the sliding
shaft, leave inside the track).
b) Lift up the master (Step 1).
c) Sliding the master towards turntable, until the sliding shaft move into
locking position (Step 2).
d) Master is in position to be fully lifted and tighten all screws (Step 3).
1
..
2
..
3
..
7
3) Connect the motor plug to the main control, by referring to the diagram
below. Machine is ready to be connecting to the power cable with the
socket by an 110V/230V power.
8
3.2 REMINDER OF INSTALLATION
Please pay attention on:
Tower Installation
When installing the tower, the engineers must make sure all 4 screws are
properly installed underneath the tower. 1 by carriage side, and 3 by the
motor sides.
Motor Cover
After all the connections are complete, please carefully install the motor
cover to cover up all the wire connections and the motor on the base of the
machines.
Indice
