Gira 0389 Series Manuale utente

Operating Instructions

Room temperature controller with clock

0389 ..

Table of contents

Normal view in the display ..................................................................... 3

Basic operation of the room temperature controller ........................ 3

The individual displays and buttons ................................................. 3

On these instructions.............................................................................. 4

How the room temperature controller functions .....................................4

Starting up the room temperature controller ...........................................4

Prolonging the heating phase (party function).........................................5

Terminating the party function...........................................................5

Changing over to the lowering temperature (economy button)...............5

Switching for brief periods to the lowering temperature.................. 5

Switching for longer periods to the lowering temperature............... 5

Deactivating the lowering temperature ........................................... 5

Setting the individual temperature.......................................................... 6

Deactivating the individual temperature........................................... 6

Locking buttons .......................................................................................6

Settings in the program menu ................................................................ 7

How to access the menu items in the program menu...................... 7

Setting the date and time – Uhr menu item ......................................7

Modifying temperature steps - tEMP menu item ............................. 8

Modifying the time program – ProG menu item................................8

Setting the holiday program – UrLb menu item ............................. 11

Activating/deactivating the anti-freeze function – FrSt menu item. 12

Cleaning the room temperature controller ........................................... 12

Acceptance of guarantee...................................................................... 13

Normal view in the display

Basic operation of the room temperature controller

The +and -buttons are used to set the values such as the time or the

temperature.

The Sbutton is used to confirm the set values.

If you do not press the Sbutton after carrying out a setting, the display

changes automatically back to the normal display 1 minute after a button

has been pressed.Changes to the respective values are not accepted in

this case.

The P button can be used at any time to return to the normal time

program.

The individual displays and buttons

1 The current weekday is displayed here.

2 Symbol for the "Time program" operating mode.

3 Symbol for the "Comfort temperature" operating mode.

4 Symbol for the "Lowering temperature" operating mode.

5 Symbol for the "Anti-freeze temperature" operating mode.

6 The respective current operating mode is indicated here by means

of triangles.

7 The ranges set for the comfort temperature in the time program are

displayed here.

8 -or button, also called the economy button.

9 Pbutton

10 Sbutton.

11 + or button, also called the party button.

12 The time is displayed here. You can have this display changed by

the installer to, for example, the temperature display.

13 This indicates whether heating (▲) or cooling (▼) is being carried

out.

14 Further information on the settings which you carry out is displayed

here: e.g. an Hif you set the time.

On these instructions

The following symbols and marks are used in these instructions:

1. Action instructions are numbered consecutively.

✓Results of actions are identified by this check mark.

• Enumerations are identified by this point.

How the room temperature controller functions

Your room temperature controller functions similarly to a time delay

switch – at specific times which can be set, your heating system is

regulated by the room temperature controller to three temperatures

which can be set.

• The comfort temperature is usually used for the daytime, put more

precisely for the periods when you are present.

• The lowering temperature is usually used for the night. It is also called

the economy temperature.

• The anti-freeze temperature is usually used for longer periods of

absence (e.g. holidays). The temperature is just high enough to protect

the heating system against freezing.

Starting up the room temperature controller

When the room temperature controller is switched on for the first time as

well as after long deactivation periods, e.g. after a power failure, the room

temperature controller jumps automatically to the time input - the current

data has to be entered here.

(you can edit these data later --> for further information please refer to

”Setting the date and time – Uhr menu item” on Page 7).

✓The hour display flashes

1. Press the +or -button until the desired

hour has been set.

2. Press the Sbutton.

✓The hour is set and the minute display

flashes.

3. You now have to enter all the further data

in the same manner:

•Minutes

• Calendar year

•Month

•Day

4. Confirm each entry with the Sbutton.

✓After the last confirmation with S, the system returns automatically

to the normal display.

iNote!

Information on the economical use of the room temperature controller is

identified by this sign.

iTime format

You can have the time displayed in international 24 hour format

(0H...23H) or in the English-speaking a.m. (12AM...11AM) and p.m.

format (12PM...11PM). When you set the clock, the display begins with

the 24-hour format, followed by the AM/PM format. Depending on the

hour format which you confirm with S, the time is displayed in future

in 24-hour format or in AM/PM format.

