Gofanco HDbitT4P Manuale utente

4-Port HDMI HDbitT

Extender 1080p - 120m

User's Guide

G4-0073A

P/N:HDbitT4P

Thank you for purchasing from gofanco. Our products

aim to meet all your connectivity needs wherever you

go. For optimum performance and safety, please read

the instructions carefully and keep this User's Guide for

future reference. If you need more information about

our products, please visit www.gofanco.com. For

technical support, email us at [email protected].

For drivers/manuals download, please go to http://

www.gofanco.com/download.

Important Safety Notices

Pleasereadsafetyinstructionscarefullybeforeinstallation

and operation.

• Please pay close attention to all warnings and hints

for this device

• Do not expose this unit to rain, heavy moisture, or

liquid

• Do not put any items into the device or attempt to

modify its operation

• Do not repair the device or open the enclosure

without professional guidance to avoid electric

shocks. Doing so may void your warranty

• Keep the product in a well-ventilated location to

avoid damage from overheating

• Shut off power and make sure environment is safe

before installation

• Do not plug the HDMI cables and IR cables

in/out when the device is in use to avoid cable

damage. Make sure they are plugged into the

correct ports

• Use the included power adapters only. Make sure

the specification matches if using 3rd-party DC

power adapters

Introduction

The4-Port HDMI HDbitTExtender 1080p - 120mextends

high definition 1080p signals up to 394ft (120m) over

CAT6 to 4 monitors.

PackageContents

Transmitter (1pc)

Power Adapter

5V/2A (1pc)

Power Adapter

5V/1A (4pcs)

IR Blaster Cable (1pc)

Manual (1pc)

Receiver (4pcs)

IR Receiver Cable (4pcs)

Product Layout

Figure 1: Transmitter (TX) - Back Panel

Figure 2: Transmitter (TX) - Front Panel

1 Reset: Press to reset the Transmitter

2 HDMI In: Connects to the HDMI source device

3 IR Out: Infrared 3.5mm socket. Plug the IR Blaster

Cable here. See instructions on page 7.

4 RJ45 Out (x4): Connects to the Receiver's RJ45 In

using a Cat6 cable

5 Power Jack: Connect the included 5V/2A power

adapter here

6 LinkLED(x4):LightsupwhenRJ45signalisdetected

7 Data LED: Blinks when data transfer is detected

Figure 3: Receiver (RX) - Input

1 Reset: Press to reset if the HDMI Extender doesn't

work properly

2 RJ45 In: Link to the Transmitter's RJ45 Out via Cat6

cable

3 Link LED: Blinks when powered on. On when the

Cat6 cable is connected/linked properly between

the Transmitter and Receiver

Figure 4: Receiver (RX) - HDMI Output

4 Power Jack: Connect the included 5V/1A power

adapter here

5 HDMI Out: Connect your HDMI display here with

an HDMI cable (cable not included)

6 IR In: Infrared 3.5mm socket. Plug IR Receiver

Cable here. See instructions on page 7.

Installation Requirements

1. HDMI source device (DVD player, set top box, PC,

etc.)

2. HDMI display device (SDTV/Monitor, HDTV/

Monitor, projector, etc.)

3. HDMI cables (not included)

4. UTP/STP CAT6/6A/7 cable, following IEEE-568B

wiring standard

Cat Cable Writing

We suggest both RJ45 connectors be wired identically

using T568B wiring standard for the best performance

and compatibility.

Hardware Installation

To achieve optimal performance, Cat6 cable is

recommended.

1. Power off all devices including your HDMI source

and HDMI display.

2. Connect your HDMI source to the Transmitter's

HDMI In connector.

3. Optional: Connect the IR Blaster Cable to the

Transmitter's IR Out port. Face the eye towards

your HDMI source device's IR window. This

connection is needed only if you need to control

your HDMI source at the remote location.

4. Plug your Cat6 cable between the Transmitter's

RJ45 Out and Receiver's RJ45 In.

5. Connect your HDMI display to the Receiver's

HDMI Out connector with an HDMI cable (HDMI

cable not included).

