Giga-tronics 3000-44 Manuale utente
Manual 07500610 Model 3000-44
Page 1
Operation Manual
Model 3000-44
2(2x64) 2-wire Matrix
90400650
Manual 07500610 Model 3000-44
Page 2
Operation Manual
All technical data and specifications in this publication are subject to change without prior notice and do
not represent a commitment on the part of Giga-tronics, Incorporated.
© 2011 Giga-tronics Incorporated. All rights reserved. Printed in the U.S.A.
CONTACT INFORMATION
Giga-tronics, Incorporated
4650 Norris Canyon Road
San Ramon, California 94583
Telephone: 800.726.4442 (only within the United States)
925.328.4650
Fax: 925.328.4700
On the Internet: www.gigatronics.com
Warranty
Giga-tronics Series 3000 Switching Modules are warranted against
defective materials and workmanship for three yearsfrom date of shipment,
or as detailed in the warranty section of this manual. Giga-tronics will, at its
option, repair or replace products that are proven defective during the
warranty period. This warranty DOES NOT cover damage resulting from
improper use, nor workmanship other than Giga-tronics service. There is no
implied warranty of fitness for a particular purpose, nor is Giga-tronics liable
for any consequential damages. Specification and price change privileges are
reserved by Giga-tronics.
Manual 07500610 Model 3000-44
Page 3
Operation Manual
Regulatory compliance information
This product complies with the essential requirements of the following applicable European
Directives, and carries the CE mark accordingly.
89/336/EEC and 73/23/EEC
EMC Directive and Low Voltage Directive
EN61010-1 (1993)
Electrical Safety
EN61326-1 (1997)
EMC –Emissions and Immunity
Manufacturer’s Name:
Manufacturer’s Address
Giga-tronics, Incorporated
4650 Norris Canyon Road
San Ramon, California 94583
U.S.A.
Type of Equipment:
Model Series Number
Switching Module
3000-44
Declaration of Conformity on file. Contact Giga-tronics at the following;
Giga-tronics, Incorporated
4650 Norris Canyon Road
San Ramon, California 94583
Telephone: 800.726.4442 (only within the United States)
925.328.4650
Fax: 925.328.4700
Manual 07500610 Model 3000-44
Page 4
Operation Manual
Record of Changes to This Manual
Use the table below to maintain a permanent record of changes to this document. Corrected
replacement pages are issued as Technical Publication Change Instructions (TPCI). When you
are issued a TPCI, do the following:
1. Insert the TPCI at the front of the manual binder.
2. Remove the pages from the manual binder that are noted in the TPCI.
3. Replace the page(s) removed in the previous step with the corrected page(s).
4. Record the changes in the table below.
TPCI
Number
TPCI Issue
Date
Date Entered
Comments
Manual 07500610 Model 3000-44
Page 5
Operation Manual
Revision History
Revision
Description of Change
Chg Order #
Approved By
A
Initial Release
B
Updated
C
Updated
D
Updated
E
Updated 11/10
F
Reformatted 3/12
RCW
Manual 07500610 Model 3000-44
Page 6
Operation Manual
Contents
Contents........................................................................................................................................................6
Chapter 1 Introduction .................................................................................................................................8
1.1 Safety and Manual Conventions.........................................................................................................8
1.1.1 Product Reference.......................................................................................................................8
1.1.2 Personal Safety Alert...................................................................................................................8
1.1.3 Equipment Safety Alert ...............................................................................................................8
1.1.4 Notes ...........................................................................................................................................8
1.1.5 Electrical Safety Precautions ....................................................................................................... 8
Chapter 2 Configuration Table...................................................................................................................... 9
Chapter 3 Functional Description ...............................................................................................................10
3.1 Introduction......................................................................................................................................10
3.2 General Description..........................................................................................................................10
Chapter 4 Block Diagram ............................................................................................................................11
Chapter 5 Controls and Indicators ..............................................................................................................12
5.1 VXI Logical Address...........................................................................................................................12
5.2 LEDs...................................................................................................................................................12
5.2.1 “BUS” LED..................................................................................................................................12
5.2.2 “PWR” LED.................................................................................................................................12
Chapter 6 Internal Settings ......................................................................................................................... 13
6.1 Fuse...................................................................................................................................................13
6.2 VXIbus Interrupt Level Selection.........................................................................................................13
Chapter 7 Specifications .............................................................................................................................14
Chapter 9 Register Map ..............................................................................................................................15
9.1 Functional Description......................................................................................................................15
9.2 Programming ....................................................................................................................................15
Chapter 10 Connector Pin Configuration....................................................................................................21
Chapter 11 Option “M” Register Maps.......................................................................................................35
Chapter 12 Front Panel Connections..........................................................................................................40
12.1 Input Signals ...................................................................................................................................40
12.2 OUTPUT SIGNALS............................................................................................................................42
Manual 07500610 Model 3000-44
Page 7
Operation Manual
12.2.1 128 x 2 MATRIX ( 90400650 ) .................................................................................................42
12.2.2 DUAL 64x2 MATRIX ( 90400650-001......................................................................................42
12.2.3 128 x 2 MATRIX ( 90400650 –101 ) –Extra Output Connections...........................................42
Manual 07500610 Model 3000-44
Page 8
Operation Manual
Chapter 1 Introduction
1.1 Safety and Manual Conventions
This manual contains conventions regarding safety and equipment usage as described below.
1.1.1 Product Reference
Throughout this manual, the term “Common Core Switching Platform, Series 8800” refers to all models
of within the series, unless otherwise specified.
1.1.2 Personal Safety Alert
WARNING: Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
1.1.3 Equipment Safety Alert
CAUTION: Indicates a situation which can damage or adversely affect the product or
associated equipment.
1.1.4 Notes
Notes are denoted and used as follows:
NOTE: Highlights or amplifies an essential operating or maintenance procedure, practice, condition or
statement.
1.1.5 Electrical Safety Precautions
Any servicing instructions are for use by service-trained personnel only. To avoid personal injury, do not
perform any service unless you are qualified to do so.
For continued protections against fire hazard, replace the AC line fuse only with a fuse of the same
current rating and type. Do not use repaired fuses or short circuited fuse holders.
WARNING
!
CAUTION
Manual 07500610 Model 3000-44
Page 9
Operation Manual
Chapter 2 Configuration Table
Module 3000-44, (2x128) Standard Module
PL90400650
Assy 90400650
Module 3000-44 Option 1, (2x128) Module, also known as Option “M”, has two
additional inputs on DB
PL90400650-101
Assy 90400650-101
Module 3000-44, 2(2x64) Module
PL90400650-001
Assy 90400650-001
Schematics
MB PL85003420
Assy 85003420
SCH85003420
DB PL85003430
Assy 85003430
SCH85003430
Manual 07500610 Model 3000-44
Page 10
Operation Manual
Chapter 3 Functional Description
3.1 Introduction
This User Guide provides a basic description of the 3000-44 2 x 128 Coaxial Switch Matrix module. Also
included are installation and input connection procedures, programming information, service and
maintenance information.
3.2 General Description
This module is a dual wire 2 x 128 matrix switch. Each relay in the module is individually controlled. Any
and all relays can be closed. The module is designed to support precision testing designs such as ATE.
This module is ideal for high quality multi-channel measurement or stimulus switching. Each relay is
coaxially shielded to a separate analog ground plane. The Interface and mechanical construction meets
the specification of the VXIbus System Specification, rev 1.2 through 1.4. This module also has a factory
option for two independent 64 x 2 matricies.
Indice
Altri manuali Giga-tronics Interruttore
