Globlink GKM-700 Manuale utente
GKM-700 User’s Manual
RF Wireless Slim Keyboard with Optical Trackball
Features and Specifications:
2.4GHz ISM band radio frequency
8 channels with 4096 IDs per channel avoid interference
Operating distance up to 50 feet (15 meters)
Patented optical trackball
Advanced power saving management
Multimedia, Internet and Office hot keys
Mouse left and right keys
Windows 98SE/Me/2000/XP compatible
FCC & CE approvals
Dimension : 340L * 163W * 31.5mmH
Hardware Installation
1. Plug USB receiver to USB female port of the Notebook PC or PC. The “Lock LED”
light turns on.
2. Insert two AAA alkaline batteries to GKM-700; please ensure they are in the right
direction.
Battery insert
LED
Lock key
Setup key
3. Press the “Setup” key on the receiver once, the LED lamp goes off.
4. Press the “Setup” key on the GKM-700 once, the LED of receiver will light on to
indicate that the setup has been completed, and the GKM-700 is working now.
Software Installation
Insert the attached CD driver in your CD-Rom driver. Execute the “setup.exe” to
complete the installation. After installation, please re-start your PC.
A radar icon will be added to the Windows task bar, when the radar icon is green it
indicates that the battery is full, otherwise it becomes red to indicate low battery. The
icon reminds the user to have new batteries prepared for replacement when the
currently used batteries are about to drop out. Immediate replacement of batteries is
not necessary and you can continue using the current batteries until the GKM-700
stops working.
Clicking twice the left button on the radar icon will enter into the mouse control
interface.
How to use
Put GKM-700 in your tabletop, the optical ball is used for moving screen cursor that it
is replacing mouse.
There are 16 keys for hot key which are using in Office, Internet and Multimedia.
Two keys of upper left corner express for mouse of left key and right key.
Power switch for saving power.
While the NumLock is on, they are numeric symbol.
While the NumLock is off (press the NumLock key once), they are change to character
symbol.
Green color indicates
that batter
y
is full.
Optical ball
Power switch
FEDERAL COMMUNICATIONS COMMISSION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiated radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user‘s authority to operate the equipment.
This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
Indice
Altri manuali Globlink Tastiera
