Gilson ASPEC GX-274 Guida di riferimento
Gilson,Inc. | PO Box 620027 | Middleton, WI 53562-0027 | Tel: 608-836-1551 OR 800-445-7661 | Fax: 608-831-4451
GilsonS.A.S. | 19, avenue des Entrepreneurs | BP 145, F-95400 Villiers-le-bel, FRANCE
www.gilson.com | sales@gilson.com | ser[email protected] | [email protected]
Installation Qualication Procedures
GX-274 ASPEC™
LT375011-02 | Page 1 of 5
The Installation Qualication (IQ) procedures are aimed at end users who are implementing GLP-type requirements
and can be readily incorporated into proprietary Standard Operating Procedures (SOPs).
1. Instrument Identication
Manufacturer
Gilson, Inc.
3000 Parmenter Street
PO Box 620027
Middleton, WI 53562-0027 USA
Instrument Name Serial Number*
GX-274 ASPEC™
Z-Arm
GX Rinse Pump (Optional)
*Refer to the shipping label, located on each shipping container, for this information. Check that it matches the serial number on the instrument.
Page 2 of 5 LT375011-02GX-274 ASPEC™ Installation Qualification
Supplier
Organization
Address
Phone Number
Fax
Service Technician
User
Organization
Department
Site (Room)
Date of Installation
Primary Contact
Name
Phone
E-Mail
Page 3 of 5 LT375011-02GX-274 ASPEC™ Installation Qualification
2. Pre-Installation
Instrument Description
The GX-274 ASPEC™ is a single-probe X/Y/Z liquid handler that when paired with a VERITY® 4060 Single Syringe
Pump or VERITY® 4260 Dual Syringe Pump can automate liquid handling procedures and solid phase extraction (SPE)
procedures that use positive pressure elution for cartridge-based applications.
For technical specications for the GX-274 ASPEC, refer to the Chapter 1, Introduction in the GX-274 ASPEC™ User’s
Guide.
Unpacking
When unpacking the instrument, check the contents against the information listed under the Unpacking heading in
Chapter 1, Introduction in the GX-274 ASPEC™ User’s Guide.
Retain all packing material so the GX-274 ASPEC may be shipped safely in the future.
Installation Site Requirements
Technical Specification Definition
Power Requirements 50 to 60 Hz
Voltage: 100 to 240V (Universal Input)
Current
Rating
2A for 100 to 120V
1A for 220 to 240V
Power Consumption: 250W (Maximum)
Temperature Range 5C° to 40°C
Dimensions
(W x D x H)
59.7 x 54.1 x 57.1 cm (23.5 x 21.3 x 22.5 in.)
NOTE
Dimensions do not include the VERITY® 4260 Dual Syringe
Pumps.
NOTE
The height dimension does not include the Z-arm, which
will vary depending on where the Z-arm is clamped.
Page 4 of 5 LT375011-02GX-274 ASPEC™ Installation Qualification
Documents
In addition to this document, the following are provided. For reference purposes, specify the storage location for each.
LT26140CD ASPEC™ Systems Documentation CD
LT375011 GX-274 ASPEC™ IQ Procedures
LT310180 QC Checklist - GX-274 ASPEC™
LT310181 QC Checklist - GX-274 ASPEC™ Z-Drive
LT255565 GX-274 ASPEC™ - China RoHS
LT255568 GX-274 ASPEC™ System Setup Overview
LT312270 GX-274 ASPEC™ Declaration of Conformity
LT315018 Unpacking Instructions
3. Installation
Locator Plate Setup
Refer to the appropriate procedures in Chapter 2, Installation in the GX-274 ASPEC™ User’s Guide.
Z-Arm Setup
Refer to the appropriate procedures in Chapter 2, Installation in the GX-274 ASPEC™ User’s Guide.
Plumbing Connections
Refer to the appropriate procedures in Chapter 2, Installation in the GX-274 ASPEC™ User’s Guide.
Rear Panel Connections
Refer to the appropriate procedures in Chapter 2, Installation in the GX-274 ASPEC™ User’s Guide.
Page 5 of 5 LT375011-02GX-274 ASPEC™ Installation Qualification
Start Up
Refer to the appropriate procedures in Chapter 3, Operation in the GX-274 ASPEC™ User’s Guide.
GX-27X Series Oset Utility
Refer to Chapter 3, Operation in the GX-274 ASPEC™ User’s Guide for information on running the GX-27X Series Oset
Utility (part number 2604710).
4. Firmware Version
To obtain the rmware version for your records:
1. Install the Gilson Ethernet Utility. Refer to its documentation, if necessary.
2. Start the Gilson Ethernet Utility. Click the Start button and then select: All Programs > Gilson Applications > Utilities > Gilson
Ethernet Utility.
3. Select GX 274 ASPEC from the list and then click Connect.
4. Record the rmware version, which is displayed in the “Prom Version” column.
Instrument Name Firmware Version*
GX-274 ASPEC™
5. Acceptance
If no installation problems were detected or installation problems that were detected were resolved, have the local
Gilson representative who installed the GX-274 ASPEC provide the information requested below.
Name
Organization
Signature
Date
End user was provided with a copy of this document.
Indice
Altri manuali Gilson Attrezzature da laboratorio
Gilson
Gilson MyPIPETMAN Select Manuale utente
Gilson
Gilson Centry 117 Manuale utente
Gilson
Gilson PIPETMAX 268 Manuale utente
Gilson
Gilson Pipetman M Manuale utente
Gilson
Gilson pipetman Manuale utente
Gilson
Gilson pipetman Manuale utente
Gilson
Gilson SGA-5R Manuale utente
Gilson
Gilson PIPETMAN M CONNECTED Manuale utente
Gilson
Gilson Trackman Manuale utente
Gilson
Gilson Pipetman M Manuale utente
Gilson
Gilson Pipetman Fixed Manuale utente
Gilson
Gilson ASPEC GX-271 Manuale
Gilson
Gilson Microman M10 Manuale utente
Gilson
Gilson Safe Aspiration Manuale utente
Gilson
Gilson Pipetting Aid Manuale utente
Gilson
Gilson 223 Manuale utente
Gilson
Gilson DISTRIMAN Manuale utente
Gilson
Gilson MC-250 Series Manuale utente
Gilson
Gilson MICROMAN E M25E Manuale utente
Gilson
Gilson GX-27X Series Manuale utente
Manuali Attrezzature da laboratorio popolari di altre marche
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuale utente
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuale utente
NI
NI PXI-5422 Manuale
Collomix
Collomix Aqix Manuale utente
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente
Ocean Insight
Ocean Insight FLAME-NIR+ Manuale utente
