Goclever GCPCFOC2 Manuale utente
QUICK START GUIDE
INSTRUKCJA OBSLUGI
CINEO FOCUS 2
Quick Start Guide
1
English | GB
Polish | PL
Bulgarian | BG
Czech | CZ
German | DE
Greek | GR
Hungarian | HU
Italian | IT
Lithuanian | LT
Portuguese | PT
Slovak | SK
Russian | RU
5
10
16
21
26
31
36
41
46
51
56
61
2
BRAND NAME: CINEO FOCUS 2
MODEL NUMBER: GCPCFOC2
Quick Start Guide
Scheme A
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
16
Quick Start Guide
3
Scheme C
Scheme B
Quick Start Guide
4
Scheme D
Quick Start Guide - GB
BRAND NAME: CINEO FOCUS 2
MODEL NUMBER: GCPCFOC2
5
Buttons (scheme A)
1. Power
2. Arrows
3. OK
4. Menu
5. Source selection
6. Back
Ports/elements (scheme A)
7. Focus control
8. Keystone control
9. SD slot
10. HDMI port
11. AV port
12. 3.5 mm Audio port
13. Additional external drive 5V port
14. USB port
15. VGA port
16. Lens
17. Power input
Installation
Contact a professional installer to mount this project to a
ceiling. For the best adjustment, follow the instructions pic-
tured in Scheme B and C.
Place the projector in axis of symmetry to the screen
(Scheme B). It will ensure the best quality of the image and
optimal shape adjustment.
Choosing a place (scheme C)
Choose adjustment (1), if the projector is to be placed under
the ceiling in front of the screen.
Choose adjustment (2), if the projector is to be placed under
the ceiling behind the screen.
Choose adjustment (3), if the projector is to be placed on a
table/another surface in front of the screen.
Choose adjustment (4), if the projector is to be placed on a
table/surface behind the screen.
Quick Start Guide - GB
6
Turn on the projector
1. Before using the remote control, x two batteries in it.
2. Ensure that the power cable is connected.
3. Press the power key on the remote control or panel
4. After a few seconds , the lamp begins to work.
5. If using for the rst time, the image may appear blurry.
You can control image quality with Focus control knob
(Scheme A 7) and Keystone control knob (Scheme A 8).
If the image is blurry, turn the lens clockwise, then turn it co-
unter clockwise slowly. When the whole image is as clear as
the middle area of it, it will be the best position of the lens.
In the same way you can control shape of the image with
Keystone control knob.
6. You may also re-setup the system parameters anytime
and use different ports after selecting “Menu”.
Turn off the projector
1. When the projector is on, pressing power key on remote
control or on the panel will turn off the projector.
Remote control (Scheme D)
1. Mute
2. Zoom
3. Power
4. No function
5. No function
6. Energy save mode (sound
only)
7. Volume up
8. Rewind
9. Fast forward
10. Volume down
11. Previous
12. Next
13. Play/Pause
14. Up
15. Source selection
16. Left
17. OK
18. RIght
19. Menu
20. Down
21. Exit
22. No function
23. No function
24. No function
Quick Start Guide - GB
7
Troubleshooting
Warnings and safety precautions
1. You should clean the lens whenever you notice any dirt or
smudges. Unplug the power cable before cleaning the lens.
We recommend only using a soft cloth to clean it.
2. In order to get the best results, clean the lter at least
once a month. If the projector is used in a dirty environment,
we recommend to repeat the routine more often. In case of
neglecting maintenance actions, the device can be prone to
permanent damage of image display module and the pro-
ducer does not take any responsibility for that. Cleaning the
lter should only be done with a use of compressed air in a
direction opposite to its slot.
Problem The possible causes
1. The projec-
tor does not
turn on
© power cable did not connect well
© the power switch fuse is broken.
2. The remote
control cannot
turn on the
projector
© the power switch is turned off
© the remote control has no batteries or
the batteries are Iow
© the remote control did not aim at the IR
point
3. No Image © the choice of the input source may not be
correct
© no input signal
© the input cable is not connected
4. Auto-off
after use mul-
tiple times
© the projector ventilation is blocked
© the voltage is not stable
© the projector is overheat
Quick Start Guide - GB
8
3. Never use any abrasive pad, alkaline/acid cleaner or vola-
tile solvent such as alcohol, benzene.
4. Only use standard accessories, otherwise the device can
get damaged.
5. Do not place the device on a wet or damp surface or aro-
und any containers with water. Keep the projector away from
re and heat sources.
6. Place the projector on a stable surface.
7. Before plug in the power, please make sure the voltage of
your area matches this projector (230V - 110V).
8. Only plug into the three pin plug and make sure you use
ground wire.
9. Before use make sure the cable is not damaged.
10. When there is thunder or when not using the projector
for a long period of time , unplug the power cable.
11. Due to high voltage, do not open or try to repair the
projector by yourself. Refer to a professional technician if
repair is needed.
12. You should not place the projector around any heat so-
urces. It can shorten its life expectancy. Optimal working
temperature of the projector is 0 ~ +40°C.
13. The total voltage of the connected devices shall not be
over 500mA,the problems caused by the wrong operation
will not be warranted.
14. Ensure min. 15 cm of free space around the projector
for its proper ventilation. Do not cover the air holes of the
device.
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other Eu-
ropean countries with separate collection systems)
This marking indicates that at the end of its working
life this product should not be disposed of with other
household waste in the EU.
Quick Start Guide - GB
9
To prevent possible harm to the environment or human he-
alth from uncontrolled waste disposal, please separate this
from other types of wastes and recycle it responsible to pro-
mote the sustainable reuse of material resources.
To dispose of your used device, please use the return and
collection systems available in your area or contact the re-
tailer where the product was purchased. They can take this
product for safe environmental recycling.
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Goclever Proiettore
