gofanco KVMScaler2P Manuale utente
2-in-1 HDMI KVM Scaler &
Switch Console
User's Guide
G4-0080A
P/N: KVMScaler2P
2
Thank you for purchasing from gofanco. Our
products aim to meet all your connectivity needs
wherever you go. For optimum performance
and safety, please read the instructions carefully
and keep this User’s Guide for future reference.
If you need more information about our
products, please visit www.gofanco.com. For
technical support, please email us at
download, please go to www.gofanco.com/
download.
3
Important Safety Notices
Please read safety instructions carefully before
installation and operation.
• Please pay close attention to all warnings
and hints for this device
• Do not expose this unit to heavy moisture
or liquids
• Do not repair the device or open the
enclosure without professional guidance
to avoid electric shocks. Doing so may void
your warranty
• Keep the product in a well-ventilated
location to avoid damage from overheating
• Shut off power and make sure environment
is safe before installation
• Do not plug the HDMI cables and USB
cables in/out when the device is in use to
avoid cable damage. Make sure the cables
are plugged into the correct ports
• UsetheincludedDC5Vpoweradapteronly.
Makesurethe specification matches if using
3rd-party DC power adapters
4
Introduction
The 2-in-1 HDMI KVM Scaler & Switch Console
allows you to control 2 computers using one
keyboard and mouse.
Features
• 4 display modes - Single screen, Picture-in-
Picture (PiP) split screen, Vertical split
screen, Horizontal split screen - controlled
by OSD menu or push button
• LED indicator displays the active HDMI
signal for easy identification
• Windows, Mac OS, and Linux compatible
PackageContents
• 2-in-1 HDMI KVM Scaler & Switch Console
• USB Type-A to USB Type-B cable (2pcs)
• Power adapter
• User's Guide
Installation Requirements
• Desktop,laptop,notebookwith an available
HDMI and USB Type-A port
• HDMI display and HDMI cables
• Windows, Mac OS, and Linux
5
Product Layout
1. Audio Button Switches the audio signal between PC1 and
PC2
2. Mode Button
Switches within the 4 video modes: Full
screen, Picture-in-Picture (PiP) split screen,
left and right split screen, top and bottom
split screen
3. Video Button Switches the active screen between PC1
and PC2
4. HDMI Signal LED Blue light: PC1 HDMI signal detected
Red light: PC2 HDMI signal detected
5. Mouse Connects to a USB mouse
6. Keyboard Connects to a USB keyboard
7. PC2 USB Connects to a USB port of PC2
8. PC2 HDMI In Connects to HDMI output of PC2
9. PC1 USB Connects to a USB port of PC1
10. PC1 HDMI In Connects to HDMI output of PC1
11. HDMI Out Connects to your HDMI display
12. Power Jack Connects to the included power adapter
6
Hardware Installation
1. Power off all devices including your
computers and HDMI display.
2. ConnecttheKVM'sPC1'sHDMIInandUSB
to computer 1, and connect PC2's HDMI In
and USB to computer 2 (HDMI cables not
included).
3. Connect the keyboard and mouse to the
KVM.
4. Connect your HDMI display to the KVM's
HDMI Out with an HDMI cable (HDMI
cable not included).
5. Plug the included power adapter into the
KVM's power jack, then plug the power
adapter into a reliable power source.
6. Power on all connected devices.
7. The KVM is ready for use.
7
Input Audio Source
Right click the volume control icon in the
Windows taskbar and select audio device.
1. Select KVM sound option below.
2. Click OK to save the changes.
Reset the Resolution
Ifyouhaveanyproblemswiththedisplayoutput,
press and hold down both Mode and Video
buttons simultaneously for 10 seconds to reset
the resolution to 1080p@60Hz.
8
Mouse Control
There are 2 mouse modes, PC mouse and Virtual
mouse. The PC mouse cursor is white in color,
while the Virtual mouse cursor is large and
yellow in color.
Virtual Mouse
Virtual Mouse allows you to control the KVM
functions such as full and split screen mode,
audio settings, resolution, and advanced settings
usingyour mouse through the OnScreen Display
(OSD) menu. Click on the left and right mouse
buttons simultaneously to enter Virtual mouse
mode. Exit Virtual mouse mode by clicking on
the left and right mouse buttons simultaneously
again. Note: In some OSes the right click menu
will pop-up when entering Virtual mouse mode,
this is normal.
9
On Screen Display Menu (OSD)
Make sure you are in Virtual mouse mode, move
the yellow mouse cursor to the top center of the
screen to display the OSD menu.
Split Screen Modes
In split screen mode the Virtual mouse cursor
can travel from one screen to the other.
10
PC Mouse
Switches from Virtual mouse to PC mouse. Note:
Works in split screen modes only.
Resolution
The default resolution is 1080p@60Hz. Click
this button to toggle between 4K@30Hz and the
default resolution. Note: If your monitor goes
blank after switching to 4K@30Hz, hold down
the Mode and Video front panel buttons
simultaneously for 10 seconds to reset the
resolution to default.
Zoom and Lock Function
Click this button to move, zoom, or lock the
screen. Note: Works in split screen modes only.
Zoom Lock
Indice
Altri manuali gofanco Interruttore
gofanco
gofanco Prophecy PRO-KVMaud4P Manuale utente
gofanco
gofanco Matrix44HD2-LT Manuale utente
gofanco
gofanco SwitchBYOD41 Manuale utente
gofanco
gofanco EthSwitch24P Manuale utente
gofanco
gofanco DPMST2DP Manuale utente
gofanco
gofanco HDRswitch3P Manuale utente
gofanco
gofanco USBCMST2DP Manuale utente
gofanco
gofanco Switcher5p Manuale utente
gofanco
gofanco USBCMST3VID Manuale utente
gofanco
gofanco Switch41-HD20 Manuale utente
gofanco
gofanco PRO-QuadView Manuale utente
gofanco
gofanco USBCMST2HD-4K60 Manuale utente
gofanco
gofanco KVMDP-2P Manuale utente
gofanco
gofanco Prophecy PRO-KVMDP-4P Manuale utente
gofanco
gofanco KVMHD2-4P Manuale utente
gofanco
gofanco Switch3P-HD20 Manuale utente
gofanco
gofanco DP14MST2HD Manuale utente
gofanco
gofanco Matrix88HD20-Pro Manuale utente
gofanco
gofanco mDPMST2DP Manuale utente
gofanco
gofanco HDRswitch5P Manuale utente
