gio Royale Manuale utente
PLEASE INSPECT YOUR GIO ELECTRIC R E-SCOOTER UPON
ARRIVAL AND REPORT ANY DAMAGES THAT MAY HAVE
OCCURRED DURING SHIPPING
⚠
Before operating, please read this manual carefully and familiarize
yourself with GIO Electric scooter components and how they function
1. Please observe all local traffic laws. Remember: ignorance of the law is no excuse.
2. Please check both front and rear brakes before operating and adjust if necessary.
Always allow distance for braking especially in wet, slippery conditions
3. Check often for loose fasteners, especially the wheel nuts, handlebars and saddle
fasteners.
4. Twist the right side handle grip to go, and combine both front and rear brake levers to
stop.
5. For safety when charging please have both the charger and bike in a well-ventilated
area.
6. Avoid disassembling the entire bike or wiring without proper knowledge.
7. Please be responsible and dispose of all old batteries through a local battery recycler.
8. Illustrations/images in this manual may differ from the final product.
9. If you have any concerns or questions in regards to you e-Scooter please contact
GIO Electric Customer Service
1
Table of Contents
Safe Operations Guide 3
Overview 4
Scooter Assembly
Components 4
Mirror installation 5
Front wheel installation 5
Connecting the battery 7
Scooter & Control Diagrams 8
Operating Controls and Security Features
Ignition switch 10
Circuit breaker 10
Throttle 10
Brakes 10
Lights and turn signals 11
Kickstands 11
Alarm and security 11
Maintenance and Care
Cleaning 12
Lubrication 12
Schedule 13
Battery Care 13
Component Specific Information
Charger & Charging your scooter 14
Motor 15
Controller System 15
Brakes 15
Storage 15
Initial and ongoing adjustments
Brakes adjustment 16
Tires Pressure 16
Troubleshooting 17
Wiring Schematic 18
VIN / Serial number Location 18
2
Safe Operations Guide
Do not ride while using headphones/cell phones as they mask traffic sounds and
emergency vehicle sirens, and cause distracted driving which can lead to accidents
Never consume drugs or alcohol before or while operating your GIO electric scooter,
they can impair your judgment and reaction time.
Never stand on a scooter whether moving or not.
Always keep both hands on the handlebars and both feet on the footrest during
operation. Always be alert to your surroundings.
Do not turn at excessive speeds or make sudden or sharp turns.
Never operate your GIO electric scooter without wearing an approved helmet that fits
properly.
Before riding your GIO electric scooter, check throttle control and brakes for proper
operation.
Always inspect your GIO scooter before each use to make sure it is in safe operating
condition. Check for loose screws, nuts, bolts, parts, brakes, drive chain, etc.
Always follow the inspection and maintenance procedures described in this manual.
Always maintain proper tire pressure as described in this manual. Type of tire and
inflation can affect scooter handling
Do not operate near flammable liquids or materials Never attempt to repair when power
is on
⚠
DO NOT MAKE ANY ALTERATIONS OR MODIFICATIONS TO THIS GIO
E-SCOOTER OR ADD ANY PARTS NOT AUTHORIZED BY GIO EXCEPT THOSE
DISCUSSED IN THIS MANUAL OR THOSE REQUIRED BY LAW. DO NOT REMOVE
ANY REFLECTORS, LIGHTS OR OTHER STANDARD EQUIPMENT. FAILURE TO
FOLLOW THESE OPERATION INSTRUCTIONS CAN RESULT IN SERIOUS INJURY
OR DEATH OR COULD RESULT IN AN ELECTRICAL SHORT AND OR FIRE.
⚠
GIO ELECTRIC NOR ANY AUTHORISED GIO DEALERS IS NOT RESPONSIBLE
FOR THE CONSEQUENCES OF FAILURE TO COMPLY WITH STATE AND LOCAL
REGULATIONS RELATING TO THE USE OF THIS ELECTRIC SCOOTER!
