Gofanco KVMHDExt Manuale utente

HDMI USB KVM CAT5e/6

Extender - 60m

User's Guide

G4-0070A

P/N: KVMHDExt

Thank you for purchasing from gofanco. Our

products aim to meet all your connectivity needs

wherever you go. For optimum performance

and safety, please read the instructions carefully

and keep this User’s Guide for future reference.

If you need more information about our

products, please visit www.gofanco.com. For

technical support, please email us at

[email protected]. For drivers/manuals

download, please go to www.gofanco.com/

download.

Important Safety Notices

Please read safety instructions carefully before

installation and operation.

• Please pay close attention to all warnings

and hints for this device

• Do not expose this unit to rain, heavy

moisture, or liquid

• Do not repair the device or open the

enclosure without professional guidance

to avoid electric shocks. Doing so may void

your warranty

• Keep the product in a well-ventilated

location to avoid damage from overheating

• Shut off power and make sure environment

is safe before installation

• Do not plug the HDMI cables in/out when

the device is in use to avoid cable damage.

Make sure they are plugged into the correct

ports

• UsetheincludedDC5Vpoweradapteronly.

Makesurethe specification matches if using

3rd-party DC power adapters

Introduction

The HDMI USB KVM CAT5e/6 Extender - 60m

extends HDMI and USB signals up to 60 meters

(197ft) over a single CAT6 cable (50 meters with

CAT5e).

Features

• Supports Full HD 1080p with nearly zero

latency

• KVM extension with 2 USB ports to control

the source device, such as a PC, at a remote

location

• Transmitter(TX)is equipped with an HDMI

output for a local HDMI display

• Power over Cable (PoC) allows one power

adapter to power both the TX & RX units

PackageContents

• Transmitter (TX) unit (1pc)

• Receiver (RX) unit (1pc)

• Power adapter (1pc)

• USB Type-A to Type-A cable (1pc)

• User's guide (1pc)

Product Layout

Figure 1: Transmitter (TX)

1 Reset Button Press to reset the Transmitter (TX) unit

2USBIndicator

Off: No PC connection

Slow flashing: No USB device(s) detected on the RX unit

On/Fast flashing: USB device(s) detected on the RX unit

3 USB Port Connects to the computer's USB port

4 RJ45 Out Connects to the Receiver's RJ45 port using a CAT cable

5 Link LED On: HDMI source signal detected

Flashing: No HDMI source signal detected

6 Power Jack Connects to the included power adapter

7 HDMI IN Connects to an HDMI source

8HDMIOut ConnectstoanHDMIdisplay

Figure 2: Receiver (RX)

1 Reset Button Press to reset the Receiver (RX) unit

2USBIndicator

Off: No power detected or RJ45 not linked properly to

Transmitter (TX)

On/Fast flashing: USB device(s) detected

Slow flashing: No PC connection or no USB device(s) detected

3 USB Port Connects to keyboard or mouse

4 RJ45 In Connects to the Transmitter's RJ45 port using a CAT cable

5 Link LED On: HDMI source signal detected

Flashing: No HDMI source signal detected

6 Power Jack Connects to the included power adapter (optional)

7 HDMI Out Connects to an HDMI display

8 USB Port Connects to keyboard or mouse

Hardware Installation

1. Power off all devices including your HDMI

source and HDMI display(s).

2. Connect your HDMI source device to the

Transmitter's HDMI In connector with an

HDMI cable (HDMI cable not included).

3. Connect the Transmitter's USB port to the

PC's USB port using the included USB

Type-A to Type-A cable.

4. Optional: Connect an HDMI display to the

Transmitter's HDMI out connector with an

HDMI cable (HDMI cable not included) for

local monitoring of the HDMI signal.

5. Plug your CAT5e/6 cable between the

Transmitter's RJ45 Output and Receiver's

RJ45 Input.

6. Connect your HDMI display to the

Receiver's HDMI out connector with an

HDMI cable (HDMI cable not included).

