Global PCS SS0001 Manuale utente
Global PCS Inc.
SS0001
Bluetooth Access Point
User Guide
Version: 1.1.2
December 12, 2002
Document Number: BTAP-UM-0001
Global PCS Inc.
1, Innovation Road II
Hsinchu Science-Based Industrial Park
Hsinchu 300, Taiwan, R.O.C.
Phone:886-35771155
Fax: 886-35772578
http://www.g-pcs.com.tw/
E-mail : [email protected]
台揚企業集團
Global PCS Inc. SS0001 User Guide
ˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍ
Dec. 10, 2002Global PCS Inc., Proprietary and Confidential Page 2of 18
1.Product Introduction
G-PCS Bluetooth Access Point (SS0001) is a universal adapter for Ethernet, cable modem and
xDSL. SS0001 provides the low cost solution for point-to-point/point to multi points links at a
2.4GHz band, which covers unlicensed band in worldwide comply Bluetooth Specification 1.1.
Devices can access the network through SS0001 using PPP Profile (LAP). The compact design
makes SS0001 easy for desktop or wall mounted installation.
Feature:
nAccess to Internet by xDSL modem and Cable modem.
nAccess to Local Area Network by Ethernet port (RJ45).
nLAN Access: point to point operation to provide Local Area Networking.
nHigh performance antenna.
nDynamic Host Configuration Protocol (DHCP).
nTechnique operating in the unlicensed 2.4Ghz ISM band.
n10/100Mbps Auto-sensing Ethernet.
nEasy to install and user friendly.
nProvides Internal Web server and Telnet setup and configuration.
nNetwork Address Translation ( NAT )
Specification:
Transmitter Output Power: 15dBm ~40mWatt
PowerRequirement: 110V/60Hz
Frequency 2.4GHz Unlicensed band
Data Rate: Up to 721Kbps
Range: Up to 100M free space
Interfaces: RS232 or 10/100 Base T Ethernet Port
Sensitivity: -[email protected]%BER
Dimensions(mm): 203mm x 130mm x 40mm
Weight: 275g
Global PCS Inc. SS0001 User Guide
ˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍ
Dec. 10, 2002Global PCS Inc., Proprietary and Confidential Page 3of 18
2.Install Hardware
lGlobal PCS Bluetooth Access Point x 1
l6V Power Adapter x1
Global PCS Inc. SS0001 User Guide
ˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍ
Dec. 10, 2002Global PCS Inc., Proprietary and Confidential Page 4of 18
3.Network Setup
SS0001 is setup and configured through an internal Web server.
3.1 Internet Explorer Setup
(1) You can connect to web server using any of the three methods, the default Access Point IP
address is 1.1.1.1
I. After connecting to Access Point via dongle, you can use Internet Explorer and
key-in http://1.1.1.1:5000 or the physical Access Point IP address
http://xxx.xxx.xxx.xxx:5000 to connect to web server.
II. Using any PC in Internet and key-in the physical Access Point IP address
http://xxx.xxx.xxx.xxx:5000
III. Using a RJ-45 cross line which connects the Access Point and a PC，then key-in
http://1.1.1.1:5000 or the Access Point IP address http://xxx.xxx.xxx.xxx:5000. Note
that the PC and Access Point must in the same subnet.
(2) After connecting to the web server，you must enter the login ID and password.
(Default ID: BT, Password: access_point)
Figure 3.1 Login in
Global PCS Inc. SS0001 User Guide
ˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍ
Dec. 10, 2002Global PCS Inc., Proprietary and Confidential Page 5of 18
(3) After entering the correct login ID and password, you can configure the Access Point,
including change the login password, network type selection (Fixed IP address, DHCP or
PPPoE), security level selection, enable data encryption or not. Figure 3.2 shows the
description above.
Figure 3.2 Access Point Description
(3.1) Change password configuration:
When you click the “Change password”link, you can change the default password
configuration as shown in figure 3.3. You must enter the old password and the new
password, and figure 3.4 shows the result.
Global PCS Inc. SS0001 User Guide
ˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍ
Dec. 10, 2002Global PCS Inc., Proprietary and Confidential Page 6of 18
Figure 3.3 Change Password
Figure 3.4 Change Password Complete
Global PCS Inc. SS0001 User Guide
ˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍ
Dec. 10, 2002Global PCS Inc., Proprietary and Confidential Page 7of 18
(3.2) Network configuration:
After you click the “Configuration”link, you can configure the network setting. Figure
3.5 shows the configuration. You can select security level from level 1 to level 3, and if
you select level 3, you must enter the PIN code. You also can enable data encryption or
not.
Figure 3.5 Configuration
Note: Bluetooth Security level
Level 1 (Non-secure): a device will not initiate any security procedure.
Level 2 (Service-level enforced security): a device does not initiate security procedures
before channel establishment at L2CAP level.
Level 3 (Link-level enforced security): a device initiates security procedures before the link
set-up at LMP level is completed.
Global PCS Inc. SS0001 User Guide
ˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍ
Dec. 10, 2002Global PCS Inc., Proprietary and Confidential Page 8of 18
(3.2.1) Network configuration (fixed IP address):
If you select fixed IP address, they will show the IP setting screen. You may key in the
network setting information such as the IP address, Subnet mask, Gateway address, and
DNS address in Figure 3.6.
Figure 3.7 shows the configuration you enter in figure 3.6. You can check the
information you input.
Figure 3.6 Network Configuration ( fixed IP address )
Global PCS Inc. SS0001 User Guide
ˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍ
Dec. 10, 2002Global PCS Inc., Proprietary and Confidential Page 9of 18
Figure 3.7 Network Configuration Complete (fixed IP address)
(3.2.2) Network configuration (PPPoE):
If you select PPPoE, you must input the PPPoE login ID and password. Figure 3.8
shows this situation and figure 3.9 shows the result.
Global PCS Inc. SS0001 User Guide
ˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍ
Dec. 10, 2002Global PCS Inc., Proprietary and Confidential Page 10 of 18
Figure 3.8 Network configuration (PPPoE)
Figure 3.9 Network configuration Complete (PPPoE)
Indice
