Godox TT600 Manuale utente

GODOX PHOTO EQUIPMENT CO.LTD

Camera Flash

TT600

Foreword

Before using this product

Please read this user manual carefully in order to ensure your safety and the proper operation of

this product. Keep for future reference.

Thank you for purchasing a GODOX product.

TT600 camera flash adopts Godox wireless X system and 2.4G ratio transmission, which is

compatible with AD360II-C、AD360II-N、TT685C、TT685N、X1T-C、X1T-N, etc. Fit all DSLR camera

brands e.g. Canon, Nikon, Sony, etc.

This TT600 camera flash features:

zGN60 (m ISO 100, @200mm). Adjust from 1/1 to 1/128 in 1/3rd stops

zBuilt-in 2.4G wireless transmission to support transmitting and receiving

zHigh speed sync, wireless remote control, multi flash and manual focus assist

zStable consistency and color temperature with good even lighting

zUser-friendly LCD display & control panel

For Your Safety

zAlways keep this product dry. Do not use in rain or in damp conditions.

zThis product contains high-voltage electronic parts. Touching the high-voltage circuit inside it

may result in electric shock. Do not disassemble. Should repairs become necessary, this

product must be sent to an authorized maintenance center.

zStop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise,

electric shock may occur if you touch the electronic parts inside it.

zDo not fire the flash directly into the eyes (especially those of babies) within short distances.

Otherwise visual impairment may occur. When taking pictures for babies, keep the flash unit at

least 1 meter (3.3 feet) away from them. Using bounce flash to reduce light intensity is also

recommended.

zDo not use the flash unit in the presence of flammable gases, chemicals and other similar

materials. In certain circumstances, these materials may be sensitive to the strong light

emitting from this flash unit and fire or electromagnetic interference may result.

zDo not leave or store the flash unit in places where the ambient temperature reads over 50°C

(e.g. in automobile). Otherwise the electronic parts may be damaged.

Contents

Foreword

For Your Safety

Name of Parts

Body

Control Panel

LCD Panel

What’s in the Box of TT600?

Separately Sold Accessories

Attaching to a Camera

Using the Flash

Power Management

Flash Output

ZOOM: Setting the Flash Coverage

M Mode

Multi Mode: Stroboscopic Flash

S1 Mode

S2 Mode

Hi-Speed Sync Triggering

Custom Function----Focus Assist Beam

Buzz Function

Wireless Flash Shooting: Ratio (2.4G) Transmission

Wireless Control Function

Sync Triggering

Custom Function----Sleep Function

Protection Function

Advanced Application

Technical Data

Maintenance

Name of Parts

zBody

01. Catchlight Panel

02. Built-In Wide Panel (Retracted)

03. Flash Head

04. Optic Control Sensor

05. Focus Assist Beam

06. Wireless Control Port

07. Sync Cord Jack

08. Hotshoe

09. Lock Ring

10. Battery Compartment

zControl Panel

11. < MODE/ > Mode Selection Button/Wireless Mode Selection (Long Keypress)

12. < > Zoom / Function Custom Button (Long Keypress)

13. <GR/CH> Group/ Channel Setting (Long Keypress)

14. Select Dial

15. < > Set Button

16. ON/OFF Power Switch

17. < > Test Button / Flash Ready Indicator

18. < > Focus Assist Beam / High Speed Sync Button (Long Keypress)

zLCD Panel

19. <M> Manual Flash Mode

20. <S1> S1 Slave Flash Triggering

21. <S2> S2 Slave Flash Triggering

22. <Multi> Multi/Stroboscopic Flash Mode

23. < > High Speed Sync Triggering

24. < > Battery Level Indication

25. < > Sound Beep Indication

26. < > Sleep Status

27. < > Overtemperature Indication

28. < > Wireless Signal Transmission

29. < > Focus Assist Beam Indicator

30. Channel

31. Group

zWhat’s in the Box of TT600?

1-flash unit

1-Mini Stand

1-Protection Case

1-Instruction manual

zSeparately Sold Accessories

The product can be used in combination with the following accessories sold separately, so as to

achieve best photography effects:

Cells II high speed trigger, FT-16S power & trigger control, Car charger, Mini softbox, White &

Silver Reflector, Honeycomb, Color gels, Snoot, etc.

