Gofanco HDbaseT-HDR Manuale utente

HDbaseT HDMI 2.0 Extender

with HDR

User's Guide

G4-0045A

P/N: HDbaseT-HDR

Thank you for purchasing from gofanco. Our

products aim to meet all your connectivity needs

wherever you go. For optimum performance

and safety, please read the instructions carefully

and keep this User’s Guide for future reference.

If you need more information about our

products, please visit www.gofanco.com. For

technical support, please email us at

[email protected]. For drivers/manuals

download, please go to www.gofanco.com/

download.

Important Safety Notices

Please read safety instructions carefully before

installation and operation.

• Please pay close attention to all warnings

and hints for this device

• Do not expose this unit to rain, heavy

moisture, or liquid

• Do not repair the device or open the

enclosure without professional guidance

to avoid electric shocks. Doing so may void

your warranty

• Keep the product in a well-ventilated

locationtoavoiddamagefromoverheating

• Shut off power and make sure environment

is safe before installation

• Do not plug the HDMI cables and IR

Extension cables in/out when the device is

in use to avoid cable damage. Make sure

they are plugged into the correct ports

• Use the included DC12V power adapter

only. Make sure the specification matches

if using 3rd-party DC power adapter

PackageContents

• Transmitter (TX) & Receiver (RX)

• IR Blaster & IR Receiver Extension Cables

• Power Adapter (1x)

• 3-Pin Phoenix Connector and Plastic

Cushions (8x)

• RS-232 Cables (2x)

• Mounting Ears and Screws (4x)

• User's Guide

Introduction

The HDbaseT HDMI 2.0 Extender with HDR

extends HDMI signals up to 70 meters (230ft)

with PoC using an economical CAT5e/6 cable.

Features

• Extends HDMI transmissions up to 70m

(230ft) @ 1080p and 40m (130ft) @ 4K

• Supports UHD 4K/60Hz/4:4:4. HDMI 2.0

& HDCP 2.2 compliant and backward

compatible with previous versions

• Supports HDR with 18Gbps bandwidth

• Supports CEC, Bi-directional IR, and

RS-232 pass-through

• Bi-directional PoC (Power over Cable)

support. Only 1 power adapter required to

power both the transmitter and receiver

• Featuresfirmwareupdateoptionsfor future

compatibility expansion

Product Layout

Figure 1: Transmitter and Receiver

No. Name Description

1 Mode Switcher

- CTRL: RS-232 pass-through

- UPDATE A: Firmware update mode

- UPDATE B: Update compression IC

2 Power LED Red when power adapter is connected

3HDMI IN (Transmitter) Connects to your HDMI source

HDMI OUT (Receiver) Connects to your HDMI display

3-Pin Terminal Block

(Transmitter)

RS-232 pass-through. Connects to your

computer's RS-232 port using the included

RS-232 cable

3-Pin Terminal Block

(Receiver)

RS-232 pass-through. Connects to your

end device's RS-232 port using the

included RS-232 cable

5IRIN Plug the IR Receiver Extension cable here,

receives signals from an IR remote control

6IROUT

Plug the IR Blaster Extension cable here,

transmitts the signals from an IR remote

control

HDBT OUT (Transmitter) Connects to the HDBT IN of the Receiver

using a CAT5e/6 cable

HDBT IN (Receiver) Connects to the HDBT OUT of the

Transmitter using a CAT5e/6 cable

8 DC 12V Power Jack Plug the included power adapter into

either power jack, to power both units

IR Extenders

•IR Blaster cable: Plug into the Transmitter's

or Receiver's IR OUT to emit IR signals

•IR Receiver cable: Plug into the Receiver's

or Transmitter's IR IN to receive IR signals

Control your media player (such as DVD) at the

TV side using the media player's remote

controller

• Plug the IR Receiver cable to the Receiver's

IR IN port

• Plugthe IR Blaster cabletotheTransmitter's

IR OUT port

Control your TV at the media player side using

the TV's remote controller

• Plug the IR Receiver cable to the

Transmitter's IR IN port

• Plug the IR Blaster cable to the Receiver's

IR OUT port

Note: Incorrect placement of the IR cables may

result in cable failures. Please check carefully

beforepluggingintheIRcables. TheIRReceiver

cable always plugs into an IR IN port & IR

Blaster cablealways plugs into an IR OUT port.

Installation Requirements

1. HDMI source device (computer, DVD

player, XBOX, PS3, etc).

2. HDMI display device (SDTV/Monitor,

HDTV/Monitor, projector, etc.).

3. UTP/STP CAT5e/6 cable following

IEEE-568B wiring standard.

Hardware Installation

1. Power off all devices including your HDMI

source and HDMI display.

Transmitter

2. Connect your HDMI source device to the

Transmitter's HDMI IN connector with a

HDMI cable (HDMI cable not included).

3. Optional: Connect your RS-232 source

device with the included cable.

Receiver

4. Connect your HDMI display to the

Receiver's HDMI OUT connector with a

HDMI cable (HDMI cable not included).

5. Optional: Connect your RS-232 end device

with the included cable.

6. Plug your CAT5e/6 cable between the

Transmitter's HDBT Out and Receiver's

HDBT IN.

7. Optional: Connect the IR Extension cables

according to the instructions on page 6.

8. Plug the included power adapter into either

the Transmitter's or Receiver's power jack,

then plug the power adapter into a reliable

power source. Note: Only one power

adapter is needed to power both

Transmitter and Receiver.

9. Power on all connected devices.

10. The HDMI extender is ready for use.

Application

Figure 2:

FAQ & Solutions

Q: There is no video output or audio and

video display is not normal:

A: 1) Use a shorter network cable.

Q: The extender is not working properly:

A: 1) Please check the cable lengths below:

-HDMI cables:Upto 5m(Input and Output)

- Network cables (CAT5e/6):

- Up to 70m @ 1080p

- Up to 40m @ 4K

Indice

Altri manuali gofanco Estensione

gofanco

gofanco HDbitT4K Manuale utente

gofanco

gofanco HDMIExt4P Manuale utente

gofanco

gofanco HDbitT4Pv2 Manuale utente

gofanco

gofanco HDwireless100-LT Manuale utente

gofanco

gofanco 4K120 Manuale utente

gofanco

gofanco HDbitTv2 Manuale utente

gofanco

gofanco HDwireless100 Manuale utente

gofanco

gofanco HDbitT8P Manuale utente

gofanco

gofanco KVMHD20Ext Manuale utente

gofanco

gofanco HDwireless1x4 Manuale utente

gofanco

gofanco USBCwireless Manuale utente

gofanco

gofanco KVMHDExt4K Manuale utente

gofanco

gofanco HDExtCoax Manuale utente

gofanco

gofanco HDExt24-HD20 Manuale utente

gofanco

gofanco HD20wireless Manuale utente

gofanco

gofanco Prophecy PRO-HDExtIP-TX Manuale utente

gofanco

gofanco AudioCATExt Manuale utente

gofanco

gofanco HDMIExt8P Manuale utente

gofanco

gofanco HDExtIP4K Manuale utente

gofanco

gofanco HDwirelessMini Manuale utente

gofanco

gofanco HDwireless150 Manuale utente

gofanco

gofanco USBCVXP2VID Manuale utente

gofanco

gofanco HD14Ext1xN Manuale utente

gofanco

gofanco HDwireless100 Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente

gofanco HDbaseT-HDR Manuale utente

Manuali Estensione popolari di altre marche