7. Plug your keyboard and mouse into the

USB ports of the Receiver (RX) unit.

8. Plug the included power adapter into the

Transmitter's power jack, then plug the

power adapter into a reliable power source.

Note: The Receiver (RX) does not need a

power adapter, it can be powered from the

Transmitter (TX) over CAT cable with PoC

technology.

9. Power on all connected devices.

10. The extender is ready for use.

Application Diagram

CAT Cable Wiring

We suggest both RJ-45 connectors be wired

identically following T568B wiring standard for

the best performance and compatibility

FAQ & Solutions

Q: There is no video output or video is not

normal:

A: 1) Check all cable connections.

2) Press reset button on the Transmitter and

Receiver units.

Q: The Link LED is flashing:

A: 1) Make sure the network cable follows the

IEEE-T568B wiring standard.

2)Check whether TXhasHDMIsignal input.

3) Press the reset button on both TX & RX.

Q: The extender is not working properly:

A: 1) Please check the cable lengths below:

- HDMI cables: Up to 3 meters

- Network cables CAT6: Up to 60m; CAT5e:

Up to 50 meters

2) Press the reset button on the TX/RX and

reconnect.

Q: RX Link LED is on but there is no image:

A: 1) Press RX reset button to reset the unit.

2) Make sure the HDMI cable is firmly

connected to the display.

3) Use a higher quality network cable.

Specifications

HDMI Compliance HDMI 1.3

HDCP Compliance HDCP 1.4

Resolution

720x576p@50Hz, 720x480p@60Hz,

1280x720p@60Hz, 1920x1080p@60Hz,

640x480p@60Hz, 800x600p@60Hz,

1024x768p@60Hz, 1280x800p@60Hz,

1280x1024p@60Hz, 1440x900p@60Hz,

1680x1050p@60Hz

Bandwidth 10.2 Gb/s

Input and Output TMDS

Signal 0.5 - 1.5Vp-p (TMDS)

Input and Output DDC

signal 5Vp-p (TTL)

Transmission Distance CAT5e: 50 meters

CAT6: 60 meters

Power Supply 5VDC / 2A

Power Consumption TX: 2W

RX: <2W

Operating Temperature 0 - 60 C

Storage Temperature -10 - 70 C

Humidity 0 - 90%

Indice

Altri manuali gofanco Estensione

gofanco

gofanco HDbitT8P Manuale utente

gofanco

gofanco HDMIExt8P Manuale utente

gofanco

gofanco HD20Ext4P-LT Manuale utente

gofanco

gofanco HD14Ext-EDID Manuale utente

gofanco

gofanco HD14Ext Manuale utente

gofanco

gofanco AudioCATExt500 Manuale utente

gofanco

gofanco HD20wireless Manuale utente

gofanco

gofanco HDMIExt2 Manuale utente

gofanco

gofanco HDWirelessKVM Manuale utente

gofanco

gofanco HDwirelessMini Manuale utente

gofanco

gofanco HDExt50 Manuale utente

gofanco

gofanco HDbitT4K Manuale utente

gofanco

gofanco HDbitT4Pv2 Manuale utente

gofanco

gofanco AudioCATExt Manuale utente

gofanco

gofanco HDbaseT-HDR Manuale utente

gofanco

gofanco HDMIExtSplit Manuale utente

gofanco

gofanco USBCVXP2VID Manuale utente

gofanco

gofanco HD20Ext-LT Manuale utente

gofanco

gofanco HD14Ext-2P Manuale utente

gofanco

gofanco HDwireless200 Manuale utente

gofanco

gofanco HDExtIP4K Manuale utente

gofanco

gofanco HD20Ext Manuale utente

gofanco

gofanco HDwireless100-LT Manuale utente

gofanco

gofanco HDBaseT4P-4K Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente

gofanco KVMHDExt Manuale utente

Manuali Estensione popolari di altre marche