Attaching to a Camera

1. Attach the Camera Flash.

Slip the camera flash’s mounting foot into the camera’s hotshoe all the way.

2. Secure the Camera Flash.

Rotate the locking screw on

the mounting foot until it locks up.

3. Detach the Camera Flash.

Rotate the locking screw on the

mounting foot until it is loosened.

Using the Flash

1. Power Management

Use ON/OFF Power Switch (16) to power the flash unit on or off. Turn off if it will not be used for an

extended period of time. This flash unit has Sleep Function and will enter into sleep status when

there is no operation for a long time. For Sleep Function setting, see the following instruction.

2. Flash Output

zFlash output can be varied from 1/128th power to 1/1 full power in 1/3 stop increments. To

obtain a correct flash exposure, use a hand-held flash meter to determine the required flash

output.

zAdjust the power output by rotating Select Dial (14). The following table makes it easier to see

how the stop changes in terms of f/stop when you increase or decrease the flash output:

Figures displayed when reducing flash output level→

1/1

1/1-0.3 1/1-0.7

1/2

1/2-0.3 1/2-0.7

1/4

…

1/2+0.7 1/2+0.3 1/4+0.7 1/4+0.3 …

←Figures displayed when increasing flash output level

3. ZOOM: Setting the Flash Coverage

The flash coverage can be set to match the lens focal length from 24 mm to 200 mm.

Press < > button (12) and rotate Select Dial (14) to change the flash coverage.

4. M Mode: Manual Mode

Press MODE Selection Button (11) to enter M mode. In this mode, you can set the flash unit onto

your camera hot shoe or your trigger hot shoe for firing.

Before shooting, adjust the flash power output. When the camera’s shutter is pressed, the flash

will fire synchronously. Slave triggering mode is not available in M mode.

When “OF” is shown on the LCD display, it means no flash output and flash firing is

turned off.

When setting the flash coverage, make sure it covers the lens focal length

so that the picture will not have a dark periphery.

5. Multi Mode: Stroboscopic Flash

Press Mode Selection Button (11) to enter Multi mode (Stroboscopic flash). With stroboscopic

flash, a rapid series of flashes is fired. It can be used to capture multiple images of a moving

subject in a single photograph.

You can set the firing frequency (number of flashes per sec. expressed as Hz), the number of

flashes, and the flash output.

For setting procedures, see the following:

zPress the Mode Selection Button (11) so that “Multi” is displayed.

zPress Set Button (15) to select the item to be set. The item blinks.

zRotate Select Dial (14) to set a desired number.

Calculating the Shutter Speed

During stroboscopic flash, the shutter remains open until the firing stops. Use the provided

formula to calculate the shutter speed required to capture the full sequence of flashes:

Number of flashes / Firing frequency = Shutter speed

For example, if the number of flashes is 10 and the firing frequency is 5 Hz, the shutter speed

should be at least 2 sec.

Maximum Stroboscopic Flashes：

Note:

zStroboscopic flash is most effective with a highly reflective subject

against a dark background.

zUsing a tripod and a remote switch is recommended.

zA flash output of 1/1 or 1/2 cannot be set for stroboscopic flash.

zStroboscopic flash can be used with “buLb”.

1 2 3 4 5 6-7 8-9

1/4 7 6 5 4 4 3 3

1/8 14 14 12 10 8 6 5

1/16 30 30 30 20 20 20 10

1/32 60 60 60 50 50 40 30

1/64 90 90 90 80 80 70 60

1/128 100 100 100 100 100 90 80

10 11 12-14 15-19 20-50 60-199

1/4 2 2 2 2 2 2

1/8 4 4 4 4 4 4

1/16 8 8 8 8 8 8

1/32 20 20 20 18 16 12

1/64 50 40 40 35 30 20

1/128 70 70 60 50 40 40

6. S1 Mode: S1 Slave Triggering Mode

Long Press <zoom/Fn> button for 2 seconds to enter the custom menu and press Set Button to

choose Sn. Then, turn the Select Dial to choose OFF/S1/S2. In S1 mode, the flash unit can function

as a slave flash for creating multiple lighting effects. It is respectively applicable to manual flash

environment.

In S1 mode, the flash unit will fire synchronously when the master flash fires, the same effect as

that by the use of radio triggers.