Prolonging the heating phase (party function)

If necessary, you can extend or activate the comfort temperature – the so-

called party function. This extension applies only once. After the

extension has expired, the set time program is executed as usual.

1. Press the button.

✓The comfort temperature is extended by

1 hour whenever the button is pressed -

counting is started from the time the

button is pressed.

The period for which the party function is

set flashes at the lower display margin.

✓The display returns to the normal display

when no button is pressed for a few

seconds.

The period for which the party function is

set flashes at the lower display margin.

Terminating the party function

You can terminate the party function as follows:

1. Press the Pbutton in order to terminate the party function.

✓The room temperature controller returns to the normal time program.

Changing over to the lowering temperature (economy button)

You can change over to the lowering temperature for brief or long-term

periods of absence by means of the economy button.

Switching for brief periods to the lowering temperature

1. Press the button for less than 5 seconds.

✓The room temperature controller switches

over to the lowering temperature. The

Lowering temperature mode is displayed.

This changeover is retained until the next

switching time in the time program.

Switching for longer periods to the lowering temperature

1. Press the button for longer than

5seconds.

✓The room temperature controller switches

over continuously to the lowering

temperature.

The Lowering temperature mode is displayed,

the time program is no longer displayed.

This changeover is retained until you return to the normal time program.

2. Press the Pbutton in order to return to the normal time program.

Deactivating the lowering temperature

You can deactivate the lowering temperature at any time:

1. Press the Pbutton in order to deactivate the lowering temperature.

✓The room temperature controller returns to the normal time program.

iNote!

You can extend or activate the heating phase by up to four hours. This

extension can furthermore be repeated as often as wished.

Setting the individual temperature

You can set an individual temperature if the currently set temperature of

the time program does not appear to be suitable.

1. Press the Sbutton.

✓The currently set individual temperature is

displayed flashing.

2. Press the +or -button in order to set the

individual temperature.

3. Press the Sbutton in order to confirm the set individual

temperature.

✓The room temperature controller returns

to the normal display and regulates the set

individual temperature until the next

switching time in the time program. As

long as the individual temperature is used

as the setpoint input, no operating mode

(Comfort, Lowering, Anti-freeze) is displayed, since none of the

temperatures stored there is valid.

Deactivating the individual temperature

You can deactivate the individual temperature at any time:

1. Press the Pbutton in order to deactivate the individual

temperature.

✓The room temperature controller returns to the normal time program.

Locking buttons

To prevent accidental or unauthorised operation of the room temperature

controller, you can activate the button locking function in the normal

view.

Activating button locking function

1. Press the Sand -buttons for longer

than 5 seconds.

✓When the button locking function is active,

"-- --" appears in the display each time a

button is pressed to signal that the desired

operation has been denied.

Deactivating button locking function

1. Press the Sand -buttons for longer than 5 seconds.

✓During unlocking "-- --" appears in the display for 5 seconds. When the

button locking function is deactivated, the normal display appears

again and the buttons can be released.

Settings in the program menu

You can change the following settings in the so-called program menu:

• Date and time (Uhr menu item)

• Temperature steps (tEmP menu item)

•Timeprogram(ProG menu item)

• Holiday function (UrLb menu item)

• Anti-freeze function (FrSt menu item)

How to access the menu items in the program menu

Irrespective of the setting you want to change you always access the

desired menu item in the program menu as follows:

1. In normal display press the Pbutton at least 5 seconds in order to

access the program menu.

2. Press the +or -button in order to access

the desired menu item. The adjacent

example shows the first menu item, the

time.

3. Press the Sbutton in order to select

the desired menu item.

Setting the date and time – Uhr menu item

You can modify the date and time at any time.

1. Go in the program menu to the Uhr menu item (see above).

✓The hour display flashes.

2. Press the +or -button until the desired

hour has been set.

3. Press the Sbutton.

✓The hour is set and the minute display

flashes.

4. Use the same method to carry

out the further settings. These are:

• Minutes – the time is set after confirmation with the Sbutton

• Calendar year

•Month

• Day – only enter the date here. The weekday does not have to be

entered since it is calculated automatically from the entered date.

5. Confirm each entry with the Sbutton.

After the last confirmation with S, the system returns automatically

to the program menu.