3
Overview
Thank you for your purchase of the GIO Electric scooter. It is an easy to operate electric
scooter designed for outdoor use. It is street legal but doesn’t require any licensing or
insurance. (unless required locally) Inspired by motorcycle design, the GIO Electric
scooter is packed with features from backup claxon to generous top speeds, long
driving range, front and rear suspension and more! This manual contains a wide range
of general information and should be read before you operate it.
Assembly
Your GIO Electric Royale scooter arrives 90% assembled and is ready in 5 simple
steps.
Components
Unpack your GIO Electric scooter - Untie or snip the wires holding your GIO Electric
scooter in its protective frame and remove it from its packaging. Double check that your
GIO Electric scooter includes the following components:
1 Front wheel
8
Poncho
2 Front axle and washer
9
Security Lock
3 Hardware for front wheel disc brake
10
Pedal (x2)
4 Hardware for seat
11
Key & Fob (x2)
5 Mirrors
12
Crank (x2)
6 Charger
13
Hardware for Crank
7 Backrest and Hardware
4
Attach the mirrors
Safely stored for shipping, the mirrors attach by twisting into place then tightening with a
wrench.
Front Wheel Assembly
Tools: a No. 10 socket wrench, a No.12 wrench, a No. 14 wrench
Parts: Front wheel, bushings , long bolt, Flat pads, Hexagon bolts
Install the bushing on the front wheel hole with the big head facing outward and the
other side identical.
From the disc side put the bolt through the bushing hole, the front fork hole and the front
wheel hole.
Flat washers are applied to bolts after they pass through the front wheel hole and then
hand tighten the nut.
5
Use a No. 14 wrench on the nut and a No. 12 wrench on the bolt head, tighten the
screws clockwise. (Nut tightening torque 27 N.m-32 N.M, There is a marking on the
nut). The front wheel should spin freely after tightening.
Install the hydraulic disc brake on the front wheel disc. Tighten the Hexagon bolts with a
No. 10 socket wrench. Disc brake screw tightening torque 27n.m-33N.M
6
Connecting the battery
Your battery ships with the battery disconnected. First ensure your scooter ignition is in
the off position. (See pg #10) Open the under seat compartment then lift and remove
the gray plastic under-seat tray. Below the tray sits your scooter’s electronics including
the battery, controller and breaker.
Locate the battery cable which is a brown and red wired cable. For shipping the contact
of this cable will be covered in electrical tape. Remove the tape and attach the lead to
the empty red terminal on the battery. Don’t forget to place the attached cap over the
completed connection.
Your Royale may also ship with the connection between the controller and breaker
disconnected. Look for a single unconnected red wire leading from the control unit,
insert the lead on that wire into the breaker and tighten with the screw on the breaker
above the connection. If the wire was preconnected, ensure the connection is tight. Flip
the breaker to the on position (See pg #10) and the scooter will be ready for its first
charge. (See pg #14)
7
Scooter & Control Diagrams
Scooter Diagram
1 Mirrors
12
Floor board
2 Throttle
13
VIN
3 Brake Lever
14
Seat
4 Headlight & Turn Signal Lights
15
Rear wheel
5 Front mudguard
16
Motor & Rear Brake (internal)
6 Front Fork
17
Rear suspension
7 Brakes
18
Rear mudguard
8 Front wheel
19
Side reflector
9 Chassis guard board
20
Rear Turn Signal Lights
10 Middle stand
21
Back rest
11 Pedal
8
Handlebar Controls Diagram
1 Rear brake lever
8
Bag hook
2 Headlight level switch
9
Front brake lever
3 Turn signal switch
10
Twist grip throttle
4 Horn button
11
headlight switch
5 USB power port
12
Turn signal switch
6 Coin holder
13
Horn button
7 LCD display (see below)
14
Ignition
LCD Display Diagram
1 Motor temperature
6
Glide distance
2 Speedometer
7
Running distance
3 Stopping distance
8
headlight
4 Battery level indicator
9
Left turn signal
5 Right turn signal
9
Indice
Altri manuali gio Scooter