7. S2 Mode: S2 Slave Triggering Mode

Long Press <ZOOM/Fn> button for 2 seconds to enter the custom menu and press Set Button to

choose Sn. Then, turn the Select Dial to choose OFF/S1/S2. In S2 mode, the flash unit can function

as a slave flash for creating multiple lighting effects. It is applicable when using a TTL master flash.

In S2 mode, the flash unit will ignore a single “preflash” from the master flash and will only fire

Hz

FlashOutput

Hz

Flash Output

To avoid overheating and deteriorating the flash head during stroboscopic

flash, do not use stroboscopic flash more than 10 times in succession.

in response to the second, actual flash from the master.

8. Hi-Speed Sync Triggering

zTo enter mode, long press < > button and hold for 2 seconds.

zTo exit mode, press Mode Selection Button or long press < > button and hold for

2 seconds again.

zIn hi-speed sync triggering mode, you can use a hi-speed sync trigger to have your flash

unit synchronized with all shutter speeds of cameras (max. 1/8000 second, up to your camera).

This is convenient when you want to use aperture priority for fill-flash portraits.

9. Custom Function-----Focus Assist Lamp

zUnder poorly-lit or low-contrast conditions, you can press < > button (18) to turn on the

focus assist beam in order to make it easier to autofocus.

Note:

*Hi-speed sync triggering mode is effective only when the flash unit is used together with the

following flash triggers.

1. Hi-speed sync trigger, e.g., Godox Cells II transceiver.

2. TTL wireless flash trigger X1C

3. TTL wireless flash trigger X1N

*Hi-speed sync triggering mode is not available when TT600 is mounted onto the camera

To avoid overheating or deteriorating the flash head during high speed sync flash,

the over-temperature protection function will be activated automatically after 10

continuous high-speed flashes and the recycle time becomes 10 seconds longer.

Altri manuali per TT600

Indice

Altri manuali Godox Flash della fotocamera

Godox

Godox V860IIF Manuale utente

Godox

Godox Quicker D II Manuale utente

Godox

Godox ThinkLite TT680-N Manuale utente

Godox

Godox TT350C Manuale utente

Godox

Godox Gemini GS series Manuale utente

Godox

Godox DP II Manuale utente

Godox

Godox Ving V860n Manuale utente

Godox

Godox TT685 Manuale utente

Godox

Godox V1C Manuale utente

Godox

Godox ThinkLite TT660 II Manuale utente

Godox

Godox TT6855F Manuale utente

Godox

Godox V860IIS Manuale utente

Godox

Godox TT600S Manuale utente

Godox

Godox witstro ad360II-c Manuale utente

Godox

Godox LF308 Series Manuale utente

Godox

Godox thinkLite TT680-C Manuale utente

Godox

Godox TT350N Manuale utente

Godox

Godox V1F Manuale utente

Godox

Godox D200 Manuale utente

Godox

Godox V1F Manuale utente

Godox

Godox witstro ad360II-c Manuale utente

Godox

Godox V860IIIF Manuale utente

Godox

Godox V1 C Manuale utente

Godox

Godox V860IIIF Manuale utente

Manuali Flash della fotocamera popolari di altre marche

Canon

Canon 5246B002 Manuale utente

Sigma

Sigma EF-610 DG SUPER - Manuale utente

Sony

Sony HVL-FDH4 Manuale utente

Sony

Sony HVL-RLA Manuale utente

Nikon

Nikon SB-28 Manuale utente

Canon

Canon Speedlite 380EX Manuale utente

Olympus

Olympus FL 36R Manuale utente

Nikon

Nikon BC-7 Manuale utente

Altura Photo

Altura Photo AP-305N Manuale utente

Nikon

Nikon SB-800 Manuale utente

DÖRR

DÖRR DFX-300 Manuale utente

Canon

Canon SPEEDLITE 300EZ Manuale utente

Sunpak

Sunpak 622 Super Pro-System Manuale utente

Polaroid

Polaroid PL108-AF Manuale utente

Pentax

Pentax AF240Z Manuale utente

Pixapro

Pixapro Li-ion 350 II N Manuale utente

Canon

Canon 430EX - Speedlite II - Hot-shoe clip-on... Manuale utente

Opus

Opus OPL-M40 Manuale utente