6. Press the Pbutton in order to return to the normal view.

iNote!

The clock is designed as a week-based time switch which functions for

at least four hours if the power fails.

The changeover between the summer and winter time is carried out

automatically.

The installed calendar automatically takes the leap years into

consideration.

iTime format

You can have the time displayed in international 24 hour format

(0H...23H) or in the English-speaking a.m. (12AM...11AM) and p.m.

format (12PM...11PM). When you set the clock, the display begins with

the 24-hour format, followed by the AM/PM format. Depending on the

hour format which you confirm with S, the time is displayed in future

in 24-hour format or in AM/PM format.

iDate does not have to be set!

If the date is already set (correctly), you can already exit the setting here

by pressing the Pbutton.

Modifying the temperature steps – tEMP menu item

You can modify the following temperature steps in the tEMP menu item.

• Comfort temperature (default 21.0 °C)

• Lowering temperature (default 18.0 °C)

• Anti-freeze temperature (default 10.0 °C)

1. Go in the program menu to the tEMP

menu item (see Page 7).

✓The temperature setting of the comfort

temperature is displayed flashing. In

addition the operating mode is displayed at

the right-hand display margin.

2. Press the +or -button in order to set the desired temperature.

3. Confirm with the Sbutton.

✓The display changes automatically to the next temperature step, the

lowering temperature.

4. Use the same procedure to set the lowering and the anti-freeze

temperature.

✓After the last confirmation with S, the system returns automatically

to the program menu.

5. Press the Pbutton in order to return to the normal view.

Aborting modifications to the temperature steps:

1. Press the Pbutton in order to abort setting the temperature steps.

✓You return automatically to the program menu. The temperature step

which you have opened last for editing is not saved.

2. Press the Pbutton in order to return to the normal view.

Modifying the time program - ProG menu item

You can change the switching times of your room temperature controller

in the ProG menu item. A maximum of 32 switching times are available.

Each switching time specifies a point within a week at which a change

between the comfort and lowering modes takes place. You can change

the time in steps of 10 minutes.

After commissioning, a time program preset in our works is activated.

These settings can be modified or extended freely.

Viewing the switching times

1. Go in the program menu to the ProG menu item (see Page 7).

✓The first switching time is displayed.

2. Press the +or -button in order to view

the further switching times.

✓The switching times are displayed

chronologically, beginning at Monday

0.00 hours, rising to a maximum of Sunday

23.50.

iChecking the anti-freeze temperature

The anti-freeze temperature can be checked and set in the "Anti-freeze

function" menu item. A change in the anti-freeze temperature in one of

the menu items has a direct effect on the respective other menu item.

Only one anti-freeze temperature is valid in a room temperature

controller.

Weekdays Period

Monday - Friday 6:00 – 22:00 comfort temperature

Saturday, Sunday 6:00 – 23:00 comfort temperature

✓An empty switching time is offered at the

end of the list if at least one switching

time is still available.

Modifying the switching time

1. Go in the program menu to the ProG menu item (see Page 7).

2. If a switching time exists, press the Sbutton.

✓The switching time is opened for editing,

the hour display flashes.

3. Press the +or -button in order to

modify the hour display.

4. Confirm with the Sbutton.

5. Use the same method to carry

out the further settings. These are:

• Minutes

• Day – here the weekdays are initially displayed from Mo-Su, then the

groupings Sa-Su, Mo-Fr, Mo-Sa and Mo-Su.

• Comfort or lowering temperature

6. Confirm respectively with the Sbutton.

✓After the last confirmation with Sthe modified switching time is

saved and the chronologically next switching time is displayed.

Deleting the switching time

1. Go in the program menu to the ProG menu item (see Page 7).

2. Press the +or -button in order to access the desired switching time.

3. Press the +and -buttons for longer than 5 seconds.

✓The switching time is deleted irrevocably and the chronologically next

switching time is displayed.

Deleting all switching times

With this function you can delete all stored switching times. This can, for

example, be practical when a complete changeover of the time program

is to be carried out and the deleting of individual program points is too

time-consuming.

1. Go in the program menu to the ProG

menu item (see Page 7).

2. Select any desired switching time with

the +or -button.

