Gigabyte AirCruiser G Manuale utente
GN-AP01G
AirCruiser G Access Point
User’s Manual
www.gigabyte.com.tw
June. 2005
Revision 1.0
GN-A11G Wireless LAN Access Point
i
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
GIGABYTE declares that GN-AP01G (FCC ID: JCK-GN-AP01G) is limited in CH1~CH11 for 2.4GHz by
specified firmware controlled in U.S.A.
GN-AP01G AirCruiser G Access Point
ii
Contents
Chapter 1 Introduction............................................................................................ 1
Overview............................................................................................................... 1
Features................................................................................................................ 1
Package Contents...................................................................................................2
GN-AP01G Rear Panel............................................................................................. 2
Status LEDs........................................................................................................... 3
Chapter 2 QUICK INSTALLATION.............................................................................. 4
System Requirements .............................................................................................. 4
Planning Your Network Environment ............................................................................4
Hardware Installation................................................................................................5
Chapter 3 Configuration - Using A Web-Browser.......................................... 6
Using Web-based Configuration.................................................................................. 6
Configuring theAdapter forAccess Point ModeAccess ....................................................7
Chapter 4 Access Point Manager............................................................................ 23
Installing theAccess Point Manager........................................................................... 23
Using theAccess Point Manager............................................................................... 28
Upgrade Firmware.................................................................................................47
UninstallAP Manager Utility..................................................................................... 49
Chapter 5 Troubleshooting.................................................................................... 51
Appendix A: Glossary........................................................................................... 52
Appendix B: Specifications ................................................................................... 56
Physical Interface..................................................................................................56
Specifications.......................................................................................................56
Appendix C: PC Configuration............................................................................... 57
TCP/IP Settings Under Windows 2000........................................................................ 57
TCP/IP Settings under Windows XP........................................................................... 60
Appendix D Warranty..................................................................................... 63
GN-AP01G AirCruiser G Access Point
1
Chapter 1 Introduction
Overview
Thank you for purchasing Gigabyte AirCruiser G GN-AP01G Wireless Access Point. The GN-AP01G uses
the IEEE 802.11g standard which has 54Mbps bandwidth instead of standard 802.11b or standard Wi-Fi
which has 11Mbps bandwidth. The AirCruiser G GN-AP01G Wireless Access Point supports both 802.11b
and 802.11g clients.
The GN-AP01G Wireless Access Point is able to connect to either IEEE 802.11g or IEEE802.11b.
Providing transmission speeds of up to 54Mbps, the GN-AP01G allows users to share network resources,
retrieve emails, download large files, conduct a video conference, and distribute or display digital photos,
videos or MP3 files.
Furthermore, the Access Point supports up to 128-bit WEP encryption to safeguard your privacy on-line.
GN-AP01G not only enables simple and easy installation and usage, but also provides you useful AP
Manager Configuration Utility and Web-based configuration.
Features
¾Complies with IEEE 802.11g and 802.11b standards
¾Data rates up to 54Mbps
¾Supports 64-bit /128-bit WEP encryption, WPA, WPA-PSK, 802.1x
¾Supports WDS
¾Supports dynamic & static IP address configuration
¾Easy web management
¾Useful AP Manager Configuration Utility
¾Web-based firmware upgrade
¾Dynamically adjusts transmission rates for optimum performance
GN-AP01G AirCruiser G Access Point
2
Package Contents
Before installing, please examine the components to ensure that none were damaged during shipping. The
package contents of the GN-AP01G shall include:
;GN-AP01G AirCruiser G Access Point
;Power Adapter
;Installation CD containing User’s Guide
;Quick Installation Guide
;Ethernet Cable
If there are any missing or damaged parts, please contact your local distributor or dealer immediately. If a
replacement unit is needed, return the device with the original packing material, otherwise the warranty will
be void.
GN-AP01G Rear Panel
1. Power Socket
2. Ethernet LAN Port
10/100Mbps LAN connection with auto-sensing and MDI/MDIX
3. Antenna
Removable high gain 2.4GHz dipole-type
XYZ
GN-AP01G AirCruiser G Access Point
3
Status LEDs
LED’s
Please see the table below for a description of the LEDs:
Label Activity Description
Power On (Green)
Off Power is supplied to the Access Point
Power is NOT supplied to the Access Point
WLAN On (Green)
Blink Wireless link is connected
Data is being transmitted wirelessly
LAN On (Green)
Blink LAN port has detected a link with a 10/100 Mbps device
Data is being transmitted
GN-AP01G AirCruiser G Access Point
4
Chapter 2 QUICK INSTALLATION
System Requirements
Suggested Specifications for Wireless LAN Access Point installation:
•A PC, Notebook or Macintosh Computer with installed 802.11b/g wireless LAN adapter
•An Ethernet router or hub
•Ethernet patch cable
Planning Your Network Environment
You can build your network environment as the picture above. After you set up the access point, you can
surf the internet by wireless from your PC, PDA and Notebook which built-in wireless module.
GN-AP01G AirCruiser G Access Point
5
Hardware Installation
Follow the steps below when installing your Access Point(s).
Before you begin, please keep the following in mind when placing your Access Point(s).
9Select a suitable location to install the Access Point. Assure that the location is away from
any interfering radio signals from devices such as microwave ovens, garage door openers,
vacuum cleaning devices, etc. Please also operate the Access Point in a cool dry place, away
from direct sunlight.
9Position the Access Point appropriately. Signal strength is greatly dependent on your well
placed Access Point. Generally, a centralized area with 360° clear line of sight is the best
location with the antenna in a high position to allow optimal propagation of the signal. The
location of the Access Point greatly influences the signal reception.
Installing the Access Point
Step 1 Turn off all the hardware devices in your network.
Step 2 Connect the Ethernet cable of your router/hub to the LAN port of the Access Point.
Step 3 Plug the power adapter cord into the router’s power jack and then plug the power adapter into a
power outlet.
Step 4 Turn on all the hardware devices in your network. After verifying all the connections, proceed to
Appendix C: PC Configuration
GN-AP01G AirCruiser G Access Point
6
Chapter 3 Configuration - Using A
Web-Browser
This section explains the web-based configuration method of setting up the Access Point. Any Internet
Explorer 5.0 or above or Netscape Communicator 6.0 or above may be used to administer the GN-AP01G
AirCruiser G Access Point.
Using Web-based Configuration
Open the web-browser of your choice, and enter the local IP address of the GN-AP01G AirCruiser G
Access Point into the address line of browser. (The factory default local IP is 192.168.1.1) and press Enter.
The screen shown as below will appear. In lowercase letters, enter the default user name and password,
admin, in the User Name and Password fields. Click the OK button.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Gigabyte Punto di accesso wireless
Gigabyte
Gigabyte GN-A16B Manuale utente
Gigabyte
Gigabyte GN-A16B Manuale utente
Gigabyte
Gigabyte AirCruiser MIMO GN-AP03GM Manuale utente
Gigabyte
Gigabyte GN-BRO1G Manuale utente
Gigabyte
Gigabyte GN-A15AG Manuale utente
Gigabyte
Gigabyte GN-AP101B Manuale utente
Gigabyte
Gigabyte GN-A11G Manuale utente
Gigabyte
Gigabyte GN-A17GU Manuale utente
Gigabyte
Gigabyte AirCruiser G GN-AP05G Manuale utente
Gigabyte
Gigabyte GN-AP02G Manuale utente