6. Optional: Connect the IR Receiver Cable to the

Receiver's IR In port. This connection is needed

only if you need to control your HDMI source at

the remote location.

7. Plug the included 5V/2A power adapter into the

Transmitter's Power Jack.

8. Plug the included 5V/1A power adapter into the

Receiver's Power Jack, then plug all power

adapters into reliable power outlets.

9. Power on your HDMI source device and HDMI

displays. The extender is ready for use.

ConnectionDiagram

HDMI Source

IR Blaster

IR Receiver

Power Adapter

Transmitter

Cat6 cable (x4)

Display (x4)

Receiver (x4)

HDMI cable (x4)

FAQ & Solutions

Q1: No image or audio output on the display?

A: 1. Check if the display is in standby mode.

2. Make sure the display's HDMI port is properly

connected to the HDMI cable.

3. Check the Link LED indicator on the Receiver is

on.

Q2: Not all displays are receiving a signal.

A: 1. Check the Cat6 cables for secure and solid

connection.

2. Press the Reset button on the Transmitter and

Receiver to reset the system.

3. Re-connect the Cat6 cable(s) corresponding to the

display(s) that are not working properly.

Q3: TVdisplays "Waiting forConnection" on thebottom

right corner.

A: 1. Check the Cat6 cables for secure and solid

connection.

2. Check the power supply on both transmitter and

receiver(s) is connected and powered on.

Q4: TV displays "Please check the TX input signal".

A: 1.PleasechecktheHDMIcableisconnectedproperly

and the HDMI source device is powered on.

2. Press the reset button on the Transmitter.

3. Connect the TV directly to the HDMI source

device to verify there is signal output.

Specifications

Item Specification

HDMI signal HDMI 1.3, HDCP 1.4

Input TX: 1x, 19-pin HDMI, Female

RX: 1x, RJ45; 1x, IR, 3.5mm socket

Output TX: 4x, RJ45; 1x, IR, 3.5mm socket

RX: 1x, 19-pin HDMI, Female

Resolution

480i@60Hz, 480p@60Hz, 576i@50Hz,

576p@50Hz, 720p@50/60Hz,

1080i@50/60Hz, 1080p@50/60Hz

Transmission distance Up to 394 ft (120m)

IR signal 20KHz - 60KHz

Operating temperature 32 F - 140 F (0 - 60 C)

Power adapter TX: 5VDC/2A

RX: 5VDC/1A

Indice

Altri manuali gofanco Estensione

gofanco

gofanco HDEXT120ESD Manuale utente

gofanco

gofanco HD20Ext1xN Manuale utente

gofanco

gofanco prophecy PRO-HDRextract Manuale utente

gofanco

gofanco HDMIExtSplit Manuale utente

gofanco

gofanco HD14Ext-2P Manuale utente

gofanco

gofanco HDbitTv2 Manuale utente

gofanco

gofanco Prophecy PRO-HDExtIP-TX Manuale utente

gofanco

gofanco HD14Ext-EDID Manuale utente

gofanco

gofanco HDMIExt Manuale utente

gofanco

gofanco KVMHD20Ext Manuale utente

gofanco

gofanco AudioCATExt500 Manuale utente

gofanco

gofanco HDWirelessKVM Manuale utente

gofanco

gofanco HDMIExt8P Manuale utente

gofanco

gofanco HD20Ext Manuale utente

gofanco

gofanco PRO-HDBaseT-U Manuale utente

gofanco

gofanco HDBITT4K22 Manuale utente

gofanco

gofanco HD20Ext4P-LT Manuale utente

gofanco

gofanco HD14Ext Manuale utente

gofanco

gofanco HDwireless100 Manuale utente

gofanco

gofanco KVMHDExt4K Manuale utente

gofanco

gofanco HDExt24-HD20 Manuale utente

gofanco

gofanco HDbitTPro Manuale utente

gofanco

gofanco AudioCATExt Manuale utente

gofanco

gofanco HDExtCoax Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente

gofanco HDbitT4P Manuale utente

Manuali Estensione popolari di altre marche