3. Press the +and -buttons for longer than

10 seconds.

✓All switching times are deleted irreversibly and a blank program point

appears with the display "--:--".

iGrouping days

If a grouping of days is selected, a separate program point with the

specified time and the temperature step is created for each selected day

of the group.

Renewed editing of the entire grouping is not possible - only the

individual program items can be edited.

iNote

During this procedure the factory-programmed switching times are also

deleted. These times can be restored via the reset function.

Inserting a new switching time

1. Go in the program menu to the ProG

menu item (see Page 7).

2. Press the +or -button in order to access

the empty switching time.

3. Confirm with the Sbutton.

You can now carry out all the settings for a new switching time:

✓The new switching time is opened for

editing, the hour display flashes.

4. Press the +or -button in order to

modify the hour display.

5. Confirm with the Sbutton.

6. Use the same method to carry

out the further settings. These are:

• Minutes

• Day – here the weekdays are initially displayed from Mo-Su, then the

groupings Sa-Su, Mo-Fr, Mo-Sa, Mo-Su.

• Comfort or lowering temperature

7. Confirm respectively with the Sbutton.

✓After the last confirmation with Sthe modified switching time is

saved and the chronologically next switching time is displayed.

Aborting the settings at the time program

You can abort the modifications at the time program if no switching time

is opened for processing.

1. To do so, press the Pbutton.

✓You return automatically to the program menu. The currently active

switching time which was displayed for setting is not saved.

2. Press the Pbutton in order to return to the normal view.

Further information on programming switching times

• If no further switching time is available, no empty switching time is

offered.

• If a group of days is programmed and insufficient switching times are

free, FULL is output and the number of free switching times is

displayed. You then have to decide whether you want to remove

enough switching times or whether you want to implement the

desired program by using individual days.

• If a group of days covers an existing switching time, the existing

switching time is overwritten without any query.

• If a switching time is placed on the moment of an existing switching

time, the existing switching time is overwritten without any query.

• If an existing switching time is modified and placed on a moment

which is already occupied by an existing switching time, the existing

switching time is overwritten without any query.

• Redundant switching times (switching times in the time program

which do not cause a change in the temperature step) are not

recognized or removed automatically. You have to search for such

switching times and remove them yourself if further free switching

times are required.

iGrouping days

If you select a grouping of days, a separate switching time with the

specified time and the temperature step is created for each selected day

of the group.

Renewed editing of the entire grouping is not possible - only the

individual switching times can be edited.

Indice

Altri manuali Gira Regolatori di temperatura

Gira

Gira 391 Manuale utente

Gira

Gira 2104 Manuale utente

Gira

Gira KNX/EIB Manuale utente

Gira

Gira G1 Manuale utente

Gira

Gira 397 Manuale utente

Gira

Gira System 3000 Manuale utente

Gira

Gira 2370 Manuale utente

Gira

Gira temperature controller Manuale utente

Gira

Gira Room Temperature Controller Manuale utente

Gira

Gira 396 Manuale utente

Manuali Regolatori di temperatura popolari di altre marche

Swegon

Swegon LUNAd MB Manuale utente

Lucky Reptile

Lucky Reptile Thermo Control II Manuale utente

SENSORMETRIX

SENSORMETRIX Argon 100 Manuale utente

Fuji Electric

Fuji Electric PXE4 Manuale utente

Yuyao gongyi

Yuyao gongyi XMT-808 series Manuale utente

Selec

Selec TC544C Manuale utente

P.W. KEY

P.W. KEY rt-208gt Manuale utente

Future Design

Future Design FDC-9200 Manuale utente

BH Thermal

BH Thermal BriskONE Manuale utente

Omron

Omron E5EX-H Manuale utente

West Control Solutions

West Control Solutions KS 45 Guida rapida

MCS

MCS RITC-15B Manuale utente

SMC Networks

SMC Networks Thermo-con INR-244-639 Manuale utente

eltherm

eltherm Ex-TC It Series Manuale utente

Omron

Omron C200H-TV Series Manuale utente

industrie technik

industrie technik CA1 Manuale utente

KRAL

KRAL EET 32 Manuale utente

dixell

dixell XR420C Schema elettrico