System 3000
Motion detector top unit 1.10 m Komfort BT, Motion detector top unit 2.20 m
Komfort BT
Automatic operation
The device detects heat motions of people, animals and objects.
– The light is switched on if a person enters the detection field and the brightness threshold
is below the set brightness threshold.
– The run-on time restarts with each detected motion.
– The light is switched off if:
no more movement is detected in the detection field and the run-on time has elapsed or
the ambient light is too bright and the run-on time has elapsed.
To avoid any switch-on caused by a cooling lamp, no movement signals are evaluated for a
brief lockout time after switching off. The motion detector adjusts itself to the ambient conditions
to keep the time as short as possible.
Behaviour after a mains voltage failure
After mains voltage return, the device performs a self-test for a maximum of 20 seconds. After
the self-test has been completed, the device is ready for operation.
If the red status LED flashes three times at repeated intervals, the cover was previously
connected to another insert. To enable the function again, either place the cover onto the
respective insert or press the button (5) for more than 4 seconds to the OFF position for
motion detector cover 1.10m, or the OFF button (4) for more than 4 seconds for motion
detector cover 2.20m.
The following applies during the self-test:
– The red status LED is illuminated.
– The load is switched off.
– Movements are not detected.
– The device can be operated via extensions.
4 Product characteristics
Functions directly on the cover
– Extension of the detection field in combination with 3-wire extension
– Continuous on, Continuous off
– Operation with 2-wire or 3-wire extension, rotary extension or push-button, Bluetooth wall
transmitter or push-button
– Resetting to factory setting
Motion detector cover 1.10m
– Cover panel for limiting the detection field
Functions via app
– Setting the brightness threshold
– Adjusting the sensitivity of the PIR sensors
– Setting the run-on time
– Continuous on, Continuous off
– On or off for 0.5 - 5 hours
– Switch-off warning
– Dynamic run-on time
– Presence simulation
– Alarm function
– Call function enables a person to attract attention if required
– Time switch function enables functions to be switched on or off automatically
– Operating lock
– Reduced basic sensitivity
– Automatic summer/winter time changeover
– Test operation
3 / 16
32599722 10865948 13.07.2022
